View PU150-10_28708.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

International Power Sources, Inc. NEW * AUTO-RANGING INPUT
150 WATT
SWITCHING POWER SUPPLY
DESCRIPTION
The PU150 Series is comprised of single and multiple output models for 150 watts of continuous output power. Auto ranging input allows them to operate from any line voltage throughout the world without a selector strap. All models meet CISPR 22 and FCC Class B emission limits, and comply with UL, CSA, IEC safety and have the CE Mark to satisfy international requirements.
FEATURES
Built-in EMI filter Overvoltage protection * Short-circuit protection with auto-recovery * Power fail detection 100% burn-in at full rated load
*
*
* Auto-ranging universal input
*
OUTPUT VOLTAGE/CURRENT RATINGS CHART
Output #1 Models PU150-10 PU150-12 PU150-13 PU150-13-1 PU150-14 PU150-16 PU150-17 PU150-18 PU150-23 PU150-24 PU150-25 PU150-30 PU150-31 PU150-32 PU150-33 PU150-40 PU150-41 PU150-42 PU150-44 PU150-45
NOTE: (1) (2) (3) (4) (5)
Output #2 Tol. 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% Vnom Imin Imax N/A N/A N/A N/A N/A N/A N/A N/A +12V 0A 8A +15V 0A 6.4A +24V 0A 4.5A +12V 0A 8A +12V 0A 8A +15V 0A 6.4A +15V 0A 6.4A +12V 0A 8A +15V 0A 6.4A +12V 0A 8A +12V 0A 8A +12V 0A 8A
Output #3
Output #4 Tol. Vnom Imin Imax N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 3% N/A 3% N/A 3% N/A 3% N/A 3% F 5V 0A 5.0A 3% F24V 0A 4.5A 3% F12V 0A 4.5A 3% F15V 0A 4.5A 3% F24V 0A 4.5A Ipeak Tol.
Vnom 5V 12V 15V 18V 24V 30V 36V 48V +5V +5V +5V +5V +5V +5V +5V +5V +5V +5V +5V +5V
Imin Imax 0A 30A 0A 12.5A 0A 10A 0A 8.3A 0A 6.3A 0A 5.0A 0A 4.2A 0A 3.1A 2.0A 22A 2.0A 22A 2.0A 22A 2.0A 22A 2.0A 22A 2.0A 22A 2.0A 22A 2.0A 22A 2.0A 22A 2.0A 22A 2.0A 22A 2.0A 22A
Ipeak 35A 14.5A 11.6A 9.7A 7.3A 6.0A 4.8A 3.6A 30A 30A 30A 30A 30A 30A 30A 30A 30A 30A 30A 30A
Ipeak Tol. Vnom Imin Imax N/A N/A N/A N/A N/A N/A N/A N/A 10A 3% N/A 8A 3% N/A 5A 3% N/A 10A 3% -5V 0A 2.5A 10A 3% -12V 0A 2.5A 8A 3% -15V 0A 2A 8A 3% -12V 0A 2.5A 10A 3% -12V 0A 2.5A 8A 3% -15V 0A 2A 10A 3% -12V 0A 2.5A 10A 3% -15V 0A 2A 10A 3% -12V 0A 2.5A
5A 3% 5A 3% 5A 3% 5A 3% 5A 3%
Add suffix "B" for U-bracket. Output #4 is floating. It can be connected externally for positive or negative output. All models, maximum power is derated to 110W with no forced air provided by user. All multi-output models, maximum current per output is derated to 75% with no forced air provided by user. Total output power: 110W convection, 150W with 30 cfm forced air. For covered version, 75W convection, 130W with 30cfm of forced air.
74
GENERAL SPECIFICATIONS
All specifications are typical at nominal line, full load, and 25C.
INPUT SPECIFICATIONS
Efficiency: Hold-up time: Line regulation: Inrush current: Withstand voltage: Operating temperature: Storage temperature: Relative humidity: MTBF: EMI requirements: Safety requirements:
Switching frequency:
Input voltage: 85 to 132 VAC, 170 to 264 VAC Input frequency: 47 to 63 Hz 70% typical on all models Input current: 3.4A (rms) for 115 VAC 15 msec minimum at 115VAC 2.0A (rms) for 230 VAC 0.5% maximum at full load Leakage current: 0.4mA max at 110VAC 60 hz 20 amps @115VAC or 0.8mA max at 240VAC 50 hz 40 amps @230VAC at 25C cold start 3000 VAC from input to output OUTPUT SPECIFICATIONS 1500 VAC from input to ground Output voltage: See Rating Chart 500 VAC from output to ground Output current: See Rating Chart 0 to +70C* Ripple and noise: 1% peak to peak maximum -40 to +85C Overvoltage protection: Set at 112-132% of maximum 5% to 95% non-condensing output voltage (on output #1 only) 100,000 hours at full load at 25C ambient Overcurrent protection: All outputs protected to short Meets conduction limits of CISPR 22 circuit conditions Class B and FCC Class B Temperature coefficient: 0.04%/C maximum Approved to: Transient response: Maximum excursion of 4% or a) UL1950 better on all models, recovering to b) CSA C22.2 No. 234 1% of final value 500us after a c) IEC 950 (EN60950) 25% step load change. 100 kHz - 130 kHz * Derate linearly from 100% load at 50C to 50% load at 70C
MECHANICAL SPECIFICATIONS
NOTES: 1. Dimensions shown in inches (mm). 2. Tolerance 0.02 (0.5) maximum. 3. Input connector P1 mates with Molex housing 09-50-3051 and Moles 2878 series crimp terminal. 4. Output connector P3 mates with Molex housing 09-50-3031 or 09-50-3091 for multiple outputs and Molex 2878 series crimp terminal. 5. Connector P4 mates with Molex housing 51110-0851 and pins 50394-8100 6. Weight: 0.84 Kgs (1.86 Lbs) approx. for "B" version
PIN CHART
PIN
1 P1 2 P2 3 1 2 1 P3 2
N.C.
P4 3 1 2 3 4 5 6 7 8
Model
PU150-10 PU150-12 PU150-13-1 PU150-16 PU150-18
AC AC AC Return Output Return Neutral Line Ground +V PU150-13 PU150-14 AC AC AC Return Output Return PU150-17 Neutral Line Ground +V
PFD Inhibit Inhibit N.C. -Ve +Ve N.C. Inhibit Inhibit N.C. -Ve +Ve
N.C. Return -Sense +Sense Current Share N.C. Return -Sense +Sense Current Share
N.C.
Model
PU150-23 PU150-25 PU150-30 PU150-32 PU150-40 PU150-42 PU150-45
PIN
PU150-24
1
P1 2
P2 3 1 2 1,2 3,4,5 6
N.C.
P3 7
PFD PFD
8
N.C. N.C.
9
1
2
3
4
P4 5
6
7
8
AC AC AC Comm Output Output Comm Neutral Line Ground Return #1 #2 Return
N.C. Inhibit Inhibit -Ve +Ve N.C. Inhibit Inhibit -Ve +Ve
Fan* N.C. Comm -Sense +Sense Current Rtn Share Fan* Fan* N.C. Comm -Sense +Sense Current Rtn Share N.C. Comm -Sense +Sense Current Rtn Share
PU150-31 AC AC AC PU150-33 Neutral Line Ground PU150-41 AC AC AC PU150-44 Neutral Line Ground
Comm Output Output Comm Output Return #1 #2 Return #3 Comm Output Output Comm Output Return #1 #2 Return #3
PFD Output Output Inhibit Inhibit #4 #4 Rtn -Ve +Ve
* Fan Voltage is equal to output #2 voltage (ex. PU150-23 has +12V fan)
Your Source of Power ...
International Power Sources, Inc.
75
260 Hopping Brook Road, Holliston, MA 01746 TEL: (508) 429-4440 FAX: (800) 226-2100 http://www.intlpower.com

▲Up To Search▲

Price & Availability of PU150-10

	To Download PU150-10 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .