View VX6852Q038T2_4792169.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

VX6852
QXGA EDOF camera module
Data Brief
Features

3.15 megapixel resolution sensor (2048 x 1536) Extended Depth of Field (EDOF) High quality lens Compact size: 6.5 mm x 6.5 mm x 4.6 mm Video data interface - CCP2.0 Command interface - CCI Analog power supply from 2.4 V to 2.9 V Digital power supply from 1.7 V to 1.9 V On-board 10 bit ADC Integral EMC shielding and EMI reduction techniques Ultra low power standby mode Analog Binning (2x2) for higher image quality in video mode RoHS (lead-free) package
A separate hardware accelerator (STV0986) or application engine (STn8815) device can be incorporated in the phone system to run the associated image processing algorithms in hardware where the baseband cannot support this processing load. The specifications of these devices are contained in a separate document. Figure 1. VX6852 block diagram
VX6852
EXTCLK XSHUTDOWN PLL and Clock Management Power Mgmt CCI Receiver Sensor Control Registers Power-On Reset 3.15 Mpixel Pixel array 1152 x 864 VDIG DGND
SCL SDA CLKP CLKN DATAP DATAN
CCP2.0 Transmitter
Readout
Frame formatter
Y Decoder
VANA AGND
Column ADC X Decoder Line SRAM
Description
This data brief outlines a high performance 3.15 megapixel EDOF camera module (VX6852) for use across a range of mobile phone handsets and accessories. It is designed to be used for high quality still camera functions and also supports low power video modes. The product can output raw bayer 3 Mpixel images at up to 20 fps. The module design is optimized for both footprint and height. The module is always in focus from 30 cm to infinity. All components are integrated inside the camera module, with the exception of two CCI pull-up resistors and a de-coupling capacitor. VX6852 offers an ultra low power consumption hardware standby mode consuming less than 30 W (typ.).
Figure 2.
VX6852 3.15 MP camera module
VX6852 application diagram
STV0986 processor Baseband or Application Processor
CLK PDN CCI CCP2.0
CLK PDN I2C CCP2.0 or ITU
VX6852 3.15 MP camera module
CLK PDN CCI CCP2.0
Baseband or Application Processor Rx'er
May 2008
Rev 3
1/4
www.st.com
4
For further information contact your local STMicroelectronics sales office.
Technical specifications
VX6852
1
Technical specifications
Table 1. Technical specifications
Parameter Pixel resolution Sensor technology Pixel size Exposure control Analogue gain Digital gain Dynamic range Signal to noise Supply voltages Average power consumption Package size (lxwxh) Lens TV distortion Relative illumination System attach 2048 x 1536 (QXGA) ST IMG175 process 1.75 m x 1.75 m + 81 dB + 24 dB (max) + 6 dB (max) 60 dB 36 dB (@ 100 lux) Analogue: 2.4 V to 2.9 V Digital: 1.7 V to 1.9 V <200 mW (Viewfinder mode) <460 mW (Capture mode) 6.5 mm x 6.5 mm x 4.6 mm 58 +/-2 HFOV F/2.6 <-0.28%, <+0.5% 40 % (typ.) SMIA65 socket Description
2
Ordering information
Table 2. Ordering information
Package SMIA65 for socket attachment Packing Tape and reel
Order code VX6852Q038/T2(1)
1. ECOPACK(R) package
2/4
VX6852
Revision history
3
Revision history
Table 3.
Date 07-Feb-2008
Document revision history
Revision 1 Initial release. Corrected the digital supply voltage maximum value in Features and Table 1: Technical specifications. Corrected the TV distortion minimum value and the relative illumination value in Table 1: Technical specifications. Updated the second paragraph of the Description. Removed references to SMIA standard. Changed the F# in Table 1: Technical specifications. Changes
11-Feb-2008
2
22-May-2008
3
3/4
VX6852
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
4/4

▲Up To Search▲

Price & Availability of VX6852Q038T2

	To Download VX6852Q038T2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .