 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs 67-11/T1C-KV2W1M/2T Features Fluorescence Type High Luminous Intensity High Efficiency Emission Color:x=0.29,y=0.30 ESD protection. Pb-free The product itself will remain within RoHS compliant version. Descriptions The white LED which was fabricated using a blue LED and a phosphor, and the phosphor is excited by blue light and emits yellow fluorescence. The mixture of blue light and yellow light results in a white emission. Applications OA Equipment Backlighting of Full Color LCD Automotive Equipment Replacement of Conventional Light Bulbs and Fluorescent Lamps Device Selection Guide Chip Lens Color Material InGaN Emitted Color Pure White Water Clear Everlight Electronics Co., Ltd. Device No.: DSE-671-415 http://www.everlight.com Date: 21-Sep-2006 Rev. 1 Page: 1 of 11 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 67-11/T1C-KV2W1M/2T Package Dimensions Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No.: DSE-671-415 http://www.everlight.com Date: 21-Sep-2006 Rev. 1 Page: 2 of 11 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 67-11/T1C-KV2W1M/2T Absolute Maximum Ratings (Ta=25) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current Peak Forward Current (Duty 1/10 @1KHz) Power Dissipation IF 25 mA IFP 100 mA Pd 110 mW Electrostatic Discharge(HBM) ESD 2000 V Operating Temperature Topr -40 ~ +85 Storage Temperature Tstg -40 ~ +90 Soldering Temperature Tsol Reflow Soldering : 260 for 10 sec. Hand Soldering : 350 for 3 sec. Max. 1420 -3.95 Units mcd deg V Condition IF=20mA IF=20mA IF=20mA Electro-Optical Characteristics (Ta=25) Parameter Luminous Intensity Viewing Angle Forward Voltage Symbol IV 21/2 VF Min. 900 -2.75 Typ. -----120 ----- Notes: 1.Tolerance of Luminous Intensity 10% 2.Tolerance of Forward Voltage 0.1V Everlight Electronics Co., Ltd. Device No.: DSE-671-415 http://www.everlight.com Date: 21-Sep-2006 Rev. 1 Page: 3 of 11 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 67-11/T1C-KV2W1M/2T Bin Range Of Luminous Intensity Bin Code V2 W1 Min. 900 1120 Max. 1120 1420 mcd IF=20mA Unit Condition Bin Range Of Forward Voltage Group Bin Code 5 6 M 7 8 3.35 3.65 3.65 3.95 Min. 2.75 3.05 Max. 3.05 3.35 V IF=20mA Unit Condition Notes: 1. Tolerance of Luminous Intensity 10% 2. Tolerance of Forward Voltage 0.1V Everlight Electronics Co., Ltd. Device No.: DSE-671-415 http://www.everlight.com Date: 21-Sep-2006 Rev. 1 Page: 4 of 11 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 67-11/T1C-KV2W1M/2T Group Bin Code CIE_x 0.2915 0.287 B5-1 0.297 0.3003 K 0.296 0.2915 B5-3 0.3003 0.3035 0.295 0.285 CIE_y 0.2855 0.295 0.305 0.295 0.276 0.2855 B5-4 0.309 0.311 0.3045 0.294 B5-2 Bin Code CIE_x 0.3003 0.297 0.307 0.309 0.3035 0.3003 CIE_y 0.295 0.305 0.315 0.3045 0.285 0.295 *The C.I.E. 1931 chromaticity diagram (Tolerance 0.01). 0.320 0.315 0.310 0.305 0.300 0.295 B5-2 B5-1 B5-4 B5-3 y 0.290 0.285 0.280 0.275 0.270 0.285 0.290 0.295 0.300 0.305 0.310 0.315 x Everlight Electronics Co., Ltd. Device No.: DSE-671-415 http://www.everlight.com Date: 21-Sep-2006 Rev. 1 Page: 5 of 11 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 67-11/T1C-KV2W1M/2T Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. Device No.: DSE-671-415 http://www.everlight.com Date: 21-Sep-2006 Rev. 1 Page: 6 of 11 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 67-11/T1C-KV2W1M/2T Label explanation CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is 0.1 mm , Unit = mm Everlight Electronics Co., Ltd. Device No.: DSE-671-415 http://www.everlight.com Date: 21-Sep-2006 Rev. 1 Page: 7 of 11 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 67-11/T1C-KV2W1M/2T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel. Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. Device No.: DSE-671-415 http://www.everlight.com Date: 21-Sep-2006 Rev. 1 Page: 8 of 11 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 67-11/T1C-KV2W1M/2T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% No. 1 2 Items Reflow Soldering Temperature Cycle Test Condition Temp. : 2605 Min. 5sec. H : +100 15min 5 min L : -40 15min H : +100 5min 10 sec L : -10 5min Temp. : 100 Temp. : -40 IF = 20 mA 85/ 85%RH Test Sample Ac/Re Hours/Cycles Size 6 Min. 22 PCS. 0/1 0/1 300 Cycles 22 PCS. 3 4 5 6 7 Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity 300 Cycles 22 PCS. 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs. 22 PCS. 22 PCS. 22 PCS. 22 PCS. 0/1 0/1 0/1 0/1 0/1 Everlight Electronics Co., Ltd. Device No.: DSE-671-415 http://www.everlight.com Date: 21-Sep-2006 Rev. 1 Page: 9 of 11 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 67-11/T1C-KV2W1M/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 C / Sec. 260C. Max. 10 Sec. Max. 1~5 C / Sec. Pre-heating 180~200C 60 Sec. Max. Above 220C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. Device No.: DSE-671-415 http://www.everlight.com Date: 21-Sep-2006 Rev. 1 Page: 10 of 11 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 67-11/T1C-KV2W1M/2T 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. Device No.: DSE-671-415 http://www.everlight.com Date: 21-Sep-2006 Rev. 1 Page: 11 of 11 Prepared by: Josh Chou |
Price & Availability of 67-11-T1C-KV2W1M-2T
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |