Part Number Hot Search : 
OPB706A MUR12 6408K F3704Z CTF25 TPF0712 CXA1846N E001281
Product Description
Full Text Search
 

To Download LTP-1557AE-01 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 LITE-ON TECHNOLOGY CORPORATION
Property of LITE-ON Only FEATURES
1.2 inch (30.42 mm) MATRIX HEIGHT LOW POWER REQUIREMENT SINGLE PLANE, WIDE VIEWING ANGLE SOLID STATE RELIABILITY 5 X 7 ARRAY WITH X-Y SELECT COMPATIBLE WITH USASCII AND EBCDIC CODES STACKABLE HORIZONTALLY CATEGORIZED FOR LUMINOUS INTENSITY
DESCRIPTION
The LTP-1557AE-01 is a 1.2 inch (30.42 mm) matrix height 5 X 7 dot matrix display. The device uses RED ORANGE LED chips, (GaAsP epi on GaP substrate). This display has a black face and white dot color.
DEVICE
PART NO. RED ORANGE LTP-1557AE-01 DESCRIPTION Cathode Column Anode Row
PART NO.: LTP-1557AE-01 BNS-OD-C131/A4
PAGE:
1 of 5
LITE-ON TECHNOLOGY CORPORATION
Property of LITE-ON Only PACKAGE DIMENSIONS
NOTES: All dimensions are in millimeters. Tolerances are 0.25 mm (0.01") unless otherwise noted.
INTERNAL CIRCUIT DIAGRAM
PART NO.: LTP-1557AE-01 BNS-OD-C131/A4
PAGE:
2 of 5
LITE-ON TECHNOLOGY CORPORATION
Property of LITE-ON Only PIN CONNECTION
No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 CONNECTION ANODE ROW ANODE ROW 5 7
CATHODE COLUMN 2 CATHODE COLUMN 3 ANODE ROW 4
CATHODE COLUMN 5 ANODE ROW ANODE ROW ANODE ROW 6 3 1
CATHODE COLUMN 4 CATHODE COLUMN 3 ANODE ROW 4
CATHODE COLUMN 1 ANODE ROW 2
PART NO.: LTP-1557AE-01 BNS-OD-C131/A4
PAGE:
3 of 5
LITE-ON TECHNOLOGY CORPORATION
Property of LITE-ON Only ABSOLUTE MAXIMUM RATING
PARAMETER Average Power Dissipation Per Dot ( Frequency 1Khz, 10% duty cycle ) Peak Forward Current Per Dot Average Forward Current Per Dot Derating Linear From 25J Per Dot Reverse Voltage Per Dot Operating Temperature Range MAXIMUM RATING 36 100* 13 0.17 5 -35J to +85J UNIT mW mA mA mA/J V
-35J to +85J Storage Temperature Range Soldering Conditions:1/16 inch below seating plane for 3 seconds at 260J
* see figure 5 to establish pulsed condition
ELECTRICAL / OPTICAL CHARACTERISTICS AT Ta = 25oC
PARAMETER Average Luminous Intensity Peak Emission Wavelength Spectral Line Half-Width Dominant Wavelength Forward Voltage any Dot Reverse Current any Dot Luminous Intensity Matching Ratio SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION IV p d VF IR IV-m 1780 4000 630 40 621 2.0 2.6 2.6 3.4 100 2:1 cd nm nm nm V A Ip = 80mA 1/16Duty IF = 20mA IF = 20mA IF = 20mA IF = 20mA IF = 80mA VR = 5V Ip = 80mA 1/16Duty
Note: Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (Commision Internationale De L'Eclairage) eye-response curve.
PART NO.: LTP-1557AE-01 BNS-OD-C131/A4
PAGE:
4 of 5
LITE-ON TECHNOLOGY CORPORATION
Property of LITE-ON Only TYPICAL ELECTRICAL / OPTICAL CHARACTERISTIC CURVES (25oC Ambient Temperature Unless Otherwise Noted)
PART NO.: LTP-1557AE-01 BNS-OD-C131/A4
PAGE:
5 of 5


▲Up To Search▲   

 
Price & Availability of LTP-1557AE-01

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X