View HMC813_4931936.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HMC813
v00.1210
SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA) WITH LIMITED RF OUTPUT, 1 - 26 GHz
Typical Applications
the HMC813 is ideal for: * ew, eLINt & IFM receivers * DF radar systems * ecM systems * Broadband test & Measurement * Power Measurement & control circuits * Military & space Applications
Features
High Logging range: 55 dB Frequency Flatness: 1.5 dB saturated output Power: -7 dBm Fast rise/Fall times: 4/10 ns single Positive supply: +3.3V esD sensitivity (HBM): class 1A -55 to +85 c operating temperature
5
Power Detectors - cHIP
Functional Diagram
General Description
the HMC813 is a successive Detection Log Video Amplifier (sDLVA) with a limited rF output which operates from 1 to 26 GHz. the HMC813 provides a logging range of 55 dB. this device offers typical fast rise/fall times of 4/10 ns. the HMC813 log video output slope is typically 14.5 mV/dB. Maximum recovery times are less than 20 ns. Ideal for high speed channelized receiver applications, the HMC813 operates from a single +3.3 V supply, and consumes only 150 mA. All data shown herein is measured with the chip in a 50 ohm environment and contacted with rF probes.
Electrical Specifications, TA = +25 C, Vcc1 = Vcc2 = Vcc3 = Vcc4 = 3.3V [1]
Parameter Input Frequency range Frequency Flatness (Video out) Log Linearity Log Linearity over temperature Minimum Logging range Maximum Logging range saturated output Power, Psat saturated output Power Flatness rF Input return Loss rF output return Loss Log Video Minimum output Voltage Log Video Maximum output Voltage Log Video output rise time Log Video output Fall time [1] electrical specs and performance plots are given for single-ended operation Pin = 0 dBm, 10% to 90% Pin = 0 dBm, 90% to 10% Pin = -25 dBm Pin = -40 dBm to +0 dBm -55 to +85 c, Pin = -20 dBm to 3 dB error @ 18 GHz to 3 dB error @ 18 GHz conditions typ. 1 - 26 1.5 1 0.5 -53 6 -7 2.5 7 13 0.875 1.65 4 10 Units GHz dB dB dB dBm dBm dBm dB dB dB V V ns ns
5-1
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com
HMC813
SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA) WITH LIMITED RF OUTPUT, 1 - 26 GHz
Electrical Specifications, (continued) [1]
Parameter Log Video recovery time Log Video output slope Log Video output slope Variation over temperature Log Video Propagation Delay supply current (Idc) [1] electrical specs and performance plots are given for single-ended operation @ 10 GHz conditions -50 dBm to 0 dBm typ. 20 14.5 3 15 150 Units ns mV/dB V/dBc ns mA v00.1210
5
VIDEO OUT & Error vs. Input Power, Fin = 1 GHz [1]
2
Ideal Video Out +25C Video Out +85C Video Out -55C
VIDEO OUT & Error vs. Input Power, Fin = 2 GHz [1]
3 2 VIDEO OUT (V) 1 ERROR (dB) 0 1.5 2
Ideal Video Out +25C Video Out +85C Video Out -55C
3 2 1 ERROR (dB) 0
VIDEO OUT (V)
1.5
1
ERR +25C ERR +85C ERR -55C
-1 -2 -3 -50 -40 -30 -20 -10 0 10 INPUT POWER (dBm)
1
ERR +25C ERR +85C ERR -55C
-1 -2 -3 -50 -40 -30 -20 -10 0 10 INPUT POWER (dBm)
0.5 -60
0.5 -60
VIDEO OUT & Error vs. Input Power, Fin = 6 GHz [1]
2
Ideal Video Out +25C Video Out +85C Video Out -55C
VIDEO OUT & Error vs. Input Power, Fin = 10 GHz [1]
3 2 VIDEO OUT (V) 1 ERROR (dB) 0 1.5 2
Ideal Video Out +25C Video Out +85C Video Out -55C
3 2 1 ERROR (dB) 0
VIDEO OUT (V)
1.5
1
ERR +25C ERR +85C ERR -55C
-1 -2 -3 -50 -40 -30 -20 -10 0 10 INPUT POWER (dBm)
1
ERR +25C ERR +85C ERR -55C
-1 -2 -3 -50 -40 -30 -20 -10 0 10 INPUT POWER (dBm)
0.5 -60
0.5 -60
[1] electrical specs and performance plots are given for single-ended operation
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com
5-2
Power Detectors - cHIP
HMC813
SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA) WITH LIMITED RF OUTPUT, 1 - 26 GHz
VIDEO OUT & Error vs. Input Power, Fin = 14 GHz [1]
2
Ideal Video Out +25C Video Out +85C Video Out -55C
v00.1210
VIDEO OUT & Error vs. Input Power, Fin = 18 GHz [1]
3 2 VIDEO OUT (V) 1 ERROR (dB) 0 1.5 2
Ideal Video Out +25C Video Out +85C Video Out -55C
3 2 1 ERROR (dB) 0
VIDEO OUT (V)
1.5
1
ERR +25C ERR +85C ERR -55C
-1 -2 -3 -50 -40 -30 -20 -10 0 10 INPUT POWER (dBm)
1
ERR +25C ERR +85C ERR -55C
-1 -2 -3 -50 -40 -30 -20 -10 0 10 INPUT POWER (dBm)
5
Power Detectors - cHIP
0.5 -60
0.5 -60
VIDEO OUT vs. Error vs. Input Power, Fin = 20 GHz [1]
2
Ideal Video Out +25C Video Out +85C Video Out -55C
VIDEO OUT & Error vs. Input Power, Fin = 22 GHz [1]
3 2 VIDEO OUT (V) 1 ERROR (dB) 0 1.5 2
Ideal Video Out +25C Video Out +85C Video Out -55C
3 2 1 ERROR (dB) 0
VIDEO OUT (V)
1.5
1
ERR +25C ERR +85C ERR -55C
-1 -2 -3 -50 -40 -30 -20 -10 0 10 INPUT POWER (dBm)
1
ERR +25C ERR +85C ERR -55C
-1 -2 -3 -50 -40 -30 -20 -10 0 10 INPUT POWER (dBm)
0.5 -60
0.5 -60
VIDEO OUT & Error vs. Input Power, Fin = 26 GHz [1]
2
Ideal Video Out +25C Video Out +85C Video Out -55C
3 2 1 ERROR (dB) 0
VIDEO OUT (V)
1.5
1
ERR +25C ERR +85C ERR -55C
-1 -2 -3 -50 -40 -30 -20 -10 0 10 INPUT POWER (dBm)
0.5 -60
[1] electrical specs and performance plots are given for single-ended operation
5-3
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com
HMC813
SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA) WITH LIMITED RF OUTPUT, 1 - 26 GHz
VIDEO OUT vs. Frequency Over Input Power & Temperature [1]
1.7 RF OUTPUT POWER (dBm) 1.6 1.5 VIDEO OUT (V) 1.4 1.3 1.2 1.1 1 0.9 0 5 10 15 20 25 30 -25 0 5 10 15
-40 dBm -25 dBm -10 dBm +25C +85C -55C
v00.1210
Saturated RF Output Power vs. Frequency Over Temperature @ Pin = -10 dBm [1]
0
-5
-10
-15
+25C +85C -55C
-20
20
25
30
5
Power Detectors - cHIP
5-4
FREQUENCY (GHz)
FREQUENCY (GHz)
RF Output Power vs. Input Power Over Frequency [1]
0 RF OUTPUT POWER (dBm) -5 -10 -15 -20 -25 -30 -50
Return Loss vs. Frequency Over Temperature [1]
0
-5 RETURN LOSS (dB)
RF INPUT
-10
2 GHz 10 GHz 20 GHz
-15
RF OUTPUT
-20
-40
-30
-20
-10
0
10
-25
0
5
10
15
20
25
30
INPUT POWER (dBm)
FREQUENCY (GHz)
Rise Time @ Fin = 10 GHz @ Pin = 0 dBm Over Temperature [1]
1.8 1.7 1.6 VIDEO OUT (V)
+25C +85C -55C
Fall Time @ Fin = 10 GHz @ Pin = 0 dBm Over Temperature [1]
1.8 1.7 1.6 VIDEO OUT (V) 1.5 1.4 1.3 1.2 1.1 1 0.9
+25C +85C -55C
1.5 1.4 1.3 1.2 1.1 1 0.9 0.8 0 25
50
75 TIME (ns)
100
125
150
0.8
0
25
50
75 TIME (ns)
100
125
150
[1] electrical specs and performance plots are given for single-ended operation
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com
HMC813
SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA) WITH LIMITED RF OUTPUT, 1 - 26 GHz
Absolute Maximum Ratings
Vcc1, Vcc2, Vcc3, Vcc4 eNBL rF Input Power channel temperature continuous Pdiss (t=85c) Derate 12.63 mw/c above 85c thermal resistance (channel to die bottom) +3.6V +3.6V +15 dBm 125 c 0.51 w 79.20 c/w -65 to +150 c -55 to +85 c class 1A v00.1210
Die Packaging Information
standard wP-3 (waffle Pack)
[1]
Alternate [2]
[1] Refer to the "Packaging Information" section for die packaging dimensions. [2] For alternate packaging information contact Hittite Microwave Corporation.
Notes: 1. ALL DIMeNsIoNs IN INcHes [MILLIMeters] 2. DIe tHIcKNess Is 0.011 [0.28] 3. tYPIcAL BoND PAD Is 0.0024 sQUAre 4. BoND PAD MetALLIZAtIoN: ALUMINUM 5. No BAcKsIDe MetAL 6. No coNNectIoN reQUIreD For UNLABeLeD BoND PADs 7. oVerALL DIe sIZe Is .002
5
Power Detectors - cHIP
storage temperature operating temperature esD sensitivity (HBM)
Outline Drawing
eLectrostAtIc seNsItIVe DeVIce oBserVe HANDLING PrecAUtIoNs
5-5
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com
HMC813
SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA) WITH LIMITED RF OUTPUT, 1 - 26 GHz
Pad Descriptions
Pad Number Function Description Interface schematic v00.1210
1 -4, 31
Vcc1
6, 7
Vcc3
Bias supply. connect supply voltage to these pads with appropriate filtering. see application circuit.
8, 9
Vcc4
5
Bias supply. connect supply voltage to this pad with appropriate filtering. see application circuit.
5
Vcc2
10
eN
enable pad, connected to supply voltage for normal operation. total supply current reduced to less than 3mA when eN is set to 0V.
11, 14 - 17, 20 26, 29, 30 Die Bottom
GND
Die bottom must be connected to rF and Dc ground.
12, 13
rFoUt+, rFoUt-
rF output pads. Ac couple rF to rF oUt+, and Ac couple rF oUt- to ground via 50 ohm for single ended operation.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com
5-6
Power Detectors - cHIP
HMC813
SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA) WITH LIMITED RF OUTPUT, 1 - 26 GHz
Pad Descriptions (Continued)
Pad Number Function Description Interface schematic v00.1210
18, 19
VIDeo oUt VIDeo FB
Video out and feedback.
5
Power Detectors - cHIP
rF Input pads. connect rF to rF IN+, and Ac couple rF IN- to ground via 50 ohm for single ended operation.
27, 28
rFIN-, rFIN+
5-7
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com
HMC813
SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA) WITH LIMITED RF OUTPUT, 1 - 26 GHz
Application Circuit
v00.1210
5
Power Detectors - cHIP
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com
5-8
HMC813
SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA) WITH LIMITED RF OUTPUT, 1 - 26 GHz
Assembly Diagram
v00.1210
5
Power Detectors - cHIP
List of Materials for Assembly Diagram
Item c3 - c6 c7 - c10 c1, c2, c11, c12 r1, r2 r3 r4 U1 Description 100 pF sLc capacitor, Presidio sA1212BX101M16VHXF 10 nF sLc capacitor, Presidio MVB3030X103ZGH5N 33 pF capacitor, 0402 Pkg. 50 ohm resistor, 0402 Pkg. 10 ohm resistor, 0402 Pkg. 1k ohm resistor, 0402 Pkg. HMC813 Die
eLectrostAtIc seNsItIVe DeVIce oBserVe HANDLING PrecAUtIoNs
5-9
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com
HMC813
SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA) WITH LIMITED RF OUTPUT, 1 - 26 GHz
Mounting & Bonding Techniques for MMICs
the die should be attached directly to the ground plane with epoxy (see HMc general Handling, Mounting , Bonding Note). 50 ohm Microstrip transmission lines on 0.254mm (10 mil) thick alumina thin film substrates are recommended for bringing rF to and from the chip (Figure 1). Microstrip substrates should be placed as close to the die as possible in order to minimize bond wire length. typical die-to-substrate spacing is 0.076mm to 0.152 mm (3 to 6 mils).
v00.1210
0.279mm (0.011") Thick MMIC
Wire Bond 0.076mm (0.003")
Handling Precautions
Follow these precautions to avoid permanent damage. Storage: All bare die are placed in either waffle or Gel based esD protective containers, and then sealed in an esD protective bag for shipment. once the sealed esD protective bag has been opened, all die should be stored in a dry nitrogen environment. Cleanliness: Handle the chips in a clean environment. Do Not attempt to clean the chip using liquid cleaning systems.
RF Ground Plane
0.254mm (0.010") Thick Alumina Thin Film Substrate Figure 1.
5
Power Detectors - cHIP
5 - 10
Static Sensitivity: Follow esD precautions to protect against esD strikes. HMC813 is a class-1A esD sensitive part. observe handling precautions. Transients: suppress instrument and bias supply transients while bias is applied. Use shielded signal and bias cables to minimize inductive pick-up. General Handling: the chip may be handled by a vacuum collet or with a sharp pair of tweezers.
Mounting
epoxy Die Attach: Apply a minimum amount of epoxy to the mounting surface so that a thin epoxy fillet is observed around the perimeter of the chip once it is placed into position. cure epoxy per the manufacturer's schedule.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com

▲Up To Search▲

Price & Availability of HMC813

	To Download HMC813 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .