|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
TM Application Specific Crystal Oscillator 5.0 x 3.2mm 2.5V CMOS Low-Jitter 62.5 MHz SAS-2 XO FDSAS2062 5.0 x 3.2mm Ceramic SMD ASSP XOTM for Storage Package: Product Features * Very low phase jitter - 0.5ps RMS * Thicker crystal for improved reliability * Low output current - 15mA max. * Low power stand by mode * Industrial Temperature Range * Pb-free & RoHS compliant Recommended Land Pattern: Product Description This is an enhanced high-frequency 3.3V, 62.5MHz crystal clock oscillator with superb jitter and low operating current for Serial Attached SCSI (SAS-1 & SAS-2) applications. The output clock signal, generated internally with a patented oscillator design, is compatible with LVCMOS logic levels. Pin Functions: Pin Function 1 2 3 4 OE Function Ground Clock Output V DD Applications * SAS-2 Hard Disk Drive *Extended high frequency power decoupling is recommended (see test circuit for minimum recommendation). To ensure optimal performance, do not route RF traces beneath the package. Part Ordering Information: FDSAS2062 SaRonix-eCeraTM is a Pericom(R) Semiconductor company * US: +1-408-435-0800 TW: +886-3-4518888 * www.pericom.com 05/13/10 1 All specifications are subject to change without notice. FDSAS2062 Rev C 2.5V CMOS Low-Jitter 62.5 MHz SAS-2 XO FDSAS2062 TM Application Specific Crystal Oscillator 5.0 x 3.2mm Electrical Performance Parameter Min. Typ. Max. Units Notes Output Frequency Supply Voltage Supply Current, Output Enabled Supply Current, Output Disabled Frequency Stability Operating Temperature Range Output Logic 0, VOL Output Logic 1, VOH Output Load Duty Cycle Rise and Fall Time Jitter, Phase RMS (1-) Jitter, pk-pk 45 90% V DD -20 2.375 62.5 2.5 2.625 15 10 50 +70 10% V DD 15 55 2 0.2 21 0.5 30 MHz V mA A ppm C V V pF % ns ps ps Measured 50% V DD Measured 20/80% of waveform 12kHz to 20 MHz frequency band 100.000 random periods See Note 1 below Notes: 1. Stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, initial calibration tolerance (25C), aging (1 year at 25C average effective ambient temperature), shock and vibration. 2. For specifications othere than those listed, please contact sales. Output Enable / Disable Function Parameter Min. Typ. Max. Units Notes Input Voltage (pin 1), Output Enable Input Voltage (pin 1), Output Disable (low power standby) Internal Pullup Resistance Output Disable Delay Output Enable Delay 0.7 V DD 0.3 V DD 30 200 2 V V k ns ms or open Output is Hi-Z Absolute Maximum Ratings Parameter Min. Typ. Max. Units Notes Storage Temperature -55 +125 C For the latest product information visit: http://www.pericom.com/products/timing/oscillators/FDSAS2062/ For test circuit go to: http://www.pericom.com/pdf/sre/tc_hcmos.pdf For soldering reflow profile and reliability test ratings go to: http://www.pericom.com/pdf/sre/reflow.pdf For typical phase noise go to: http://www.pericom.com/pdf/sre/pn_FDSAS2062.pdf For tape and reel information go to: http://www.pericom.com/pdf/sre/tr_5032.pdf SaRonix-eCeraTM is a Pericom(R) Semiconductor company * US: +1-408-435-0800 TW: +886-3-4518888 * www.pericom.com 05/13/10 2 All specifications are subject to change without notice. FDSAS2062 Rev C |
Price & Availability of FDSAS2062 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |