 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 30W Single Output Switching Power Supply Features : Universal AC input / Full range PLN-30 series Fully isolated plastic case with IP64 level Built-in constant current limiting circuit with adjustable OCP level Protections:Short circuit/Over load/Over voltage/Over temperature Built-in active PFC function IP64 design for indoor or outdoor installations Cooling by free air convection 100% full load burn-in test High reliability Suitable for LED lighting and moving sign applications 2 years warranty F 110 M M SELV EQUIVALENT SPECIFICATION MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT VOLTAGE ADJ. RANGE Note.5 VOLTAGE TOLERANCE Note.3 LINE REGULATION LOAD REGULATION SETUP, RISE TIME VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR INPUT EFFICIENCY(Typ.) AC CURRENT INRUSH CURRENT(max.) LEAKAGE CURRENT OVER CURRENT SHORT CIRCUIT PROTECTION OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE Note.4 LPS PLN-30-24 24V 16.8 ~ 24V 1.25A 0 ~ 1.25A 30W 2.6Vp-p ( except for 48V ) IP64 PLN-30-36 36V 25.2 ~ 36V 0.84A 0 ~ 0.84A 30.24W 4.5Vp-p PLN-30-48 48V 33.6 ~ 48V 0.63A 0 ~ 0.63A 30.24W 3.7Vp-p PLN-30-9 9V 3.3A 0 ~ 3.3A 29.7W CONSTANT CURRENT REGION Note.6 6.3 ~ 9V PLN-30-12 12V 8.4 ~ 12V 2.5A 0 ~ 2.5A 30W 2Vp-p PLN-30-15 15V 10.5 ~ 15V 2A 0 ~ 2A 30W 2.6Vp-p PLN-30-20 20V 14 ~ 20V 1.5A 0 ~ 1.5A 30W 2Vp-p PLN-30-27 27V 18.9 ~ 27V 1.12A 0 ~ 1.12A 30.24W 2.3Vp-p RIPPLE & NOISE (max.) Note.2 2.6Vp-p 10%. Can be adjusted by internal potential meter SVR1 10% 3.0% 10% 1500ms, 150ms / 230VAC 3000ms, 150ms / 115VAC at full load 90 ~ 264VAC 47 ~ 63Hz PF>0.9/230VAC 80% 0.4A/115VAC 40A/230VAC 0.5mA / 240VAC 110 ~ 120% Protection type : Constant current limiting, recovers automatically after fault condition is removed Hiccup mode, recovers automatically after fault condition is removed. 10 ~ 14V 14 ~ 16V 17 ~ 22V 23 ~ 26V 27 ~ 34V Protection type : Shut down o/p voltage, re-power on to recover 90 10 (TSW1) (Refer to output load derating curve) , 10 ~ 95% RH (0 ~ 50 ) Protection type : Shut down o/p voltage, re-power on to recover -30 ~ +50 -40 ~ +80 0.06%/ 20 ~ 90% RH non-condensing 31 ~ 35V 40 ~ 50V 53 ~ 63V 83% 0.2A/230VAC PF>0.95/115VAC at full load 84% 84% 85% 85% 86% 86% 127 ~ 370VDC CURRENT ADJ. RANGE Note.5 3% ~ -25%. Can be adjusted by internal potential meter SVR2 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes TUV EN61347-1, EN61347-2-13, CAN/CSA C22.2 No. 223-M91(except for 48V), IP64 approved I/P-O/P:3KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH EMC EMI CONDUCTION & RADIATION Compliance to EN55015 Compliance to EN61000-3-2 Class C (>80% load), Class D (>50% load) ; EN61000-3-3 HARMONIC CURRENT EMS IMMUNITY MTBF OTHERS DIMENSION PACKING NOTE Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, EN61547, light industry level, criteria A 621.4Khrs min. MIL-HDBK-217F (25 145*47*30mm (L*W*H) 0.22Kg; 60pcs/14.2Kg/1.25CUFT ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Please refer to OLP characteristics. 5. Output voltage can be adjusted through the SVR1 on the PCB; limit of output constant current level can be adjusted through the SVR2 on the PCB. 6. Constant current operation region is within 70% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please reconfirm special electrical requirements for some specific system design. File Name:PLN-30-SPEC 2008-08-18 30W Single Output Switching Power Supply Mechanical Specification 145 4.38 PLN-30 Case No.964A series Unit:mm 9.83 2-R2.25 320 10 +V(Red) -V(Black) 47 320 10 AC/L(Brown) AC/N(Blue) 18AWG 2C 4.38 9.83 18AWG 2C Output voltage and current adjustment : remove the upper case and adjust through SVR1 & SVR2 shown in the diagram. SVR1 SVR2 SVR1 Output voltage adjustment SVR2 Output current adjustment Block Diagram I/P EMI FILTER & RECTIFIERS POWER SWITCHING RECTIFIERS & FILTER DETECTION CIRCUIT PWM & PFC CONTROL O.V.P. fosc : 39KHz(115VAC) 53KHz(230VAC) +V -V O.L.P. O.C.P. Derating Curve OLP Characteristics 100 100 80 Constant Current VO (%) 60 70 (max.) LOAD (%) 40 20 Hiccup Mode -30 -25 -5 0 15 30 40 50 60 0 50 100 110 120 AMBIENT TEMPERATURE ( ) IO(%) File Name:PLN-30-SPEC 2008-08-18 30 |
Price & Availability of PLN-30
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |