 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| www..com Super Fast Recovery Diode RF04UA2D Series Standard Fast Recovery Dimensions (Unit : mm) Land size figure (Unit : mm) 1.9 0.95 0.95 Applications High frequency rectification 1.0 min. Features 1)Surface mounting type (TSMD6) 2)High reliability 0.7 TSMD6 0.8 Structure (6) (5) (4) Construction Silicon epitaxial planer (1) (2) (3) Taping dimensions (Unit : mm) 4.00.1 2.00.05 1.550.1 0 1.750.1 0.30.1 3.50.05 3.20.08 8.00.2 2.4 3.20.08 1.10.08 0.45 0.35 0.35 0.45 3.20.08 4.00.1 1.10.1 Absolute maximum ratings (Ta=25C) Parameter Repetitive peak Reverse voltage Reverse voltage Average rectified forward current Forward current surge peak Junction temperature Storage temperature Symbol VRM VR Io/2 IFSM Tj Tstg Conditions Direct voltage Glass epoxy substrate mounted Ta=25C 60Hz half sin wave,resistive load Tc=130C Limits 200 200 0.4 1 00.5 5.50.2 Unit V V A A 60Hz half sin wave, Non-repetitive one cycle peak value, Tj=25C 150 C -40 to +150 C (* Standard of per diode) Electrical characteristics (Tj=25C) Parameter Symbol VF Forward voltage IR Reverse current Reverse recovery time trr Conditions IF=0.2A VR=200V IF=0.5A,IR=1A,Irr=0.25xIR Min. Typ. 0.86 0.01 11 Max. 0.98 10 25 Unit V A ns www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. 1/3 2010.01 - Rev.A RF04UA2D Electrical characteristics curves www..com Data Sheet 10 10000 Tj=150C Tj=125C 100 f=1MHz FORWARD CURRENT : IF(A) 1 Tj=125C 100 Tj=75C CAPACITANCE BETWEEN TERMINALS : Ct(pF) 200 Tj=150C REVERSE CURRENT : IR(nA) 1000 10 0.1 Tj=25C Tj=75C 10 Tj=25C 1 0.01 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 0 0 50 100 150 1 0 5 10 15 20 25 30 FORWARD VOLTAGE : VF(V) VF-IF CHARACTERISTICS REVERSE VOLTAGE : VR(V) VR-IR CHARACTERISTICS REVERSE VOLTAGE : VR(V) VR-Ct CHARACTERISTICS 880 1000 30 FORWARD VOLTAGE : VF(mV) REVERSE CURRENT : IR(nA) 870 100 CAPACITANCE BETWEEN TERMINALS : Ct(pF) Tj=25C IF=0.2A n=30pcs Tj=25C VR=200V n=30pcs 20 AVE:10.9pF Tj=25C f=1MHz VR=0V n=10pcs 860 10 AVE:1.3n 850 10 840 1 AVE : 830 0.1 0 VF DISPERSION MAP IR DISPERSION MAP Ct DISPERSION MAP 30 30 1000 RESERVE RECOVERY TIME : trr(ns) PEAK SURGE FORWARD CURRENT : IFSM(A) 20 8.3ms AVE:10.2A 20 15 10 5 0 AVE:10.2ns PEAK SURGE FORWARD CURRENT : IFSM(A) Ifsm 1cyc 25 Tj=25C IF=0.5A IR=1A Irr=0.25xIR n=10pcs Ifsm 100 8.3ms 8.3ms 1cyc 10 10 0 1 1 10 100 IFSM DISRESION MAP trr DISPERSION MAP NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS 1000 30 10000 Ifsm PEAK SURGE FORWARD CURRENT : IFSM(A) t 100 25 20 15 10 5 0 AVE : 3.9kV TRANSIENT THAERMAL IMPEDANCE : Rth (C/W) ELECTROSTATIC DISCHARGE TEST ESD(KV) AVE : 21.9kV IM=10mA 1000 IF=1A 1ms time Rth(j-a) 300s 100 Rth(j-c) 10 On glass-epoxy board 1 0.001 10 1 1 10 100 C=200pF R=0 C=100pF R=1.5k 0.01 0.1 1 10 100 1000 TIME : t(ms) IFSM-t CHARACTERISTICS ESD DISPERSION MAP TIME : t(s) Rth-t CHARACTERISTICS www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. 2/3 2010.01 - Rev.A RF04UA2D 0A 0V t T Io VR D=t/T VR=200V Tj=150C AVERAGE RECTIFIED FORWARD CURRENT : Io(A) www..com 0A 0V 0.35 D.C. 0.3 D.C. Data Sheet Io VR T D=t/T VR=200V Tj=150C t 0.25 D.C. 0.2 D=0.8 D=0.5 0.15 half sin wave D=0.2 0.1 D=0.1 D=0.05 0.35 0.3 AVERAGE RECTIFIED FORWARD CURRENT : Io(A) FORWARD POWER DISSIPATION : Pf(W) 0.25 0.2 0.15 0.1 0.05 0 D=0.8 0.25 0.2 D=0.8 half sin wave D=0.5 D=0.2 half sin wave 0.15 0.1 0.05 0 D=0.2 D=0.5 0.05 D=0.05 D=0.1 D=0.05 0 30 D=0.1 0 0 0.05 0.1 0.15 0.2 0.25 0.3 0.35 0 30 60 90 120 150 60 90 120 150 AVERAGE RECTIFIED FORWARD CURRENT : Io(A) Io-Pf CHARACTERISTICS AMBIENT TEMPERATURE : Ta(C) Derating Curve"(Io-Ta) CASE TEMPARATURE : Tc(C) Derating Curve(Io-Tc) www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. 3/3 2010.01- Rev.A Notice www..com Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2010 ROHM Co., Ltd. All rights reserved. R1010A |
Price & Availability of RF04UA2D
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |