 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| BATTERY DRIVEN, FTP-608 Series 2" HIGH SPEED THERMAL PRINTER www..com FTP-628MCL053/054 s OVERVIEW The FTP-628 MCL Series are battery driven high-speed ultracompact printers with a 2-inch paper width equivalent. Paper can be easily set using our unique platen release mechanism. The FTP-628 MCL Series can be used for a variety of applications, such as portable terminals, POS, ticket issuing terminals, label printers, banking terminals, and measurement and medical equipment. s HIGHLIGHTS * Ultra compact Height 15.5 mm, width 69.6 mm, depth 34.3 mm * High speed printing It can print at 60 mm/s (480 dotlines/s) maximum by using Fujitsu's unique head drive control. * High resolution printing / Kanji supported 8 dots/mm of resolution printing is possible. * Easy paper setting Our unique platen release mechanism allows a wide paper route even if the printer is ultra-compact, so paper can be easily inserted. Conventional auto loading is also available. * Two types of paper routes Front or bottom feed, depending on the paper route. * Easy mounting Wiring for the head, motor, sensor are housed within one flexible cable (053, 054) or in two cables (051, 052). The mechanism can be secured by one hook and two screws at two locations, making mounting easy. 1 FTP-628MCL053/054 s PART NUMBERS Part Number Printer mechanism LSI for driving Interface Board w w w . D a t a FTP-628MCL053 (front paper insertion with head open detection switch and knob) FTP-628MCL054 (bottom paper insertion with head open detection switch) FTP-628CU301 (ANK only) FTP-628DCL300 (Centronics) FTP-628DSL305 Serial (RS232C) Parallel Serial Parallel Serial Head, motor S h e e Interface cables Power cable FTP-628Y202 FTP-628Y302 FTP-628Y402 t 4 U . c o m s SPECIFICATIONS Item Part number Printing method Dot structure Dot pitch (Horizontal) Dot pitch (Vertical) Effective printing area Number of columns Paper width Paper thickness Printing Speed Character types FTP-628MCL053/054 Thermal-line dot method 384 dots/line 0.125 mm (8 dots/mm)--Dot density 0.125 mm (8 dots/mm)--Line feed pitch 48 mm ANK 32 columns/line (maximum 12 x 24 dot font) 58 mm+0 -1 60 to 100 m (some paper in this range may not be used because of paper characteristics) Maximum 60mm/sec. (480 dot line/sec.) at 8.5V Alphanumeric, katakana: International and special characters: JIS Kanji level 1, level 2, non-Kanji (supported only by FTP-628DSL228, DCL208): 159 types 195 types about 6800 types Specifications Character, dimensions (WxH), number of columns 12 x 24 dots, (1.54 x 3.0 mm), 32 columns: alphanumeric, katakana 24 x 24 dots, (3.0 x 3.0 mm), 16 columns: alphanumeric, katakana, Kanji 8 x 16 dots, (1.0 x 2.0 mm), 48 columns: alphanumeric, katakana 16 x 16 dots, (1.0 x 2.0 mm), 24 columns: alphanumeric, katakana, Kanji 2 FTP-628MCL053/054 s SPECIFICATIONS Item Interface For print head Power supply www..com Specification Conforms to RS232C / Centronics 4.2 - 8.5 VDC average current, 0.87 (0.93) A peak value (print ratio: 12.5%, print speed: 50mm/sec. at 7.2V ) 4.2 - 8.5 VDC, 1A maximum Note: 5.8 to 8.5 V is recommended for automatic paper loading 5 VDC 5%, 0.1 A maximum 72.3 x 34.3 x 15.5 mm (WxDxH) 69.3 x 52 x 15 mm Approximately 47g (without knob) Approximately 20g Pulse resistance: 100 million pulses/dot (under our standard conditions) Abrasion resistance: paper traveling distance 50km (print ratio: 25% or less) For motor For logic Printer mechanism Dimensions Interface board Printer mechanism Weight Interface board Head life Operating temperature* Operating humidity Operating environment Storage temperature Storage humidity Head temperature detection Paper out/mark detection Head up detection 0 C to +50 C 20 to 85% RH (no condensation) -20 C to +60 C (paper not included) 5 to 95% RH (no condensation) Detected by thermistor Detected by photo-interrupter Detected by micro-switch High Sensitive Paper Standard paper: TF50KS-E4 (Nippon Paper) TF60KS-E(Nippon Paper) FTP-020PU001 (58mm) PD105R (Oji Paper) FTP-020P0701 (58mm) TF60KS-F1 FTP-020P0102 (58mm) PD170R (Oji Paper) P220VBB-1 Mitsubishi Paper) PD160R-N (Oji Paper) Detection function Recommended thermal sensitive paper Medium Life Paper Long Life Paper *+5C to +40C printing density assurance rance (-25 to 70C capability) 3 FTP-628MCL053/054 s DIMENSIONS 1. Printer mechanism FTP-628MCL054 FTP-628MCL053 www..com Unit: mm Note: 1. Dimensions are nominal value (tolerance 5 unless otherwise specified). 2. Platen unit (lever, platen, etc) moves by approximately 0.7mm toward paper insertion direction when platen is open. 2. Interface board Unit: mm 4 FTP-628MCL053/054 Connector (FPC) specification (1) Connector Mechanical unit side: FPC connector Remote side (housing site): 52030-3090 (made by Molex) (2) Pin assignment on the mechanical side No 1 2 w w w . D a Signal PHK VSEN PE a HS SW1 SW2 VH VH DI CLK GND GND STB6 STB5 STB4 VDD TM TM STB3 STB2 STB1 GND GND LAT DO VH VH MT/A MT/A MT/B MT/B h e e t 4 I/O -- I UO . Contents Cathode for photo interruptor paper sensor power E it m c mo tor for photo interruptor 3t 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 O I I Platen release switch Platen release switch Head drive power I I I -- Ground power supply for thermal head -- I I I I O O I I I -- Ground power supply for thermal head -- I O I Power supply for thermal head I I I Stepping motor excitation signal I I 5 Data in Synchronous clock for communication Thermal head energizing control signal Logic power Thermally sensitive resistor input termnial 1 Thermally sensitive resistor input termnial 2 Thermal head energizing control signal Data latch Data out FTP-628MCL053/054 s FUNCTION OF INTERFACE BOARD Item 1. 2. 3. www..com. 4 Item 8. 9. 10. 11. 12. 13. Motor power saving function Mark detection function MCU operation abnormality detection Power ON/OFF sequence protection Motor over-current protection Hardware timer Test print function Paper out detection Paper near end detection Platen open detection Thermal head temperature abnormality detection Blow-out fuse detection Head voltage abnormality detection 5. 6. 7. Sensor (Photointerruptor) Platen unit Thermal head Motor FPC Connect terminal: surface side Connector No 30,29, .....................2,1 (FPC pin numbers) Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: www.fcai.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: www.fceu.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com Fujitsu Components International Headquarter Offices (c) 2004 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 11/15/2004. 6 |
Price & Availability of FTP-628MCL053
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |