|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Oscilent Corporation IF SAW Filter | 820-IF70.0M-GB Page 1 of 3 IF SAW Filter Part Number Package Application Last Modified 820-IF70.0M-GB . TYPE : 20.2 x 12.6mm IF SAW Filter Mar. 10, 2007 70MHz SAW Filter PART NUMBER : 820-IF70.0M-GB .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency (Fo) Insertion Loss at Fo Source Impedance (single ended)* Load Impedance (single ended)* Bandwidth -1.0 dB Bandwidth -3.0 dB Bandwidth -40.0 dB Lower Sidelobe Upper Sidelobe Amplitude Ripple (Fo +/-9.75MHz) Group Delay Variation(Fo +/-9.75MHz) Absolute Delay @ Fo Temperature Coefficient Minimum 69.92 20.3 Typical 70.0 23.0 50 50 20.10 20.40 21.70 55 55 0.7 60 2.35 -72 Maximum 70.08 24.2 21.80 1.0 100 Units MHz dB ohm ohm MHz MHz MHz dB dB dBp-p nsec sec ppm/C *With Matching Network(ref. Testing Enviornment Circut as shown below). Those impedances could be modified with different impedance values and/or structures, if necessary. . PACKAGE OUTLINE (mm) Oscilent Corporation IF SAW Filter | 820-IF70.0M-GB Page 2 of 3 PIN Descriptions: IN-10, OUT-5, GROUND-2,3,4,6, TEST FIXTURE FREQUENCY RESPONSE Oscilent Corporation IF SAW Filter | 820-IF70.0M-GB Page 3 of 3 Part No.: 820-IF70.0M-GB Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map |
Price & Availability of 820-IF700M-GB |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |