View REF01_189000.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

www..com
19-0887; Rev 3; 6/03
+5V, +10V Precision Voltage References
General Description
The REF01/REF02 are industry-standard precision voltage references. The stable 10V output of the REF01 can be adjusted over a 3% range with minimal effect on temperature stability, while the 5V output REF02 can be adjusted over a 6% range. The 10V REF01 has a single-supply operation over an input voltage range of 13V to 33V, while the 5V REF02 has a single-supply operation over an input voltage range of 7V to 33V. Both devices offer a low-current drain of 1mA. The REF02 also provides a TEMP pin whose output voltage varies linearly with temperature, making this device suitable for a wide variety of temperature-sensing and control applications. For new designs, please refer to the MAX6035 or MAX6143 data sheets. o Pretrimmed to +5V, +10V 0.3% o Excellent Temperature Stability: 3ppm/C o Low Noise: 10VP-P (REF02) o Low Supply Current: 1.4mA (max) o Short-Circuit Proof o Linear Temperature Transducer Output (REF02)
Features
REF01/REF02
Ordering Information
www..com
1
PART REF01EP REF01HP REF01HSA REF01CP REF01CSA REF01CESA REF02EP REF02HP REF02HSA REF02CP REF02CSA REF02CESA TEMP RANGE 0C to +70C 0C to +70C 0C to +70C 0C to +70C 0C to +70C -40C to +85C 0C to +70C 0C to +70C 0C to +70C 0C to +70C 0C to +70C -40C to +85C MAX TEMPCO (ppm/C) 8.5 25 25 65 65 65 8.5 25 25 65 65 65 INITIAL ERROR (mV) 30 50 50 100 100 100 15 25 25 50 50 50 PIN-PACKAGE 8 Plastic DIP 8 Plastic DIP 8 SO 8 Plastic DIP 8 SO 8 SO 8 Plastic DIP 8 Plastic DIP 8 SO 8 Plastic DIP 8 SO 8 SO
Ordering Information continued at end of data sheet.
Applications
Typical Operating Circuit
-15V 2 VIN VO 6 OUTPUT
ww..com
Analog-to-Digitial Converters Digitial-to-Analog Converters Digital Voltmeters Voltage Regulators Threshold Detectors
REF01 REF02 TRIM 5
GND 4
RP 10k
REFERENCE WITH TRIMMED OUTPUT.
________________________________________________________________ Maxim Integrated Products
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com. www..com
www..com www..com 4U
DataSheet 4 U .com
www..com
+5V, +10V Precision Voltage References REF01/REF02
ABSOLUTE MAXIMUM RATINGS-REF01
Input Voltage REF01, A, E, H, All DICE .....................................................40V REF01C ...............................................................................30V Continuous Power Dissipation T099 (J) (derate at 7.1mWC above +80C).................500mW CERDIP (2) (derate at 6.7mW/C above +75C) .........500mW Plastic Dip (P) (derate at 5.6mW/C above +36C) .....500mW Small Outline (S) (derate at 5.0mW/C above +55C) ..300mW Output Short-Circuit Duration (to ground or VIN) .......................................................Indefinite Storage Temperature Range .............................-65C to +150C Operating Temperature Range REF01A, REF01 ..............................................-55C to +125C REF01E, REF01H, REF01C (except REF01CESA)...........................................0C to +70C REF01CESA ......................................................-40C to +85C DICE Junction Temperature (Tj) ........................-65C to +150C Lead Temperature (soldering, 60s) .................................+300C
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS-REF01
(VIN = +15V, TA = +25C, unless otherwise noted.)
PARAMETER Output Voltage Output Adjustment Range Output Voltage Noise Line Regulation Load Regulation Turn-On Settling Time Quiescent Supply Current Load Current Sink Current Short-Circuit Current tON ISY IL IS ISC VO = 0V SYMBOL VO Vtrim enP-P IL = 0 RP = 10k 0.1Hz to 10Hz (Note 1) VIN = 13V to 33V (Note 2) IL = 0 to 10mA (Note 2) To 0.1% of final value No load 10 -0.3 CONDITIONS MIN 9.97 3.0 REF01A/E TYP 10.00 3.3 20 0.006 0.005 5 1.0 21 -0.5 30 1.4 10 -0.3 30 0.010 0.008 MAX 10.03 MIN 9.95 3.0 REF01/H TYP 10.00 3.3 20 0.006 0.006 5 1.0 21 -0.5 30 1.4 30 0.010 0.010 MAX UNITS
% VP-P %/V %/mA s mA mA mA mA
ELECTRICAL CHARACTERISTICS-REF01
(VIN = +15V, -55C TA +125C for REF01A and REF01, 0C TA +70C for REF01E and REF01H, IL = 0mA, unless otherwise noted.)
REF01A/E PARAMETER SYMBOL CONDITIONS MIN Output Voltage Change with Temperature (Notes 3, 4) Output Voltage Temperature Coefficient Change in VO Temperature Coefficient with Output Adjustment Line Regulation (VIN = 13V to 33V) (Note 2) Load Regulation (IL = 0 to 8mA) (Note 2) 0C TA +70C -55C TA +125C 0C TA +70C -55C TA +125C 0.007 0.009 0.006 0.007 0.012 0.015 0.010 0.012 0.007 0.009 0.007 0.009 0.012 0.015 0.012 0.015 %/mA %/V VOT 0C TA +70C -55C TA +125C (Note 5) TYP 0.02 0.06 3 MAX 0.06 0.15 8.5 MIN TYP 0.07 0.18 10.0 MAX 0.17 0.45 25.0 % REF01/H UNITS
ww..com
TCVO
ppm/C
RP = 10k
0.7
0.7
ppm/%
2
_______________________________________________________________________________________
www..com
www..com www..com 4U
DataSheet 4 U .com
www..com
10.05
V
www..com
+5V, +10V Precision Voltage References
ELECTRICAL CHARACTERISTICS-REF01 (continued)
(VIN = +15V, -55C TA +125C for REF01A and REF01, 0C TA +70C for REF01E and REF01H, IL = 0mA, unless otherwise noted.)
PARAMETER Output Voltage Output Adjustment Range Output Voltage Noise Line Regulation Load Regulation (Note 2) Turn-On Settling Time Quiescent Supply Current Load Current Sink Current Short-Circuit Current tON ISY IL IS ISC VO = 0V SYMBOL VO Vtrim enP-P IL = 0mA RP = 10k 0.1Hz to 10Hz (Note 1) VIN = 13V to 30V (Note 2) IL = 0 to 8mA IL = 0 to 4mA To 0.1% of final value No load 8 -0.2 CONDITIONS REF01C MIN 9.90 2.7 TYP 10.00 3.3 25 0.009 0.006 0.006 5 1.0 21 -0.5 30 1.6 35 0.015 0.015 0.015 s mA mA mA mA MAX 10.10 UNITS V % VP-P %/V %/mA
ELECTRICAL CHARACTERISTICS-REF01
(VIN = +15V, TA = TMIN to TMAX, unless otherwise noted.)
PARAMETER Output Voltage Change with Temperature Output Voltage Temperature Coefficient Change in VO Temperature Coefficient with Output Adjustment Line Regulation Load Regulation SYMBOL CONDITIONS MIN VOT (Notes 3, 4) REF01C TYP 0.14 MAX 0.45 % UNITS
TCVO
(Note 5)
20
65
ppm/C
RP = 10k VIN = 13V to 30V (Note 2) IL = 0 to 5mA (Note 2)
0.7 0.011 0.008 0.018 0.018
ppm/% %/V %/mA
Note 1: Guaranteed by design for REF01HP, REF01HSA, REF01CP, REF01CSA, REF01CESA, REF02HP, REF02HSA, REF02CP, REF02CSA, REF02CESA. Sample tested for all other grades and packages. Note 2: Line and load regulation specifications include the effect of self heating. Note 3: VOT is defined as the absolute difference between the maximum output voltage and the minimum output voltage over the specified temperature range expressed as a percentage of 10V.
ww..com
-V V VOT = MAX MIN x 100 10V Note 4: VOT specification applies trimmed to +10.000V or untrimmed. Note 5: TCVO is defined as VOT divided by the temperature range.
Output Adjustment
The REF01 trim terminal can be used to adjust the voltage over a 10V 300mV range. This feature allows the system designer to trim system errors by setting the reference to a voltage other than 10V, including 10.240V for binary applications (see the Typical Operating Circuit).
Adjustment of the output does not significantly affect the temperature performance of the device. The temperature coefficient change is approximately 0.7ppm/C for 100mV of output adjustment.
_______________________________________________________________________________________
3
www..com
www..com www..com 4U
DataSheet 4 U .com
www..com
REF01/REF02
www..com
+5V, +10V Precision Voltage References REF01/REF02
ABSOLUTE MAXIMUM RATINGS-REF02
Input Voltage REF02, A, E, H, All DICE .....................................................40V REF02C, D...........................................................................30V Continuous Power Dissipation T099 (J) (derate at 7.1mWC above +80C).................500mW CERDIP (2) (derate at 6.7mW/C above +75C) .........500mW Plastic Dip (P) (derate at 5.6mW/C above +36C) .....500mW Small Outline (S) (derate at 5.0mW/C above +55C) ..300mW Storage Temperature Range .............................-65C to +150C Operating Temperature Range REF02A, REF02 ..............................................-55C to +125C REF02E, REF02H (except REF02CESA)..............0C to +70C REF02C (except REF02CESA), REF02D .............0C to +70C REF02CESA ......................................................-40C to +85C Lead Temperature (soldering, 60s) .................................+300C DICE Junction Temperature (Tj) ........................-65C to +150C Output Short-Circuit Duration (to ground or VIN) .......................................................Indefinite
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS-REF02
(VIN = +15V, TA = +25C, unless otherwise noted.)
PARAMETER Output Voltage Output Adjustment Range Output Voltage Noise Line Regulation Load Regulation Turn-On Settling Time Quiescent Supply Current Load Current Sink Current Short-Circuit Current Temperature Voltage Output tON ISY IL IS ISC VT VO = 0V (Note 8) SYMBOL VO Vtrim enP-P IL = 0 RP = 10k 0.1Hz to 10Hz (Note 6) VIN = 8V to 33V (Note 7) IL = 0 to 10mA (Note 7) To 0.1% of final value No load 10 -0.3 CONDITIONS REF02A/E MIN 4.985 3 TYP 5.000 6 10 0.006 0.005 5 1.0 21 -0.5 30 630 1.4 10 -0.3 15 0.010 0.010 MAX 5.015 MIN 4.975 3 REF02/H TYP 5.000 6 10 0.006 0.006 5 1.0 21 -0.5 30 630 1.4 15 0.010 0.010 MAX 5.025 UNITS V % VP-P %/V %/mA s mA mA mA mA mV
ELECTRICAL CHARACTERISTICS-REF02
(VIN = +15V, -55C TA +125C for REF02A and REF02, 0C TA +70C for REF02E and REF02H, IL = 0mA, unless otherwise noted.)
REF02A/E PARAMETER SYMBOL CONDITIONS MIN Output Voltage Change with VOT 0C TA +70C -55C TA +125C (Note 11) TYP 0.02 0.06 3 MAX 0.06 0.15 8.5 MIN TYP 0.07 0.18 10 MAX 0.17 0.45 25 ppm/C % REF02/H UNITS
ww..com
Temperature (Notes 9, 10) Output Voltage Temperature Coefficient Change in VO Temperature Coefficient with Output Adjustment Line Regulation (VIN = 8V to 33V) (Note 7) Load Regulation (IL = 0 to 8mA) (Note 7)
TCVO
RP = 10k 0C TA +70C -55C TA +125C 0C TA +70C -55C TA +125C
0.7
0.7
ppm/%
0.007 0.009 0.006 0.007
0.012 0.015 0.010 0.012
0.007 0.009 0.007 0.009
0.012 0.015 0.012 0.015 %/V
%/mA
4
_______________________________________________________________________________________
www..com
www..com www..com 4U
DataSheet 4 U .com
www..com
www..com
+5V, +10V Precision Voltage References
ELECTRICAL CHARACTERISTICS-REF02 (continued)
(VIN = +15V, -55C TA +125C for REF02A and REF02, 0C TA +70C for REF02E and REF02H, IL = 0mA, unless otherwise noted.)
REF02A/E PARAMETER Temperature Voltage Output Temperature Coefficient SYMBOL CONDITIONS MIN TCVT (Note 8) TYP 2.1 MAX MIN TYP 2.1 MAX mV/C REF02/H UNITS
REF01/REF02
ELECTRICAL CHARACTERISTICS-REF02
(VIN = +15V, TA = +25C, unless otherwise noted.)
PARAMETER Output Voltage Output Adjustment Range Output Voltage Noise Line Regulation Load Regulation (Note 7) Turn-On Settling Time Quiescent Supply Current Load Current Sink Current Short-Circuit Current Temperature Voltage Output tON ISY IL IS ISC VT VO = 0V (Note 8) SYMBOL VO Vtrim enP-P CONDITIONS IL = 0mA RP = 10k 0.1Hz to 10Hz (Note 6) VIN = 8V to 30V (Note 7) IL = 0 to 8mA IL = 0 to 4mA To 0.1% of final value No load 8 -0.2 5 1.0 21 -0.5 30 630 1.6 8 -0.2 REF02C MIN 4.950 2.7 TYP 5.000 6.0 12 0.009 0.006 18 0.015 0.015 0.015 5 1.0 21 -0.5 30 630 2.0 0.04 MAX 5.050 MIN 4.900 2.0 REF02D TYP 5.000 6.0 12 0.010 0.04 MAX 5.100 UNITS V %
%/V %/mA s mA mA mA mA mV
ELECTRICAL CHARACTERISTICS-REF02
(VIN = +15V, TA = TMIN to TMAX, IL = 0mA, unless otherwise noted.)
REF02C PARAMETER Output Voltage Change with SYMBOL CONDITIONS MIN VOT (Notes 9, 10) TYP 0.14 MAX 0.45 MIN TYP 0.49 MAX 1.7 % REF02D UNITS
ww..com
Temperature Output Voltage Temperature Coefficient Change in VO Temperature Coefficient with Output Adjustment Line Regulation Load Regulation Temperature Voltage Output Temperature Coefficient
TCVO
(Note 11)
20
65
70
250
ppm/C
RP = 10k
0.7
0.7
ppm/%
VIN = 8V to 30V (Note 7) IL = 0 to 5mA (Note 7) TCVT (Note 8)
0.011 0.008 2.1
0.018 0.018
0.012 0.016 2.1
0.05 0.05
%/V %/mA mV/C
_______________________________________________________________________________________
5
www..com
www..com www..com 4U
DataSheet 4 U .com
www..com
VP-P
www..com
+5V, +10V Precision Voltage References REF01/REF02
ELECTRICAL CHARACTERISTICS-REF02 (continued)
(VIN = +15V, TA = TMIN to TMAX, IL = 0mA, unless otherwise noted.) Note 6: Note 7: Note 8: Note 9: Guaranteed by design for REF01HP, REF01HSA, REF01CP, REF01CSA, REF01CESA, REF02HP, REF02HSA, REF02CP, REF02CSA, REF02CESA. Sample tested for all other grades and packages. Line and load regulation specifications include the effect of self heating. Limit current in or out of pin 3 to 50nA and capacitance on pin 3 to 30pF. VOT is defined as the absolute difference between the maximum output voltage and the minimum output voltage over the specified temperature range expressed as a percentage of 5V.
-V V VOT = MAX MIN x 100 5V Note 10: VOT specification applies trimmed to +5.000V or untrimmed. Note 11: TCVO is defined as VOT divided by the temperature range.
Output Adjustment
880 780 730 680 630 580 530 480 430 -60 -40 -20 0 20 40 60 80 100 120 140 TEMPERATURE (C)
Adjustment of the output does not significantly affect the temperature performance of the device. Typically, the temperature coefficient change is 0.7ppm/C for 100mV of output adjustment.
Temperature Voltage Output
The REF02 provides a temperature-dependent output voltage on the TEMP pin. This voltage is proportional to the absolute temperature, and has a scale factor of approximately 2.1mV/C (Figure 1). Output Voltage = 2.1(T + 273)mV where T = Temperature in C.
Figure 1. REF02 Temperature/Voltage Output vs. Temperature
ww..com
6
_______________________________________________________________________________________
www..com
www..com www..com 4U
DataSheet 4 U .com
www..com
TEMP VOLTAGE OUTPUT (mV)
The REF02 trim terminal can be used to adjust the output voltage over a 5V 300mV range. This feature allows the system designer to trim system errors by setting the reference to a voltage other than 5V (refer to the Typical Operating Circuit).
830
www..com
+5V, +10V Precision Voltage References
Typical Operating Characteristics
(TA = +25C, unless otherwise noted.)
LINE REGULATION vs. FREQUENCY
REF01/02 TOC01
REF01/REF02
REF01 OUTPUT WIDEBAND NOISE vs. BANDWIDTH (0.1Hz TO FREQUENCY INDICATED)
VIN = 15V TA = +25C
REF01/02 TOC02
REF02 OUTPUT WIDEBAND NOISE vs. BANDWIDTH (0.1Hz TO FREQUENCY INDICATED)
VIN = 15V TA = +25C OUTPUT NOISE (VP-P)
REF01/02 TOC03
76 66 LINE REGULATION (dB) 56 46 36 26 16 6 10 100 1k 10k 100k
10,000 VIN = 15V TA = +25C OUTPUT NOISE (VP-P)
10,000
1000
1000
100
100
10 1M 10 100 1k 10k 100k 1M FREQUENCY (Hz) FREQUENCY (Hz)
10 10 100 1k 10k 100k 1M FREQUENCY (Hz)
MAXIMUM LOAD CURRENT vs. INPUT VOLTAGE
REF01/02 TOC04
NORMALIZED LOAD REGULATION (IL = 10mA) vs. TEMPERATURE
VIN = 15V 1.3 LOAD REG (T)/LOAD REG (+25C) 1.2 1.1 1.0 0.9 0.8 0.7
REF01/02 TOC05
NORMALIZED LINE REGULATION vs. TEMPERTURE
1.3 LOAD REG (T)/LOAD REG (+25C) 1.2 1.1 1.0 0.9 0.8 0.7 0.6
REF01/02 TOC06
35 MAXIMUM LOAD CURRENT (mA) 30 25 20 15 10 5 0 10 15 20 INPUT VOLTAGE (V) TA = +25C 25 SHORT-CIRCUIT PROTECTION 500mW MAXIMUM DISSIPATION
1.4
1.4
0.6 -60 -40 -20 0 20 40 60 80 100 120 140 TEMPERATURE (C)
30
-60 -40 -20
0
20 40 60 80 100 120 140
TEMPERATURE (C)
MAXIMUM LOAD CURRENT vs. TEMPERTURE
REF01/02 TOC07
QUIESCENT CURRENT vs. TEMPERTURE
REF01/02 TOC08
OUTPUT CHANGE DUE TO THERMAL SHOCK
PERCENT CHANGE OUTPUT VOLTAGE (%) VIN = 15V
REF01/02 TOC09
30 VIN = 15V
1.3 VIN = 15V 1.2 QUIESCENT CURRENT (mA) 1.1 1.0 0.9 0.8 0.7
0.035 0.030 0.025 0.020 0.015 0.010 0.005 0
ww..com
MAXIMUM LOAD CURRENT (mA)
25 20 15 10 5 0 -60 -40 -20 0
TA = TA = +25C +75C
DEVICE IMMERSED IN +75C OIL BATH -10 0 10 20 30 40 50 60
20 40 60 80 100 120 140
-60 -40 -20
0
20 40 60 80 100 120 140
TEMPERATURE (C)
TEMPERATURE (C)
TIME (s)
_______________________________________________________________________________________
7
www..com
www..com www..com 4U
DataSheet 4 U .com
www..com
www..com
+5V, +10V Precision Voltage References REF01/REF02
Typical Applications
1.1mA 2 VIN VO 9V 6 + 2 VIN 6 VO 10k TRIM 5 10k +15V 5k +10V +15V
REF01 REF01
TRIM 9V GND 4 5 GND 100k 10.000V 4
OP-07
-15V
-10V
Figure 2. Precision Calibration Standard
Figure 3. 10V Reference
+15V
+15V 2 VIN VO 6
2 VO
REF02 TRIM
5.11k 5 1.5k 5% 50k 1.5k 2 7 6 VOUT (10mV/C)
REF02
3 GND 4 IOUT TRIM 5 R IOUT =
OP-07
3 4
5.0V + 1mA R
TEMP GND 4 *
200k -15V
*UP TO 10 FEET OF SHIELDED 4-CONDUCTOR CABLE.
Figure 4. Current Source
Figure 5. Precision Temperature Transducer with Remote Sensor
Chip Topography
VIN 2 0.078 (1.980) VOUT 6
ww..com
0.057 (1.450)
3 TEMP (REF02 ONLY)
4 GND
5 TRIM
8
_______________________________________________________________________________________
www..com
www..com www..com 4U
DataSheet 4 U .com
www..com
VIN
6
VREF 9.09k
www..com
+5V, +10V Precision Voltage References
Ordering Information (continued)
PART REF01AJ* REF01AZ* REF01CJ* REF01CP-2* REF01CZ* REF01EJ* REF01EZ* REF01HF* REF01HZ* REF01J* REF01Z* REF02AJ* REF02AZ* REF02CJ* REF02CZ* REF02DJ* REF02DP* REF02DSA* REF02EJ* REF02EZ* REF02HJ* REF02HZ* REF02J* REF02Z* TEMP RANGE -55C to +125C -55C to +125C 0C to +70C 0C to +70C 0C to +70C 0C to +70C 0C to +70C 0C to +70C 0C to +70C -55C to +125C -55C to +125C -55C to +125C -55C to +125C 0C to +70C 0C to +70C 0C to +70C 0C to +70C 0C to +70C 0C to +70C 0C to +70C 0C to +70C 0C to +70C -55C to +125C -55C to +125C MAX TEMPCO 8.5 8.5 65 65 65 8.5 8.5 25 25 25 25 8.5 8.5 65 65 250 250 250 8.5 8.5 25 25 25 25 INITIAL ERROR 30 15 100 100 100 30 30 50 50 50 50 15 15 50 50 100 100 100 15 15 25 25 25 25 PIN-PACKAGE 8 TO-99 8 Hermetic DIP 8 TO-99 8 Plastic DIP 8 CERDIP 8 TO-99 8 CERDIP 8 TO-99 8 Hermetic DIP 8 TO-99 8 CERDIP 8 TO-99 8 Hermetic DIP 8 CERDIP 8 TO-99 8 Plastic DIP 8 SO 8 TO-99 8 CERDIP 8 TO-99 8 Hermetic DIP 8 TO-99 8 CERDIP 8 TO-99
*Not recommended for new designs. Contact factory for availability.
Pin Configurations
TOP VIEW
N.C. 1 N.C. 8 7 N.C. N.C. 1 VIN 2 VIN 2 8 7 N.C. N.C. VOUT TRIM N.C. 1 VIN 2 N.C./TEMP* 3 8 7 N.C. N.C. VOUT TRIM
REF01/ REF02
3 4 GROUND (CASE) 5
6 VOUT N.C./TEMP* TRIM 3
REF01/ REF02
6 5
REF01/ REF02
6 5
ww..com
N.C./TEMP*
GND 4
GDN 4
DIP
SO
TO-99 METAL CAN
*NOTE: PIN 3 IS N.C. (NO CONNECTION) ON REF01, TEMP OUTPUT ON REF02.
Package Information
For the latest package outline information, go to www.maxim-ic.com/packages.
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 _____________________ 9 (c) 2003 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products.
www..com
www..com www..com 4U
DataSheet 4 U .com
www..com
REF01/REF02

▲Up To Search▲

Price & Availability of REF01

	To Download REF01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .