 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Approved by: Checked by: Issued by: SPECIFICATION PRODUCT: SAW FILTER MODEL: HF4504M M1967M SIP5K HOPE MICROELECTRONICS CO.,LIMITED Tel:+86-755-82973806 Fax:+86-755-82973550 E-mail: sales@hoperf.com http://www.hoperf.com Page 1 of 1 1.Construction 1.1 Dimension and materials Type : F4504M 1.2. Circuit construction, measurement circuit 2.Characteristics Standard atmospheric conditions Unless otherwise specified , the standard rang of atmospheric conditions for making measurements and tests is as follows; Ambient temperature : 15 to 35 Relative humidity : 25% to 85% Air pressure : 86kPa to 106kPa 1 Operating temperature rang Operating temperature rang is the rang of ambient temperatures in which the filter can be operated continuously. -10 ~ +60 Storage temperature rang Storage temperature rang is the rang of ambient temperatures at which the filter can be stored without damage. Conditions are as specified elsewhere in these specifications. -40 ~ +70 Reference temperature 2.1 Maximum Rating DC voltage VDC AC voltage Vpp 2.2 Electrical Characteristics Source impedance Load impedance Insertion attenuation Reference level +25 12 10 V V Between any terminals Between any terminals ZS=50 ZL=2k//3pF Min typ max TA=25 12.7 6.0 1.0 3.0 7.4 19.1 50.0 48.0 14.7 7.5 2.5 21.1 dB dB dB dB dB dB dB dB dB dB k|| pF k|| pF ppm/k Freq 44.06MHz 10.7 4.5 -0.5 17.1 42.0 40.0 35.0 35.0 - 45.81MHz 42.23MHz 41.98MHz Relative attenuation 41.73MHZ 41.31MHz 39.81MHz 47.31MHz 35.06~39.81MHz Sidelobe 47.31~55.06MHz Impedance at 44,06 MHz Input: Z IN = R IN || C IN Output: Z OUT = R OUT || C OUT Temperature coefficient 0,9 || 14,9 - 0,9 || 4,1 -72 2.3 Environmental Performance Characteristics Item Test condition Allowable change of absolute Level at center frequency(dB) High temperature test < 1.0 70 1000H Low temperature test < 1.0 -40 1000H Humidity test < 1.0 40 90-95% 1000H 2 Thermal shock -20==25==80 20 cycle 30M 10M 30M Solder temperature test Sold temp.260 for 10 sec. Soldering Immerse the pins melt solder at 260+5/-0 for 5 sec. 2.4 Mechanical Test Item Test condition Vibration test 600-3300rpm amplitude 1.5mm 3 directions 2 H each Drop test On maple plate from 1 m high 3 times Lead pull test Pull with 1 kg force for 30 seconds Lead bend test 90o bending with 500g weigh 2 times 2.5 Voltage Discharge Test Item Test condition Surge test Between any two electrode < 1.0 < 1.0 More then 95% of total area of the pins should be covered with solder Allowable change of absolute Level at center frequency(dB) <1.0 <1.0 <1.0 <1.0 Allowable change of absolute Level at center frequency(dB) <1.0 3 2.6 Frequency response 4 |
Price & Availability of HF4504MSIP5K
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |