|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
High-Performance Surface-Mount TTL Delay Lines n Five equal taps in 20% increments of total delay. n Lumped constant, active series. www..com n Transfer-molded packaging for highest reliability. n Designed for leading edge timing. Trailing edge CTTLDL, BJTTLDL, GBTTLDL, BTTLDL n Military models with temperature range -55 to timing available. n Supports Schottky TTL, FAST, and FACT logics. n Fanout 1 -- 20 loads; logic 0 -- 10 loads. n Temperature coefficient +2 ns or +4% (whichever is greater) at maximum delay, 0 to 70oC. +125oC and ceramic package IC to meet MIL-STD883C, but not screened to that specification, add suffix "M" to part number. n Military models as above, but with ceramic package IC screened to MIL-STD 883C and 38510, add suffix "MX" to part number. n Military models as "MX" above, but with in-house burn-in and thermal shock, add suffix "MY". LOW PROFILE SURFACE-MOUNT 5-TAP TTL DELAY LINES TAP D ELA YS (ns) T ECH NITROL PART NO. CT TLDL025 CT TLDL050 CT TLDL075 CT TLDL100 CT TLDL125 CT TLDL150 CT TLDL200 ALL TAPS O.175" MAX HEIGHT TD 1 D 5.0 10.0 15.0 20.0 25.0 30.0 40.0 TD 2 D 10.0 20.0 30.0 40.0 50.0 60.0 80.0 TD 3 D 15.0 30.0 45.0 60.0 75.0 90.0 120.0 TD 4 D 20.0 40.0 60.0 80.0 100.0 120.0 160.0 TD 5 D 25.0 50.0 75.0 100.0 125.0 150.0 200.0 TRO RO 2.0 2.0 2.0 2.0 2.0 2.0 2.0 TFO FO 2.0 2.0 2.0 5.0 5.0 6.0 7.0 For TTL delay lines qualified to MIL-D-83532, refer to PSC information sheet entitled "QPL Active Delay Lines." Delay Characteristics measured at Vcc = 5.0V, 25oC, no load. Delay Tolerance +2 ns or 5%, whichever is greater. Rise time measured @ 0.8V to 2.0V levels. For minimum input pulse width -- contact factory. MECHANICAL OUTLINE SCHEMATIC Notes n Pin numbers shown are for reference only and are not necessarily marked on unit. n Lead material is electro tin plated (alloy 42) or solder dipped. n All specifications are subject to change without notice. TWO PEARL BUCK COURT l BRISTOL, PA 19007-6812 l TEL 215-781-6400 l FAX 215-781-6403 l www.pulsespecialty.com SURFACE-MOUNT 5-TAP TTL DELAY LINES -- 1/2" SQ. ALL TAPS T ECHNITR OL PAR T NO. PART NO. PA RT NO. TAP D ELAYS (ns) CTTLDL, BJTTLDL, GBTTLDL, BTTLDL (Max.) TD 5 D 25.0 50.0 75.0 100.0 125.0 150.0 200.0 TD 1 D BJT TLDL025 BJT TLDL050 www..com BJT TLDL075 BJT TLDL100 BJT TLDL125 BJT TLDL150 BJT TLDL200 GBTT LDL025 GBTT LDL050 GBTT LDL075 GBTT LDL100 GBTT LDL125 GBTT LDL150 GBTT LDL200 BT TTLDL25 BT TTLDL50 BT TTLDL75 BTTTLDL100 BTTTLDL125 BTTTLDL150 BTTTLDL200 5.0 10.0 15.0 20.0 25.0 30.0 40.0 TD 2 D 10.0 20.0 30.0 40.0 50.0 60.0 80.0 TD 3 D 15.0 30.0 45.0 60.0 75.0 90.0 120.0 TD 4 D 20.0 40.0 60.0 80.0 100.0 120.0 160.0 TRO RO 2.0 2.0 2.0 2.0 2.0 2.0 2.0 TFO FO 2.0 2.0 2.0 5.0 6.0 7.0 8.0 Delay Characteristics measured at Vcc = 5.0V, 25oC, no load. Delay Tolerance +2 ns or 5%, whichever is greater. Rise time measured @ 0.8V to 2.0V levels. For minimum input pulse width -- contact factory. SCHEMATICS BJTTLDL MECHANICAL OUTLINES J-Lead BJTTLDL GBTTLDL and BTTLDL Gull Wing GBTTLDL C-Lead BTTLDL Notes n Pin numbers shown are for reference only and are not necessarily marked on unit. n Lead material is electro tin plated (alloy 42) or solder dipped. n All specifications are subject to change without notice. TWO PEARL BUCK COURT l BRISTOL, PA 19007-6812 l TEL 215-781-6400 l FAX 215-781-6403 l www.pulsespecialty.com |
Price & Availability of BJTTLDL |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |