 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Narrow-Band Power-Line Communications Slave Modem IC with Networking Stack ADE8155 FEATURES Narrow-band power-line communications IC Integrates PHY through networking layer Simple host interface Application layer Supports DL/T 645-1997 or -2007 China-specific protocol as well as passthrough option Networking layer Master/slave architecture Designed to work with ADE8165 master PLC modem ICs, which support Dynamic routing Automatic discovery of authenticated devices Logical address management Data link layer Automatic baud rate negotiation Up to 63-byte packet support Physical layer CPFSK modulation Choice of two frequency bands Carrier frequencies: 105.5 kHz and 118.7 kHz Carrier frequencies: 74.9 kHz and 84.2 kHz Up to 800 bps on a 1-phase network and 2400 bps on a 3-phase network Zero-crossing synchronized receive/transmit 6-byte physical address for logical address assignment Communication interface UART Option to use DL/T 645-1997 or -2007 China-specific application layer interface Package and temperature range 40-lead 6 mm x 6 mm LFCSP Fully specified for -40C to +85C operation GENERAL DESCRIPTION The ADE81551 incorporates a high performance ADC and DAC to create a very robust CPFSK power-line communications IC complete with networking functionality. The ADE8155 slave modem IC is designed to work with the ADE8165 master modem IC for a complete power-line communication system. In an advanced metering infrastructure (AMI) scenario, the ADE8155 slave modem IC is used to connect the energy meter to the power line. Then the ADE8165 master PLC modem is used near the transformer to communicate with multiple meters on one phase. The power-line communication is independent on each phase; therefore, three ADE8165 master PLC modem ICs are used in a PLC module within the concentrator to read meters on all three phases. A UART communication interface is supported. For more information on the ADE8155, contact your local sales office at Analog Devices, Inc. 1 US patents pending. FUNCTIONAL BLOCK DIAGRAM CONNECT_LED 10 ATU/RXEN 26 INSTALL 21 EVENT 33 STA 30 CENELEC_B 31 ZX 20 VMON 39 PHY DLL 26 ATU/RXEN 32 TXEN 11 RX_LED NL UART 23 RX 22 TX 29 RS485_OE PLC_RX+ 37 PLC_RX- 38 OSC 24 25 19 12-BIT ADC DEMODULATOR MODULATOR DAC 6 PLC_TX LDO 15 16 14 17 ADE8155 36 35 34 5 07840-001 XTAL0 XTAL1 RST VDD VINTD DGND DGND AVDD AGND VREF AGND Figure 1. Rev. Sp0 Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 www.analog.com Fax: 781.461.3113 (c)2010 Analog Devices, Inc. All rights reserved. ADE8155 NOTES (c)2010 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D07840F-0-4/10(Sp0) Rev. Sp0 | Page 2 of 2 |
Price & Availability of ADE8155
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |