![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
HMC893LP5E v00.1210 FILTER - TUNABLE, BAND PASS SMT 4.8 - 9.5 GHz Features Fast Tuning Response; 200 ns Excellent Wideband Rejection; >30 dB Single Chip Replacement for Mechanically Tuned Designs 32 Lead 5x5 mm SMT Package 3 FILTERS - TUNABLE - SMT Typical Applications The HMC892LP5E is ideal for: * Test & Measurement Equipment * Military RADAR & EW/ECM * SATCOM & Space * Industrial & Medical Equipment Functional Diagram General Description The HMC893LP5E is a MMIC band pass filter which features a user selectable passband frequency. The 3 dB filter bandwidth is approximately 6.5%. The 20 dB filter bandwidth is approximately 18%. The center frequency can be varied between 4.8 and 9.5 GHz by applying an analog tune voltage between 0 and 14V. This tunable filter can be used as a much smaller alternative to physically large switched filter banks and cavity tuned filters. The HMC893LP5E has excellent microphonics due to the monolithic design, and provides a dynamically adjustable solution in advanced communications applications. Electrical Specifications, TA = +25C, Vfctl = Vbwctl Unless Otherwise Stated Parameter Fcenter Tuning Range 3 dB Bandwidth Low Side Rejection Frequency (Rejection >20 dB) High Side Rejection Frequency (Rejection >20 dB) Re-entry Frequency (Rejection <30 dB) 3 dB Bandwidth Control (Vbwctl) Insertion Loss Return Loss (2 dB Bandwidth) Maximum Input Power for Linear Operation Frequency Control Voltage (Vfctl) Source/Sink Current (Ifctl) Bandwidth Control Voltage (Vbwctl) Source/Sink Current (Ibwctl) Residual Phase Noise [1] (1 MHz Offset) Fcenter Drift Rate Tuning Characteristics [2] tFULLBAND (0% Vfctl to 90% RF) -163 -0.75 200 0 0 Min. 4.8 6.5 0.9*Fcenter 1.1*Fcenter 2.7*Fcenter 3 10 7 10 14 1 14 1 Typ. Max. 9.5 Units GHz % GHz GHz GHz % dB dB dBm V mA V mA dBc/Hz MHz/C ns [1] Optimum residual phase noise performance requires the use of a low noise driver circuit. [2] Tuning speed is dependent on driver circuit. Data measured with a high speed op-amp driver and includes driver slew rate delay. 3-1 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC893LP5E v00.1210 FILTER - TUNABLE, BAND PASS SMT 4.8 - 9.5 GHz Broadband Insertion Loss vs. Control Voltages, Vfctl = Vbwctl 0 -10 0V 7V 14V Broadband Return Loss vs. Control Voltages, Vfctl = Vbwctl 0 -5 3 FILTERS - TUNABLE - SMT 3-2 INSERTION LOSS (dB) -20 -30 -40 -50 -60 -70 0 5 10 15 RETURN LOSS (dB) -10 S11 S22 -15 0V -20 7V -25 14V -30 20 25 30 FREQUENCY (GHz) 0 5 10 15 20 25 30 FREQUENCY (GHz) Insertion Loss vs. Control Voltages, Vfctl = Vbwctl -4 -6 Return Loss vs. Control Voltages, Vfctl = Vbwctl 0 -5 INSERTION LOSS (dB) RETURN LOSS (dB) -8 -10 -12 -14 -16 -18 -20 4 5 6 0V 7V 14V -10 0V -15 7V 14V -20 S11 S22 -25 -30 7 8 9 10 11 4 5 6 7 8 9 10 11 FREQUENCY (GHz) FREQUENCY (GHz) Insertion Loss vs. Temperature, Vfctl = Vbwctl = 7V -4 -6 Return Loss vs. Temperature, Vfctl = Vbwctl = 7V 0 -5 INSERTION LOSS (dB) -10 -12 -14 -16 -18 -20 4 5 +25C +85C -40C RETURN LOSS (dB) -8 S11 -10 -15 S22 -20 +25C +85C -40C -25 -30 6 7 8 9 10 11 4 5 6 7 8 9 10 11 FREQUENCY (GHz) FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC893LP5E v00.1210 FILTER - TUNABLE, BAND PASS SMT 4.8 - 9.5 GHz 3 FILTERS - TUNABLE - SMT Broadband Insertion Loss vs. Vbwctl, Vfctl = 7V 0 -10 Vbwctl=4V Vbwctl=7V Vbwctl=10V Broadband Return Loss vs. Vbwctl, Vfctl = 7V 0 -5 INSERTION LOSS (dB) RETURN LOSS (dB) -20 -30 -40 -50 -60 -70 -80 0 5 10 15 20 Vbwctl=4V -10 Vbwctl=7V Vbwctl=10V -15 -20 -25 -30 -35 S11 S22 25 30 0 5 10 15 20 25 30 FREQUENCY (GHz) FREQUENCY (GHz) Insertion Loss vs. Vbwctl, Vfctl = 7V -4 -6 Vbwctl=4V Vbwctl=7V Vbwctl=10V Return Loss vs. Vbwctl, Vfctl = 7V 0 -5 INSERTION LOSS (dB) RETURN LOSS (dB) -8 -10 -12 -14 -16 -18 -20 4 5 Vbwctl=4V -10 Vbwctl=7V -15 Vbwctl=10V -20 -25 -30 -35 S11 S22 6 7 8 9 10 11 4 5 6 7 8 9 10 11 FREQUENCY (GHz) FREQUENCY (GHz) Center Frequency vs. Temperature, Vfctl = Vbwctl 11 Insertion Loss vs. Temperature, Vfctl = Vbwctl 0 -2 CENTER FREQUENCY (GHz) 10 9 8 7 6 5 4 0 2 4 6 8 10 12 14 INSERTION LOSS (dB) -4 -6 -8 -10 -12 -14 -16 -18 -20 0 2 4 6 8 10 12 14 +25C +85C -40C +25C +85C -40C Vfctl (V) Vfctl (V) 3-3 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC893LP5E v00.1210 FILTER - TUNABLE, BAND PASS SMT 4.8 - 9.5 GHz 3 dB Bandwidth vs. Temperature, Vfctl = Vbwctl 9 +25C +85C -40C Maximum Return Loss in a 2 dB Bandwidth vs. Temperature, Vfctl = Vbwctl 0 +25C +85C -40C -2 3 FILTERS - TUNABLE - SMT 3-4 8 RETURN LOSS (dB) 12 14 BANDWIDTH (%) -4 7 -6 6 -8 5 -10 4 0 2 4 6 8 10 -12 0 2 4 6 8 10 12 14 Vfctl (V) Vfctl (V) Low Side Rejection Ratio vs. Temperature, Vfctl = Vbwctl [1] 0.95 High Side Rejection Ratio vs. Temperature, Vfctl = Vbwctl [1] 1.15 F20dB TO Fcenter RATIO F20dB To Fcenter RATIO 0.93 1.13 0.91 1.11 0.89 +25C +85C -40C 1.09 0.87 1.07 +25C +85C -40C 0.85 0 2 4 6 8 10 12 14 1.05 0 2 4 6 8 10 12 14 Vfctl (V) Vfctl (V) Tuning Sensitivity vs. Temperature, Vfctl = Vbwctl 700 600 Group Delay 2 0V GROUP DELAY (ns) 1.5 7V 14V SENSITIVITY (MHz/V) 500 400 300 200 100 0 0 2 4 6 8 10 12 14 1 +25C +85C -40C 0.5 0 3.5 4.5 5.5 Vfctl (V) 6.5 7.5 8.5 FREQUENCY (GHz) 9.5 10.5 11.5 [1] Rejection ratio is defined as the ratio of the frequency at which the relative insertion loss is 20 dB to center For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC893LP5E v00.1210 FILTER - TUNABLE, BAND PASS SMT 4.8 - 9.5 GHz 3 FILTERS - TUNABLE - SMT Group Delay vs. Fcenter vs. Temperature 2 1.9 + 25C + 85C - 40C 3 dB Bandwidth vs. Bandwidth Control 12 10 GROUP DELAY (nS) BANDWIDTH (%) 1.8 1.7 1.6 1.5 1.4 1.3 1.2 0 2 4 6 8 6 4 Vbwctl=Vfctl Vbwctl=Vfctl+3v Vbwctl=Vfctl-3v 2 0 8 10 12 14 0 2 4 6 8 10 12 14 Vfctl (V) Vfctl (V) Insertion Loss vs. Bandwidth Control 0 Low Side Rejection Ratio vs. Bandwidth Control [1] 1 INSERTION LOSS (dB) -5 F20dB TO Fcenter RATIO 0.95 -10 0.9 -15 Vbwctl=Vfctl Vbwctl=Vfctl+3v Vbwctl=Vfctl-3v -20 0.85 Vbwctl=Vfctl Vbwctl=Vfctl +3v Vbwctl=Vfctl -3v -25 0 2 4 6 8 10 12 14 0.8 0 2 4 6 8 10 12 14 Vfctl (V) Vfctl (V) High Side Rejection Ratio vs. Bandwidth Control [1] 1.25 Maximum Return Loss in a 2 dB Bandwidth vs. Bandwidth Control 0 Vbwctl=Vfctl Vbwctl=Vfctl+3v Vbwctl=Vfctl-3v F20dB TO Fcenter RATIO 1.2 RETURN LOSS (dB) 14 Vbwctl=Vfctl Vbwctl=Vfctl+3v Vbwctl=Vfctl-3v -2 1.15 -4 1.1 -6 1.05 -8 1 0 2 4 6 8 10 12 -10 0 2 4 6 8 10 12 14 Vfctl (V) Vfctl (V) [1] Rejection ratio is defined as the ratio of the frequency at which the relative insertion loss is 20 dB to center 3-5 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC893LP5E v00.1210 FILTER - TUNABLE, BAND PASS SMT 4.8 - 9.5 GHz Input IP3 vs. Power Input Vfctl = Vbwctl 35 Residual Phase Noise Vfctl = Vbwctl -120 3 0V 7V 13V 30 -130 IP3 (dBm) 25 -140 20 15 Pin = 0 dBm Pin = 5 dBm Pin = 10 dBm Pin = 15 dBm Pin = 20 dBm -150 -160 10 4.6 5.1 5.6 6.1 6.6 7.1 7.6 8.1 8.6 9.1 9.6 10.1 -170 1.0e+2 1.0e+3 1.0e+4 1.0e+5 1.0e+6 1.0e+7 FREQUENCY (GHz) OFFSET FREQUENCY (Hz) Absolute Maximum Ratings Frequency Control Voltage (Vfctl) Bandwidth Control Voltage (Vbwctl) RF Power Input Storage Temperature ESD Rating (HBM) -0.5 to +15V -0.5 to +15V 26 dBm -65 to +150 C Class 1B Reliability Information Junction Temperature to Maintain 1 Million Hour MTTF Nominal Junction Temperature (T= 85 C and Pin = 10 dBm) Operating Temperature 150 C 90 C -40 to +85 C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 3-6 FILTERS - TUNABLE - SMT RESIDUAL PHASE NOISE (dBc/Hz) HMC893LP5E v00.1210 FILTER - TUNABLE, BAND PASS SMT 4.8 - 9.5 GHz 3 FILTERS - TUNABLE - SMT Outline Drawing Package Information Part Number HMC893LP5E Package Body Material NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 4. Pin BURR LENGTH SHALL BE 0.15mm MAXIMUM. Pin BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. Lead Finish 100% matte Sn MSL Rating MSL1 [2] Package Marking [1] H893 XXXX RoHS-compliant Low Stress Injection Molded Plastic [1] 4-Digit lot number XXXX [2] Max peak reflow temperature of 260 C 3-7 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC893LP5E v00.1210 FILTER - TUNABLE, BAND PASS SMT 4.8 - 9.5 GHz Pin Descriptions Pin Number 1 - 4, 7 - 11, 13 15 - 18, 21 - 32 5, 20 Function N/C Description The pins are not connected internally; however, all data shown herein was measured with these pins connected to RF/DC ground externally. These pins and exposed paddle must be connected to RF/DC ground. Interface Schematic 3 GND 6 RFIN This pin is DC coupled and matched to 50 Ohms. External voltage must not be applied to this pin. 12 Vfctl Center frequency control voltage. 14 Vbwctl Bandwidth control voltage. 19 RFOUT This pin is DC coupled and matched to 50 Ohms. External voltage must not be applied to this pin. Application Circuit For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 3-8 FILTERS - TUNABLE - SMT HMC893LP5E v00.1210 FILTER - TUNABLE, BAND PASS SMT 4.8 - 9.5 GHz 3 FILTERS - TUNABLE - SMT Evaluation PCB List of Materials for Evaluation PCB 128531 [1] Item J1, J2 J3, J4 C1, C2 U1 PCB [2] Description SMA - SRI SMA - Johnson 100 pF Capacitor, 0402 Pkg. HMC893LP5E Filter - Tunable 127338 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Arlon 25FR or Rogers 25FR The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohms impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. 3-9 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC893LP5E v00.1210 FILTER - TUNABLE, BAND PASS SMT 4.8 - 9.5 GHz Notes: 3 FILTERS - TUNABLE - SMT For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 3 - 10 |
Price & Availability of HMC893LP5E
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |