|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Full Color PLCC6 LED OVSTRGBBCR8 x x x x x Full-color red/green/blue PLCC package with 6 pins Wide viewing angle High performance Tuneable color mix Product Photo Here The OVSTRGBBCR8 package design provides wide viewing angle, low power consumption, and high luminous intensity. Color on demand is made possible by isolated chip circuits, allowing each LED to be driven individually or in tunable color combinations. Applications x Amusement equipment x Information boards x Automotive interior lighting x Portable appliances Part Number Type R G B x x x x Material AlInGaP InGaN InGaN Indoor and outdoor displays Backlighting Camera flash RGB full-color displays Chip Emitted Color Red Green Blue Lens Color Water Clear OVSTRGBBCR8 Intensity Typ. mcd 1000 900 280 RoHS Moisture DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 10/05 Page 1 of 7 Full Color PLCC6 LED OVSTRGBBCR8 Absolute Maximum Ratings TA = 25o C unless otherwise noted PARAMETER Storage Temperature Operating Temperature Reverse Voltage Continuous Forward Current Power Dissipation Junction Temperature Junction/ambient (1 chip on ) Junction/ambient (3 chips on ) Junction/solder point (1 chip on) Junction/solder point (3 chips on) Notes: 1. Single color light 2. Rth test condition: Mounted on PC Board FR 4 (pad size 2 2 1 RATING R G -40 ~ +100 -40 ~ +100 5 80 200 260 110 250 500 150 150 80 100 410 110 210 300 130 160 80 100 410 110 210 300 130 160 B UNIT C C V mA mA mW C C/W C/W C/W C/W Peak Forward Current (10% Duty Cycle, PW sec) Electrical Characteristics TA = 25o C unless otherwise noted SYMBOL PARAMETER Min Avg Avg Max VALUES R 710 1000 2.5 3.2 10 624 620 120 24 G 710 900 4.5 5.1 10 525 521 120 38 B 180 280 4.5 5.1 10 470 468 120 28 UNIT CONDITIONS IV Luminous Intensity VF IR D P Forward Voltage Reverse Current (max) Dominant Wavelength Wavelength at Peak Emission 50% Power Angle Spectrum Radiation Bandwidth 2 1/2 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 10/05 Page 2 of 7 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com | 2 ) mcd IF = 50 mA V A nm nm deg nm IF = 50 mA VR = 5 V IF = 50 mA IF = 50 mA IF = 50 mA IF = 50 mA Full Color PLCC6 LED OVSTRGBBCR8 Standard Bins (IF = 50 mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength ( D ) bins shown. Orders for OVSTRGBBCR8 may be filled with any or all bins contained as below. RED Luminous Intensity (mcd) 1800 1120 710 612 W V Luminous intensity is at V bin or above. Dominant Wavelength (nm) 625 GREEN Luminous Intensity (mcd) 1800 1120 710 514 W V Luminous intensity is at V bin or above. Dominant Wavelength (nm) 534 BLUE Luminous Intensity (mcd) 450 280 180 460 T S Luminous intensity is at S bin or above. Dominant Wavelength (nm) 480 Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. Tolerance of measurement of luminous intensity is 10%. 3. Tolerance of measurement of dominant wavelength is 1nm. 4. Tolerance of measurement of VF is 0.05V. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 10/05 Page 3 of 7 OVSTRGBBCR8 Full Color PLCC6 LED Typical Electro-Optical Characteristics Curves nm Relative Intensity vs Dominant Wavelength mA mA V V Forward Current vs Forward Voltage % % mA mA Relative Luminous Intensity vs Forward Current OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 10/05 Page 4 of 7 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Full Color PLCC6 LED OVSTRGBBCR8 Typical Electro-Optical Characteristics Curves mA mA C C Maximum Forward DC Current vs Solder Point Temperature 1 Chip On 3 Chips On mA mA C C Maximum Forward DC Current vs Ambient Temperature 50% Power Angle: 120 Far Field Pattern OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 10/05 Page 5 of 7 Full Color PLCC6 LED OVSTRGBBCR8 CIE Chromaticity Diagram Note: 1. The color coordinates of the mixed light can be expected within the area of the color triangle marked a). The achromatic point (x=0.33, y=0.33) is marked "+". OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 10/05 Page 6 of 7 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Full Color PLCC6 LED OVSTRGBBCR8 Reel Dimensions: 13-inch reel 18.4 MAX 12. Carrier Tape Dimensions: Loaded quantity 2000 pieces per reel Notes: 1. 10 sprocket hole pitch cumulative tolerance 0.20 mm. 2. Carrier camber not to exceed 1mm in 100 mm. 3. A0 and B0 measured on a plane 0.3 mm above the bottom of the pocket. 4. K0 measured from a p lane on the inside bottom of the pocket to the top surface of the carrier. 5. All dimensions meet EIA-481-2A requirements. 6. Material: Black Anti-static Polystyrene. 7. Thickness: 0.3050.02 mm. Moisture Resistant Packaging Label Aluminum Moisture-proof Bag Desiccant Bar Code Label OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 10/05 Page 7 of 7 |
Price & Availability of OVSTRGBBCR8 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |