![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
AH315 3.3-3.8 GHz WiMAX 2W Driver Amplifier Product Features * 3.3 - 3.8 GHz * 25 dB Gain * EVM <2.5 %@ 25 dBm Pout * Internal Active Bias * +5V Single Supply Voltage * +33 dBm P1dB * RoHS-compliant/Lead-free 5x5 mm QFN SMT package Product Description The AH315 is a high dynamic range broadband driver amplifier in a surface mount package. The two-stage amplifier has 25 dB of gain, while being able to achieve high performance for 3.3-3.8 GHz WiMAX/WiBro applications delivering +25 dBm of linear output power. AH315 uses a high reliability +5V InGaP/GaAs HBT process technology. The device incorporates proprietary bias circuitry to compensate for variations in linearity and current draw over temperature. The device does not require any negative bias voltage; an internal active bias allows the AH315 to operate directly off a commonly used single +5V supply. The RoHS-compliant/Lead-free/Green 5x5mm QFN package is surface mountable to allow for low manufacturing costs to the end user. The AH315 is targeted for use in a configuration for the stage amplifier in 802.16 WiMAX basestations where high linearity and medium power is required. Functional Diagram GND / NC GND / NC VBias2 Vcc1 Vpd2 Vpd1 VBias1 GND / NC RF IN RF IN Vcc2 GND / NC RF OUT RF OUT RF OUT GND / NC GND / NC GND / NC Applications * 802.16 WiMAX infrastructure Specifications (1) Parameter Operational Bandwidth Output Channel Power Power Gain EVM(2) Efficiency Output P1dB Noise Figure Quiescent Current, Icq(3) Icc @26dBm Device Voltage, Vcc Typical Performance (4) Units Min GHz dBm dB % % dBm dB mA mA V 3.3 +25 25 2.3 8 +33 7.3 600 700 +5 Typ Max 3.8 Parameter Frequency Output Channel Power Power Gain S11 - Input R.L. S22 - Output R.L. Output P1dB EVM Efficiency Noise Figure Quiescent Current Vpd, Vbias Units GHz dBm dB dB dB dBm % % dB mA V Vcc=5V 3.5 +25 25.4 -15.2 -11.3 33 2.2 8 7.3 600 +5 GND / NC GND / NC Vcc=6V 3.5 +26 24.5 -15.7 -11.7 33 1.6 9.4 7.3 650 +5 2.5 1. Test conditions unless otherwise noted: 25C, +5V Vsupply, in 3.4-3.6 GHz tuned application circuit shown in page 3. 2. Using an 802.16-2004 OFDMA, 64QAM-1/2,1024-FFT, 20 symbols, 30 subchannels. 3. This corresponds to the quiescent current or operating current under small-signal conditions with bias resistor R1=70 off pin 1 and R2=150 off pin 16. 4. Typical parameters reflect performance in a tuned application circuit at +25 C. Absolute Maximum Rating Parameter Storage Temperature Thermal Resistance, Rth Junction Temperature, Tj Collector Current, Icc ( Icc1+Icc2) RF Input Power into a 50 Load Device Voltage Device Power Rating -55 to +125 C 13 C / W 150 C 1.6 A 19 dBm +8 V 8W Ordering Information Part No. AH315 AH315 -PCB Description 3.3-3.8 GHz WiMAX 2W Driver Amplifier 3.4-3.6 GHz Evaluation Board Specifications and information are subject to change without notice. Operation of this device above any of these parameters may cause permanent damage. Standard T/R size = 500 pieces on a 7" reel. WJ Communications, Inc * Phone 1-800-WJ1-4401 * FAX: 408-577-6621 * e-mail: sales@wj.com * Web site: www.wj.com Page 1 of 5 December 2007 AH315 3.3-3.8 GHz WiMAX 2W Driver Amplifier Typical Device Data S-Parameters (VCC = +5 V, ICC = 600 mA, T = 25 C, calibrated to device leads) 1.0 0. DB(|S(2,1)|) 0. 4 2. 0 0. 30 25 20 15 0 6 6 Swp Max 5GHz 1.0 0.8 0.8 Gain S11 S22 Swp Max 5GHz 2. 0 0 3. 4. 0 5.0 0.2 0.2 Gain (dB) 10 .0 10.0 10 -4 .0 -5. 0 -4 .0 -5. 0 10.0 0.2 0.4 0.6 0.8 1.0 2.0 3.0 4.0 5.0 0.2 0.4 0.6 0.8 1.0 2.0 3.0 4.0 5.0 0 5 0 0 1 2 3 4 5 -0. 2 -0. 2 -0 .4 -0 .4 0 .6 -0 -0 .8 S(1,1) Swp Min 0.5GHz -0 .8 -1.0 S(2,2) Notes: The gain for the unmatched device in 50ohm system is shown as the trace in blue color. The impedance plots are shown from 0 - 5000 MHz, with markers placed at 0.5-5GHz in 0.5GHz increments. S-Parameters (VCC = +5 V, ICC = 600 mA, T = 25 C, unmatched 50 ohm system, calibrated to device leads) Freq ( MHz ) S11(dB) S11(ang) S21(dB) S21(ang) S12(dB) S12(ang) S22(dB) 3200 -7.15 -47.75 24.62 -121.57 -46.71 81.59 -4.82 3250 -8.30 -67.91 25.04 -142.33 -45.76 65.79 -4.33 3300 -9.03 -85.52 25.23 -161.71 -45.35 52.08 -4.13 3350 -10.02 -100.73 25.25 179.97 -45.27 38.15 -4.18 3400 -10.60 -114.25 25.16 163.19 -45.49 25.90 -4.38 3450 -11.13 -121.9 25.05 147.33 -45.94 14.60 -4.68 3500 -11.83 -128.99 24.95 132.15 -46.35 3.68 -5.00 3550 -12.06 -133.37 24.84 117.52 -46.84 -6.51 -5.32 3600 -12.42 -133.94 24.79 103.11 -47.68 -18.83 -5.62 3650 -12.56 -134.22 24.71 89.24 -48.26 -29.21 -5.84 3700 -12.37 -132.5 24.67 75.18 -49.27 -43.37 -6.05 3750 -11.85 -131.84 24.70 61.44 -50.2 -58.07 -6.24 3800 -10.99 -131.88 24.73 47.15 -51.31 -77.27 -6.49 3850 -10.10 -134.27 24.90 32.58 -51.77 -99.53 -6.82 3900 -9.19 -139.24 25.02 17.14 -52.57 -125.81 -7.38 3950 -8.41 -146.73 25.29 0.702 -51.90 -156.29 -8.19 4000 -7.90 -157.43 25.43 -17.44 -50.26 173.75 -9.28 Device S-parameters are available for download off of the website at: http://www.wj.com S22(ang) 65.17 64.24 63.23 62.35 62.37 63.12 64.61 66.87 69.29 72.04 74.47 76.46 77.95 78.63 79.17 80.03 83.45 Application Circuit PC Board Layout RF IN -1.0 Frequency (GHz) -0 .6 .0 -2 . -2 Swp Min 0.5GHz RF OUT PCB Material: 0.0147" Rogers Ultralam 2000, single layer, 1 oz Cu, r = 2.45 Microstrip line details: width = .042", spacing = .050" The silkscreen markers `A', `B', `C', etc. and `1', `2', `3', etc. are used as place markers for the input and output tuning. Specifications and information are subject to change without notice. WJ Communications, Inc * Phone 1-800-WJ1-4401 * FAX: 408-577-6621 * e-mail: sales@wj.com * Web site: www.wj.com Page 2 of 5 December 2007 -10.0 -3 .0 0. 4 0 3. 4. 0 5.0 10 .0 -10.0 -3 .0 AH315 3.3-3.8 GHz WiMAX 2W Driver Amplifier Application Circuit Schematic (AH315-PCB) for 3.4-3.6 GHz. (The Amplifier can be tuned across any 200MHz band over the 3.3-3.8 GHz BW.) 68 Specifications and information are subject to change without notice. WJ Communications, Inc * Phone 1-800-WJ1-4401 * FAX: 408-577-6621 * e-mail: sales@wj.com * Web site: www.wj.com Page 3 of 5 December 2007 AH315 3.3-3.8 GHz WiMAX 2W Driver Amplifier Typical Performance Plots for AH315-PCB, Vcc = 5V Gain 27 Gain Return Loss 0 S11 S22 EVM vs Pout vs Temperature (Freq = 3.5 GHz, Vcc=5V) 5 4 OFDM, QAM-64,54Mb/S +25C -40C +85C 26 S11 & S22 (dB) -5 Gain(dB) EVM (%) 25 3 2 1 0 -10 24 -15 23 3.3 3.4 3.5 3.6 3.7 3.8 -20 3.3 3.4 3.5 3.6 3.7 3.8 3.9 14 16 18 20 22 24 26 Frequency (GHz) EVM vs Pout vs Frequency (+25 Vcc=5V) C, 5 4 OFDM, QAM-64,54Mb/S 3.4 GHz 3.5 GHz 3.6 GHz 28 27 Frequency (GHz) Gain vs Pout vs Temperature (Freq = 3.5 GHz, Vcc=5V) 27 Pout (dBm) Gain vs Pout vs Frequency ( +25 Vcc=5V ) C, Gain (dB) 3 2 1 0 14 16 18 20 22 24 26 25 24 23 22 22 24 26 28 30 32 34 -40C +25C +85C OFDM, QAM-64,54Mb/S Gain (dB) EVM (%) 26 26 25 24 3.4 GHz 23 3.5GHz 3.6 GHz OFDM, QAM-64,54Mb/S 22 24 26 14 16 18 20 Pout (dBm) Pout (dBm) Pout (dBm) Current vs Pout vs Temperature ( Freq = 3.5 GHz, Vcc=5V ) 1000 900 1000 900 Current vs Pout vs Frequency ( +25 Vcc=6V ) C, OFDM, QAM-64,54Mb/S 3.4 GHz 3.5 GHz OFDM, QAM-64,54Mb/S +25C -40C +85C 3.6 GHz Current (mA) 800 700 600 500 20 22 24 26 28 30 Current (mA) 800 700 600 500 18 20 22 24 26 28 Pout (dBm) Pout (dBm) Typical Performance Plots for AH315-PCB, Vcc = 6V EVM vs Pout vs Frequency (+25 Vcc=6V) C, 5 OFDM, QAM-64,54Mb/S 4 3.4 GHz 3.5 GHz 3.6 GHz Gain 27 Gain 900 1000 Current vs Pout vs Frequency ( +25 Vcc=6V ) C, OFDM, QAM-64,54Mb/S 3.4 GHz 3.5 GHz 26 3.6 GHz EVM (%) 3 2 1 0 18 20 22 24 26 28 Current (mA) 3.4 3.5 3.6 3.7 3.8 Gain(dB) 25 800 700 600 24 23 3.3 500 18 20 22 24 26 28 Pout (dBm) Frequency (GHz) Pout (dBm) Specifications and information are subject to change without notice. WJ Communications, Inc * Phone 1-800-WJ1-4401 * FAX: 408-577-6621 * e-mail: sales@wj.com * Web site: www.wj.com Page 4 of 5 December 2007 AH315 3.3-3.8 GHz WiMAX 2W Driver Amplifier Mechanical Information This package is lead-free/Green/RoHS-compliant. The plating material on the pins is annealed matte tin over copper. It is compatible with both lead-free (maximum 260 C reflow temperature) and leaded (maximum 245 C reflow temperature) soldering processes Outline Drawing Product Marking The component will be marked with an "AH315-G" designator with an alphanumeric lot code on the top surface of the package. AH315-G XXXX Tape and reel specifications for this part are located on the website in the "Application Notes" section. ESD / MSL Information ESD Rating: Value: Test: Standard: ESD Rating: Value: Test: Standard: TBD TBD Human Body Model (HBM) JEDEC Standard JESD22-A114 TBD TBD Charged Device Model (CDM) JEDEC Standard JESD22-C101 Level 2 at +260 C convection reflow JEDEC Standard J-STD-020 Mounting Configuration / Land Pattern MSL Rating: Standard: Functional Pin Layout GND / NC GND / NC VBias2 Vcc1 Vpd2 Vpd1 VBias1 GND / NC RF IN RF IN Vcc2 GND / NC RF OUT RF OUT RF OUT GND / NC GND / NC GND / NC GND / NC Function Vcc1 Vcc2 Vpd1 Vpd2 Input Output Vbias1 Vbias2 GND N/C or GND Pin No. 19 15 1 16 4,5 11,12,13 2 17 Backside Paddle 3,6,7,8,9,10,14,18,20 Specifications and information are subject to change without notice. WJ Communications, Inc * Phone 1-800-WJ1-4401 * FAX: 408-577-6621 * e-mail: sales@wj.com * Web site: www.wj.com Page 5 of 5 December 2007 GND / NC |
Price & Availability of AH315-PCB
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |