Part Number Hot Search : 
UTX4105 VUC25 2SC2062S PI6C2308 CEM4936 331MH 201VX MIP3E3
Product Description
Full Text Search
 

To Download AC-404AYILY-73 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 www..com
LCD MODULE
Article No.:
AC-404AYILY-73
40 x 4 Characters STN yellowgreen Technology with yellowgreen led backlight
Gleichmann & Co. Electronics GmbH Industriestr. 16 76297 Stutensee Germany Tel.: +49 (07249) 910-151 Fax: +49 (07249) 910-559 Email: rbo@msc-ge.com Internet: www.msc-ge.com
AMP I RE
SPECIFICATIONS FOR LCD MODULE
www..com
CUSTOMER CUSTOMER PART NO. AMPIRE PART NO. APPROVED BY DATE AC-404AYILY-73
APPROVED BY
CHECKED BY
ORGANIZED BY
DATE : 2003/12/25
AMPIRE CO., LTD.
1
RECORD OF REVISION
Revision Date 2002/7/26 2003/12/25 Page 3 New Release Change the IC to ST7066U Patrick Contents Editor
www..com
DATE : 2003/12/25
AMPIRE CO., LTD.
2
1
FEATURES
(1) Display format : 40 characters x 4 lines (2) Construction : LCD, Black Bezel, Yellow-green LED back-light and PCB. (3) Display type : STN , Yellow-green mode ,Transflective , 6 o'clock view. (4) Controller : ST0066U. (5) 5V single power input. (6) www..com Normal temperature type.
(7) Excellent LC : VOP maintains at 5V for whole temp. range, no need extra temp. compensation circuit.
2
MECHANICAL DATA
Parameter Dot size Dot pitch Character size Viewing area Module size (LED back-light) Stand Value 0.50(W) x 0.55(H) 0.57(W) x 0.62(H) 2.78(W) x 4.89(H) 147.0(W) x 29.5(H) 190.0(W) x 54.0(H) x 14.0 max (T) Unit mm mm mm mm mm
3
ABSOLUTE MAXIMUM RATINGS
Parameter Logic Circuit Supply Voltage LCD Driving Voltage Input Voltage Symbol VDD-VSS VDD-VO VI TOP TSTG Min -0.3 -0.3 -0.3 0 -20 Max 7.0 10.0 VDD+0.3 50 70 Unit V V V C C
Normal temp. type
Operating Temp. Storage Temp.
DATE : 2003/12/25
AMPIRE CO., LTD.
3
4
ELECTRO-OPTICAL CHARACTERISTICS
Parameter Logic Circuit Supply Voltage LCD Driving Voltage Symbol VDD-VSS VDD-VO Condition -0 C 25 C 50 C VIH VIL Logic Supply Current Contrast Rise Time Fall Time Viewing Angle Range IDD --VDD = 5V Min 4.5 4.75 4.75 4.75 0.7 VDD VSS -Typ 5.0 5.0 5.0 5.0 --3.0 Max 5.5 5.25 5.25 5.25 VDD 0.3 VDD 4.0 V V mA Unit V V 0 ~ 50 C for Normal Temp. type Note
----- Electronic Characteristics -----
www..com
Input Voltage
----- Optical Characteristics ----CR tr tf f b l r Frame Frequency Forward Voltage Forward Current fF VF IF 25C -VF=4.1V IF=600mA 25C 25C 25C 25C & CR2 -----------5 150 150 40 30 35 35 64 4.1 600 30
A
-200 200 -----4.3 --Hz V mA cd/m2 Deg. ms ms
Note 1 Note 2 Note 3
----- LED Back-light Characteristics ----Supply Voltage between A&K
LCM Luminous intensity
* LED Dice number = 2x =120
K
DATE : 2003/12/25
AMPIRE CO., LTD.
4
(NOTE 1) Contrast ratio : CR = (Brightness in OFF state) / (Brightness in ON state) ( NOTE 2 ) Response time :
www..com
(NOTE 3) Viewing angle
DATE : 2003/12/25
AMPIRE CO., LTD.
5
5
BLOCK DIAGRAM & INTERFACE
D0 D7 RS R/W VDD VO VSS E1
www..com
CONTROL LSI(1)
4 SEG 40 COM 16
DRIVER * 2
SEG 160
LCD
CONTROL LSI(2) E2
COM 16
SEG 40
SEG 160
4
DRIVER * 2
No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Symbol DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 E1 R/W RS VO VSS VDD E2 NC Data Bus Data Bus Data Bus Data Bus Data Bus Data Bus Data Bus Data Bus Enable Signal Read/Write Select
Function
Data/Instruction Select Contrast Adjustment Ground (0V) Supply Voltage for Logic (+5V) Enable Signal (no pull-up resistor) No connection
DATE : 2003/12/25
AMPIRE CO., LTD.
6
6
POWER SUPPLY
VDD(+5V)
LCD Bias Circuit VO
R1 VR
LCD Module
www..com
R2 VSS
5V Power Input
600mA 4.1V + LEDA LED back-light LEDK
DATE : 2003/12/25
AMPIRE CO., LTD.
7
7
TIMING CHARACTERISTICS
Write Operation
www..com
Item Enable cycle time Enable pulse width (high level) Enable rise/fall time Address set-up time (RS, R/W to E) Address hold time Data set-up time Data hold time
Symbol tcycE PWEH tEr,tEf tAS tAH tDSW tH
Min 1200 140 0 10 40 10
Typ -
Max 25 -
Unit ns
DATE : 2003/12/25
AMPIRE CO., LTD.
8
Read Operation
www..com
Item Enable cycle time Enable pulse width (high level) Enable rise/fall time Address set-up time (RS, R/W to E) Address hold time Data delay time Data hold time
Symbol tcycE PWEH tEr,tEf tAS tAH tDDR tDRH
Min 1200 140 0 10 -10
Typ -
Max 25 100 -
Unit ns
DATE : 2003/12/25
AMPIRE CO., LTD.
9
8
DD RAM ADDRESS
1 00 40 00 40 2 01 41 01 41 3 02 42 02 42 ... ... ... ... ... 38 25 65 25 65 39 26 66 26 66 40 27 67 27 67
CHAR. LINE 1 LINE 2 LINE 3 LINE 4
www..com
DATE : 2003/12/25
AMPIRE CO., LTD.
10
9
FONT TABLE
www..com
DATE : 2003/12/25
AMPIRE CO., LTD.
11
10 QUALITY AND RELIABILITY 10.1 TEST CONDITIONS
Tests should be conducted under the following conditions : Ambient temperature : 25 5C Humidity : 60 25% RH.
10.2 SAMPLING PLAN
www..com
Sampling method shall be in accordance with MIL-STD-105E, inspection level II, normal inspection, and single sampling plan tables for normal, tightened, and reduced inspection.
10.3 ACCEPTABLE QUALITY LEVEL
A major defect is defined as one that could cause failure to or materially reduce the usability of the unit for its intended purpose. A minor defect is one that does not materially reduce the usability of the unit for its intended purpose or is an infringement from established standards and has no significant bearing on its effective use or operation.
10.4 APPEARANCE
An appearance test should be conducted by human sight at approximately 30 cm distance from the LCD module under flourescent light. The inspection area of LCD panel shall be within the range of following limits.
DATE : 2003/12/25
AMPIRE CO., LTD.
12
10.5 INSPECTION QUALITY CRITERIA
Item Function Dimension Black spots Description of defects Class of Defects Major Major Minor Acceptable level (%) 0.65 1.5 2.5
www..com
Black lines
Bubbles in polarizer Color uniformity Glass Scratches Contrast ratio Response time Viewing angle
Short circuit or Pattern cut Deviation from drawings Ave . dia . D area A area B Disregard D0.2 3 4 0.2 0.5 for N = 1 Rainbow color or newton ring. Obvious visible damage. See note 1 See note 2 See note 3
Minor
2.5
Minor Minor Minor Minor Minor Minor
2.5 2.5 2.5 2.5 2.5 2.5
Zone A active area Zone B viewing area
DATE : 2003/12/25
AMPIRE CO., LTD.
13
10.6 RELIABILITY
Test Conditions Test Item High Temperature Operation Low Temperature Operation High Temperature Storage Low Temperature Storage
www..com
Normal Temp. type 503C , t=96 hrs 03C , t=96 hrs 703C , t=96 hrs -203C , t=96 hrs -20C ~ 25C ~ 70C 30 m in. 5 min. 30 min. Total 5 cycle 40 C, Humidity 90%, 96 hrs
Note
1,2 1,2 ( 1 cycle ) 1,2 1,2
Thermal Shock Test Humidity Test
Sweep frequency : 10 ~ 55 ~ 10 Hz/1min Amplitude : 0.75mm Vibration Test (Packing) 2 Test direction : X.Y.Z/3 axis Duration : 30min/each axis Note 1 : Condensation of water is not permitted on the module. Note 2 : The module should be inspected after 1 hour storage in normal conditions (15-35C , 45-65%RH). Definitions of life end point : Current drain should be smaller than the specific value. Function of the module should be maintained. Appearance and display quality should not have degraded noticeably. Contrast ratio should be greater than 50% of the initial value.
DATE : 2003/12/25
AMPIRE CO., LTD.
14
11 HANDLING PRECAUTIONS
(1) An LCD module is a fragile item and should not be subjected to strong mechanical shocks. (2) Avoid applying pressure to the module surface. This will distort the glass and cause a change in colour. (3) Under no circumstances should the position of the bezel tabs or their shape be modified.
www..com
(4) Do not modify the display PCB in either shape or positioning of components. (5) Do not modify or move location of the zebra or heat seal connectors. (6) The device should only be soldered to during interfacing. Modification to other areas of the board should not be carried out.
(7) In the event of LCD breakage and resultant leakage of fluid do not inhale, ingest or make contact with the skin. If contact is made rinse immediately. (8) When cleaning the module use a soft damp cloth with a mild solvent, such as Isopropyl or Ethyl alcohol. The use of water, ketone or aromatic is not permitted. (9) Prior to initial power up input signals should not be applied. (10) Protect the module against static electricity and observe appropriate anti-static precautions.
DATE : 2003/12/25
AMPIRE CO., LTD.
15
12 OUTLINE DIMENSION
(R)O )
( A |a
~ 3/4A I
www..com
DATE : 2003/12/25
AMPIRE CO., LTD.
o
u
q
i
16


▲Up To Search▲   

 
Price & Availability of AC-404AYILY-73

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X