 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Schottky barrier diode RB095B-40 Applications General rectification (Common cathode dual chip) Dimensions(Unit : mm) Land size figure(Unit : mm) 6.0 3)High reliability CPD 2.3 2.3 (2) Construction Silicon epitaxial planar Structure Taping dimensions(Unit : mm) (1) (3) Limits Symbol 45 VRM 40 VR 6 Io 45 IFSM 150 Tj -40 to +150 Tstg (*1) Business frequencies, Rating of R-load, 1/2 Io per diode, Tc=120C Reverse voltage (repetitive peak) Reverse voltage (DC) Average rectified forward current(*1) Forward current surge peak (60Hz1cyc)(*1) Junction temperature Storage temperature Absolute maximum ratings (Ta=25C) Parameter Unit V V A A C C Electrical characteristic (Ta=25C) Parameter Forward voltage Reverse current Thermal impedance Symbol VF IR jc Min. - Typ. - Max. 0.55 100 6.0 Unit V A C/W IF=3.0A VR=40V junction to case www.rohm.com (c)2009 ROHM Co., Ltd. All rights reserved. 1/3 2009.11 - Rev.F 3.0 2.0 Conditions Features 1)Power mold type.(CPD3) 2)Low VF 1.6 1.6 6.0 RB095B-40 Electrical characteristic curves 10 Data Sheet 1000000 Ta=150C 100000 Ta=-25C REVERSE CURRENT : IR(A) 10000 1000 100 1000 Ta=150C Ta=125C CAPACITANCE BETWEEN TERMINALS : Ct(pF) f=1MHz FORWARD CURRENT : IF(A) 1 Ta=125 Ta=25C Ta=75C Ta=75C 100 Ta=25C 10 1 0.1 0.01 0 5 10 15 20 25 30 35 REVERSE VOLTAGE : VR(V) VR-IR CHARACTERISTICS 40 Ta=-25C 0.1 10 0.01 1 0 5 10 15 20 25 30 REVERSE VOLTAGE : VR(V) VR-Ct CHARACTERISTICS 0 100 200 300 400 500 600 700 FORWARD VOLTAGE : V F(mV) VF-IF CHARACTERISTICS 500 FORWARD VOLTAGE : VF(mV) Ta=25C IF=3A n=30pcs 200 CAPACITANCE BETWEEN TERMINALS : Ct(pF) Ta=25C VR=40V n=30pcs 650 640 630 620 610 600 590 580 570 560 AVE:617.9pF Ta=25C f=1MHz VR=0V n=10pcs 490 REVERSE CURRENT : IR(A) 150 480 100 470 AVE:472.9mV 460 50 AVE:14.2A 0 450 VF DISPERSION MAP 550 IR DISPERSION MAP Ct DISPERSION MAP 300 RESERVE RECOVERY TIME : trr(ns) PEAK SURGE FORWARD CURRENT : IFSM(A) 250 200 150 100 50 AVE:76.0A 0 IFSM DISPERSION MAP 30 25 20 15 10 AVE:11.40ns 5 0 trr DISPERSION MAP Ta=25C IF=0.5A IR=1A Irr=0.25*IR n=10pcs 1000 PEAK SURGE FORWARD CURRENT : IFSM(A) Ifsm 8.3ms 1cyc Ifsm 8.3ms 100 8.3ms 1cyc 10 1 10 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS 100 1000 TRANSIENT C/W) THAERMAL IMPEDANCE : Rth ( PEAK SURGE FORWARD CURRENT : IFSM(A) 100 10 Rth(j-a) Rth(j-c) FORWARD POWER DISSIPATION : Pf(W) Ifs t 10 D=1/2 5 Sin(=180) DC 100 Mounted on epoxy board 1 IM=100mA IF=1A 1ms time 10 1 10 TIME : t(ms) IFSM-t CHARACTERISTICS 100 0.1 0.001 300s 0.01 0.1 1 10 100 1000 0 0 2 4 6 8 10 AVERAGE RECTIFIED FORWARD CURRENT : Io(A) Io-Pf CHARACTERISTICS TIME : t(s) Rth-t CHARACTERISTICS www.rohm.com (c)2009 ROHM Co., Ltd. All rights reserved. 2/3 2009.11 Rev.F RB095B-40 15 Data Sheet 15 10 0A 0V t DC Io AVERAGE RECTIFIED FORWARD CURRENT : Io(A) VR T D=t/T VR=20V Tj=150C 0A 0V t DC Io VR T D=t/T VR=20V Tj=150C 8 REVERSE POWER DISSIPATION : PR (W) AVERAGE RECTIFIED FORWARD CURRENT : Io(A) 10 10 D=1/2 6 D=1/2 4 DC 2 Sin(=180) D=1/2 5 5 Sin(=180) Sin(180) 0 0 10 20 30 40 REVERSE VOLTAGE : VR(V) VR-PR CHARACTERISTICS 0 0 25 50 75 100 125 150 0 0 25 50 75 100 125 150 AMBIENT TEMPERATURE : Ta(C) Derating Curve"(Io-Ta) CASE TEMPARATURE : Tc(C) Derating Curve"(Io-Tc) 30 ELECTROSTATIC DISCHARGE TEST ESD(KV) Np break at 30kV 25 20 15 AVE:15.6kV 10 5 0 C=200pF R=0 C=100pF R=1.5k ESD DISPERSION MAP www.rohm.com (c)2009 ROHM Co., Ltd. All rights reserved. 3/3 2009.11 Rev.F Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2009 ROHM Co., Ltd. All rights reserved. R0039A |
Price & Availability of RB095B-40
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |