|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
IP4041CX25 10-channel integrated filter network with ESD input protection to IEC 61000-4-2 level 4 Rev. 01 -- 12 February 2010 Product data sheet 1. Product profile 1.1 General description The IP4041CX25 is a 10-channel RC low-pass filter array which is designed to provide filtering of undesired RF signals. In addition, the IP4041CX25 incorporates diodes to provide protection to downstream components from ElectroStatic Discharge (ESD) voltages as high as 20 kV contact according the IEC 61000-4-2 standard, far exceeding level 4. The IP4041CX25 is fabricated using monolithic silicon technology and integrates 10 resistors and 20 diodes in a single Wafer-Level Chip-Scale Package (WLCSP). These features make the IP4041CX25 ideal for use in applications requiring the utmost in miniaturization such as mobile phone handsets, cordless telephones and personal digital devices. 1.2 Features and benefits Pb-free, RoHS compliant and free of halogen and antimony (Dark Green compliant) 10-channel integrated -type RC filter network 200 series resistance; 50 pF (typical) channel capacitance Integrated ESD protection withstanding 20 kV contact discharge, far exceeding IEC 61000-4-2 level 4 WLCSP with 0.5 mm pitch 1.3 Applications Reduce ElectroMagnetic Interference (EMI) and Radio Frequency Interference (RFI) and provide downstream ESD protection for: Cellular and Personal Communication System (PCS) mobile handsets Cordless telephones Other appliances with low frequency signals (e.g. keypads) Wireless data (WAN/LAN) systems and PDAs NXP Semiconductors IP4041CX25 10-channel integrated filter network with ESD input protection 2. Pinning information 2.1 Pinning bump A1 index area 1 2 3 4 5 A B C D E 008aaa193 transparent top view, solder balls facing down Fig 1. Pin configuration IP4041CX25 2.2 Pin description Table 1. Pin A1 and E1 A2 and E2 A3 and E3 A4 and E4 A5 and E5 B1 and D1 B2 and D2 B3 and D3 B4 and D4 B5 and D5 C1 to C5 Pinning Description filter channel 1 filter channel 2 filter channel 3 filter channel 4 filter channel 5 filter channel 6 filter channel 7 filter channel 8 filter channel 9 filter channel 10 ground 3. Ordering information Table 2. Ordering information Package Name IP4041CX25 IP4041CX25_1 Type number Description wafer level chip-size package; 25 bumps; 2.41 x 2.41 x 0.65 mm All information provided in this document is subject to legal disclaimers. Version IP4041CX25 (c) NXP B.V. 2010. All rights reserved. WLCSP25 Product data sheet Rev. 01 -- 12 February 2010 2 of 12 NXP Semiconductors IP4041CX25 10-channel integrated filter network with ESD input protection 4. Functional diagram Rs(ch) A1, A2, A3, A4, A5, B1, B2, B3, B4, B5 D1, D2, D3, D4, D5, E1, E2, E3, E4, E5 C1, C2, C3, C4, C5 008aaa195 Fig 2. Schematic diagram IP4041CX25 5. Limiting values Table 3. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol VI VESD Parameter input voltage electrostatic discharge voltage all pins to ground contact discharge air discharge IEC 61000-4-2 level 4; all pins to ground contact discharge air discharge Pch Ptot Tstg Tamb [1] [1] [1] Conditions Min -0.5 -20 -20 Max +5.5 +20 +20 Unit V kV kV -8 -15 -55 +8 +15 50 500 +150 260 +85 kV kV mW mW C C C channel power dissipation total power dissipation storage temperature continuous power; Tamb = 70 C continuous power; Tamb = 70 C 10 s maximum Treflow(peak) peak reflow temperature ambient temperature -35 Device is qualified with 1 000 pulses of 15 kV contact discharges each, according to the IEC 61000-4-2 model and far exceeds the specified level 4 (8 kV contact discharge). IP4041CX25_1 All information provided in this document is subject to legal disclaimers. (c) NXP B.V. 2010. All rights reserved. Product data sheet Rev. 01 -- 12 February 2010 3 of 12 NXP Semiconductors IP4041CX25 10-channel integrated filter network with ESD input protection 6. Characteristics Table 4. Channel characteristics Tamb = 25 C; unless otherwise specified. Symbol Parameter Rs(ch) Cch VBR ILR channel series resistance channel capacitance breakdown voltage reverse leakage current Vbias(DC) = 0 V; f = 1 MHz Itest = 1 mA per channel; VI = 3.0 V Conditions Min 180 6 Typ 200 50 Max 220 15 25 Unit pF V nA Table 5. Frequency characteristics Tamb = 25 C; unless otherwise specified. Symbol Parameter il ct insertion loss crosstalk attenuation Conditions Rgen = 50 ; RL = 50 ; 800 MHz < f < 2.4 GHz 800 MHz < f < 6 GHz; Rgen = 50 ; RL = 50 adjacent channels; input: A1; output: D1; B1 and E1 terminated by 50 distant channels; input: A1; output: E5; E1 and A5 terminated by 50 1.0 kHz < f < 800 MHz; Rgen = 50 ; RL = 50 adjacent channels; input: A1; output: D1; B1 and E1 terminated by 50 distant channels; input: A1; output: E5; E1 and A5 terminated by 50 -47 -30 dB -30 -20 dB Min 30 Typ 35 Max Unit dB - -36 -20 dB - -55 -30 dB IP4041CX25_1 All information provided in this document is subject to legal disclaimers. (c) NXP B.V. 2010. All rights reserved. Product data sheet Rev. 01 -- 12 February 2010 4 of 12 NXP Semiconductors IP4041CX25 10-channel integrated filter network with ESD input protection 7. Application information 7.1 Insertion loss The insertion loss measurement configuration of a typical 50 NetWork Analyzer (NWA) system for evaluation of the IP4041CX25 is shown in Figure 3. The insertion loss of all channels for frequencies up to 6 GHz is displayed in Figure 4. IN 50 DUT OUT 50 on-device measurement Vgen 008aaa203 Fig 3. Frequency response measurement configuration 0 s21 (dB) -10 001aak682 -20 -30 (6) (7) (8) (9) (10) -40 (1) (2) (3) (4) (5) -50 1 10 102 103 f (MHz) 104 (1) Channel 10 (pins B5 and D5). (2) Channel 9 (pins B4 and D4). (3) Channel 8 (pins B3 and D3). (4) Channel 7 (pins B2 and D2). (5) Channel 6 (pins B1 and D1). (6) Channel 5 (pins A5 and E5). (7) Channel 4 (pins A4 and E4). (8) Channel 3 (pins A3 and E3). (9) Channel 2 (pins A2 and E2). (10) Channel 1 (pins A1 and E1). Fig 4. Measured insertion loss magnitudes IP4041CX25_1 All information provided in this document is subject to legal disclaimers. (c) NXP B.V. 2010. All rights reserved. Product data sheet Rev. 01 -- 12 February 2010 5 of 12 NXP Semiconductors IP4041CX25 10-channel integrated filter network with ESD input protection 7.2 Crosstalk The crosstalk measurement configuration of a typical 50 NWA system for evaluation of the IP4041CX25 is shown in Figure 5. The measured crosstalk within the IP4041CX25 in a 50 NWA system from one channel to another is shown in Figure 6 for different pairs of channels representing the worst case (channels 1 and 2, channels 6 and 7) and the best case (channels 6 and 10, channels 1 and 5) conditions in terms of physical distance. In all cases the crosstalk is measured for two pins. One is very close to the input while the other is relatively far away. Unused connections are terminated with 50 to ground. IN_1 50 DUT OUT_2 OUT_1 50 50 IN_2 50 TEST BOARD Vgen 001aai756 Fig 5. Crosstalk measurement configuration -10 ct (dB) -30 (1) (2) (3) (4) 001aak681 -50 -70 -90 10-1 1 10 102 103 f (MHz) 104 (1) Channels 1 and 2 (pins A1 and E2). (2) Channels 6 and 10 (pins B1 and D5). (3) Channels 6 and 7 (pins B1 and D2). (4) Channels 1 and 5 (pins A1 and E5). Fig 6. Measured crosstalk between adjacent channels IP4041CX25_1 All information provided in this document is subject to legal disclaimers. (c) NXP B.V. 2010. All rights reserved. Product data sheet Rev. 01 -- 12 February 2010 6 of 12 NXP Semiconductors IP4041CX25 10-channel integrated filter network with ESD input protection 8. Package outline WLCSP25: wafer level chip-size package; 25 bumps (5 x 5) D bump A1 index area A2 E A A1 detail X e1 e b E e D e1 C B A European projection 1 2 3 4 5 X wlcsp25_5x5_po Fig 7. Table 6. Symbol A A1 A2 b D E e e1 Package outline IP4041CX25 (WLCSP25) Dimensions for Figure 7 Min 0.60 0.22 0.38 0.27 2.36 2.36 Typ 0.65 0.24 0.41 0.32 2.41 2.41 0.5 2.0 Max 0.70 0.26 0.44 0.37 2.46 2.46 Unit mm mm mm mm mm mm mm mm IP4041CX25_1 All information provided in this document is subject to legal disclaimers. (c) NXP B.V. 2010. All rights reserved. Product data sheet Rev. 01 -- 12 February 2010 7 of 12 NXP Semiconductors IP4041CX25 10-channel integrated filter network with ESD input protection 9. Design and assembly recommendations 9.1 PCB design guidelines For optimum performance it is recommended to use a Non-Solder Mask PCB Design (NSMD), also known as a copper-defined design, incorporating laser-drilled micro-vias connecting the ground pads to a buried ground-plane layer. This results in the lowest possible ground inductance and provides the best high frequency and ESD performance. For this case, refer to Table 7 for the recommended PCB design parameters. Table 7. Parameter PCB pad diameter Micro-via diameter Solder mask aperture diameter Copper thickness Copper finish PCB material Recommended PCB design parameters Value or specification 200 m 100 m (0.004 inch) 370 m 20 m to 40 m AuNi FR4 9.2 PCB assembly guidelines for Pb-free soldering Table 8. Parameter Solder screen aperture diameter Solder screen thickness Solder paste: Pb-free Solder / flux ratio Solder reflow profile Assembly recommendations Value or specification 330 m 100 m (0.004 inch) SnAg (3 % to 4 %) Cu (0.5 % to 0.9 %) 50 / 50 see Figure 8 T (C) Treflow(peak) 250 230 217 cooling rate pre-heat t1 t2 t3 t4 t5 t (s) 001aai943 The device is capable of withstanding at least three reflows of this profile. Fig 8. IP4041CX25_1 Pb-free solder reflow profile All information provided in this document is subject to legal disclaimers. (c) NXP B.V. 2010. All rights reserved. Product data sheet Rev. 01 -- 12 February 2010 8 of 12 NXP Semiconductors IP4041CX25 10-channel integrated filter network with ESD input protection Characteristics Parameter time 1 time 2 time 3 time 4 time 5 rate of change of temperature cooling rate pre-heat Conditions soak time time during T 250 C time during T 230 C time during T > 217 C Min 230 60 10 30 2.5 Typ Max 260 180 30 50 150 540 -6 4.0 Unit C s s s s s C/s C/s Table 9. Symbol t1 t2 t3 t4 t5 dT/dt Treflow(peak) peak reflow temperature 10. Abbreviations Table 10. Acronym DUT EMI ESD FR4 LAN NSMD PCB PCS RFI RoHS WAN WLCSP Abbreviations Description Device Under Test ElectroMagnetic Interference ElectroStatic Discharge Flame Retard 4 Local Area Network Non-Solder Mask PCB Design Printed-Circuit Board Personal Communication System Radio Frequency Interference Restriction of Hazardous Substances Wide Area Network Wafer-Level Chip-Scale Package 11. Revision history Table 11. Revision history Release date 20100212 Data sheet status Product data sheet Change notice Supersedes Document ID IP4041CX25_1 IP4041CX25_1 All information provided in this document is subject to legal disclaimers. (c) NXP B.V. 2010. All rights reserved. Product data sheet Rev. 01 -- 12 February 2010 9 of 12 NXP Semiconductors IP4041CX25 10-channel integrated filter network with ESD input protection 12. Legal information 12.1 Data sheet status Document status[1][2] Objective [short] data sheet Preliminary [short] data sheet Product [short] data sheet [1] [2] [3] Product status[3] Development Qualification Production Definition This document contains data from the objective specification for product development. This document contains data from the preliminary specification. This document contains the product specification. Please consult the most recently issued document before initiating or completing a design. The term `short data sheet' is explained in section "Definitions". The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. 12.2 Definitions Draft -- The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet -- A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification -- The information and data provided in a Product data sheet shall define the specification of the product as agreed between NXP Semiconductors and its customer, unless NXP Semiconductors and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the NXP Semiconductors product is deemed to offer functions and qualities beyond those described in the Product data sheet. malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. Applications -- Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on a weakness or default in the customer application/use or the application/use of customer's third party customer(s) (hereinafter both referred to as "Application"). It is customer's sole responsibility to check whether the NXP Semiconductors product is suitable and fit for the Application planned. Customer has to do all necessary testing for the Application in order to avoid a default of the Application and the product. NXP Semiconductors does not accept any liability in this respect. Limiting values -- Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale -- NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. NXP Semiconductors hereby expressly objects to applying the customer's general terms and conditions with regard to the purchase of NXP Semiconductors products by customer. No offer to sell or license -- Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control -- This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities. Non-automotive qualified products -- Unless the data sheet of an NXP Semiconductors product expressly states that the product is automotive qualified, the product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. NXP Semiconductors accepts no liability for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. In the event that customer uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without NXP Semiconductors' warranty of the (c) NXP B.V. 2010. All rights reserved. 12.3 Disclaimers Limited warranty and liability -- Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors' aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of NXP Semiconductors. Right to make changes -- NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use -- NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or IP4041CX25_1 All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 01 -- 12 February 2010 10 of 12 NXP Semiconductors IP4041CX25 10-channel integrated filter network with ESD input protection product for such automotive applications, use and specifications, and (b) whenever customer uses the product for automotive applications beyond NXP Semiconductors' specifications such use shall be solely at customer's own risk, and (c) customer fully indemnifies NXP Semiconductors for any liability, damages or failed product claims resulting from customer design and use of the product for automotive applications beyond NXP Semiconductors' standard warranty and NXP Semiconductors' product specifications. 12.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 13. Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com IP4041CX25_1 All information provided in this document is subject to legal disclaimers. (c) NXP B.V. 2010. All rights reserved. Product data sheet Rev. 01 -- 12 February 2010 11 of 12 NXP Semiconductors IP4041CX25 10-channel integrated filter network with ESD input protection 14. Contents 1 1.1 1.2 1.3 2 2.1 2.2 3 4 5 6 7 7.1 7.2 8 9 9.1 9.2 10 11 12 12.1 12.2 12.3 12.4 13 14 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General description . . . . . . . . . . . . . . . . . . . . . 1 Features and benefits . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Pinning information . . . . . . . . . . . . . . . . . . . . . . 2 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 2 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Functional diagram . . . . . . . . . . . . . . . . . . . . . . 3 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Application information. . . . . . . . . . . . . . . . . . . 5 Insertion loss . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Crosstalk. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 7 Design and assembly recommendations . . . . 8 PCB design guidelines . . . . . . . . . . . . . . . . . . . 8 PCB assembly guidelines for Pb-free soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . 9 Legal information. . . . . . . . . . . . . . . . . . . . . . . 10 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 10 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Contact information. . . . . . . . . . . . . . . . . . . . . 11 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section `Legal information'. (c) NXP B.V. 2010. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 12 February 2010 Document identifier: IP4041CX25_1 |
Price & Availability of IP4041CX25 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |