View PDR3G1_5046896.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PDR3G
3A GLASS PASSIVATED RECTIFIER
PowerDI a5
Features
* * * * * *
Glass Passivated Die Construction Low Leakage Current High Forward Surge Current Capability Lead Free Finish, RoHS Compliant (Note 1) "Green" Molding Compound (No Br, Sb) Qualified to AEC-Q101 Standards for High Reliability
L1 e
E
D b2 L1
A A2
PowerDIa5 Dim
E1
Min 1.05 0.33 0.80 1.70 3.90 6.40 5.30 0.75 0.50 1.20
Max 1.15 0.43 0.99 1.88 4.05 6.60 5.45 0.95 0.65 1.50
A A2 b1
Mechanical Data
* * * * * * *
Case: PowerDIa5 Case Material: Molded Plastic, "Green" Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Finish - Matte Tin annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 Polarity: See Diagram Marking: See Page 3 Weight: 0.095 grams (approximate)
b1 D D2 b2
b1
A2
b2 D D2
3.05 NOM 1.84 NOM 3.55 NOM
L E2 E
E e E1 E2 L L1
BOTTOMSIDE HEAT SINK
e3
W
L1 e
b1
LEFT PIN RIGHT PIN
b1
W
All Dimensions in mm
Note: Pins Left & Right must be electrically connected at the printed circuit board.
Maximum Ratings
@ TA = 25C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (See also figure 4) Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load Symbol VRRM VRWM VR VR(RMS) IO IFSM Value 400 283 3 100 Unit V V A A
Thermal Characteristics
Characteristic Thermal Resistance Junction to Soldering Point Thermal Resistance Junction to Ambient Air (Note 2) Thermal Resistance Junction to Ambient Air (Note 3) Thermal Resistance Junction to Ambient Air (Note 4) Operating Temperature Range Storage Temperature Range
Notes: 1. 2. 3. 4.
Symbol RqJS RqJA RqJA RqJA Tj TSTG
Typ 3/4 75 65 45 -65 to +150 -65 to +150
Max 2.0 3/4 3/4 3/4
Unit C/W C/W C/W C/W C C
RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. TA = 25C Polymide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. TA = 25C Polymide PCB, 2 oz. Copper. Cathode pad dimensions 9.4mm x 7.2mm. Anode pad dimensions 2.7mm x 1.6mm. TA = 25C
DS30547 Rev. 7 - 2
PowerDI is a trademark of Diodes Incorporated.
1 of 3 www.diodes.com
PDR3G
a Diodes Incorporated
Electrical Characteristics
Characteristic Reverse Breakdown Voltage (Note 5) Forward Voltage Reverse Leakage Current (Note 5) Reverse Recovery Time
Notes:
@ TA = 25C unless otherwise specified Symbol V(BR)R VF IR trr Min 400 3/4 3/4 3/4 3/4 Typ 3/4 0.92 0.015 6 3.0 Max 3/4 1.15 10 250 3/4 Unit V V mA ms Test Condition IR = 10mA IF = 3A, TS = 25C TS = 25C, VR = 400V TS = 125C, VR = 400V IF = 0.5A, IR = 1.0A, Irr = 0.25A
5. Short duration test pulse used to minimize self-heating effect.
IF, INSTANTANEOUS FORWARD CURRENT (A)
100 10 1
Tj = 150C
IR, INSTANTANEOUS REVERSE CURRENT (A)
Tj = +150C
Tj = +125C
100m 10m 1m
Tj = 85C
Tj = +85C
100n
Tj = +25C
Tj = 25C
10n
Tj = -65C
Tj = -65C
1n 0 80 160 240
0
0.2
0.4
0.6
0.8
1.0
1.2
320
400
VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 1 Typical Forward Characteristics
VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 2 Typical Reverse Characteristics
3.75
40
f = 1 MHz
IF, DC FORWARD CURRENT (A)
CT, TOTAL CAPACITANCE (pF)
30
3.0
2.25
Note 4
20
1.5
Note 2
10
0.75
0 0 5 10 15 20 25 30
0 0 25 50 75 100 125 150 TA, AMBIENT TEMPERATURE (C) Fig. 4 DC Forward Current Derating
VR, REVERSE VOLTAGE (V) Fig. 3 Typical Total Capacitance vs. Reverse Voltage
DS30547 Rev. 7 - 2
PowerDI is a trademark of Diodes Incorporated.
2 of 3 www.diodes.com
PDR3G
4
IPK = 1 (DC) IAV
180 TA, DERATED AMBIENT TEMPERATURE (C)
PF, FORWARD POWER DISSIPATION (W)
150
3
120
2
90
60
1
30
0 0 1 2 3 4 5 IF, FORWARD CURRENT (A) Fig. 5 Forward Power Dissipation
0 0 100 200 300 400 VR, DC REVERSE VOLTAGE (V) Fig. 6 Operating Temperature Derating
Ordering Information
Device PDR3G-13
Notes:
(Note 6) Packaging PowerDIa5 Shipping 5000/Tape & Reel
6. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf.
Marking Information
R3G YYWWK
R3G = Product type marking code = Manufacturers' code marking YYWW = Date code marking YY = Last two digits of year ex: 05 for 2005 WW = Week code 01 to 52 K = Factory Designator
IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated.
DS30547 Rev. 7 - 2
PowerDI is a trademark of Diodes Incorporated.
3 of 3 www.diodes.com
PDR3G

▲Up To Search▲

Price & Availability of PDR3G1

	To Download PDR3G1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .