View HMJ1-PCB_331682.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HMJ1
High Dynamic Range FET Mixer Product Information
Product Features
* +39 dBm IIP3 * No external matching element Required * RF 750 - 1000 MHz * LO 680 - 980 MHz * IF 20 - 100 MHz * +17 dBm LO Drive Level * +3V at 23mA DC Power Supply * Low Cost Surface Mount J-Lead Package
Product Description
The HMJ1 is a high dynamic range GaAs FET mixer. This active FET mixer realizes a typical third order intercept point of +39 dBm at an LO drive level of +17 dBm. The HMJ1 comes in a low cost, J-Lead package. Typical applications include frequency up/down conversion, modulation and demodulation for transmitters and receivers used in communications systems.
Functional Diagram
RF
LO
+3Vdc IF
Function IF LO RF +3V Ground
Pin No. 2 11 17 8 All other pins
Specifications (1,2)
Parameter
RF Frequency Range LO Frequency Range IF Frequency Range SSB Conversion Loss Noise Figure LO-RF Isolation LO-IF Isolation RF-IF Isolation Input IP3 RF Return Loss LO Return Loss IF Return Loss Input P1dB LO Drive Level DC Current at +3V Bias
Units
MHz MHz MHz dB dB dB dB dB dBm dB dB dB dBm dBm mA
Min
Typ
750 - 1000 680 - 980 20 - 100 7.7 9.2 29 40 24 39 8 13 19 +23 +17 23
Max
Condition
9.3
20 30 33
RF = 900 MHz @ 0 dBm
35
Notes: 1. Test conditions unless otherwise noted: 25 C, RF = 900 MHz @ -10 dBm, LO = 830 MHz @ +17 dBm, IF = 70 MHz. 2. Measured in a 50-Ohm system with nominal LO drive in a downconverter application only, unless otherwise specified.
Absolute Maximum Rating
Parameters
Operating Case Temperature Storage Temperature Maximum Input Power
Ordering Information
Part No.
HMJ1
Rating
-40 to +85 C -55 to +120 C +25 dBm
Description
High Dynamic Range FET Mixer
Operation of this device above any of these parameters may cause permanent damage. Total sum of LO port and RF port power should not exceed +25 dBm. Specifications and information are subject to change without notice TriQuint Semiconductor, Inc * Phone 1-800-WJ1-4401 * FAX: 408-577-6633 * e-mail: info-sales@tqs.com * Web site: www. TriQuint.com January 2009
HMJ1
High Dynamic Range FET Mixer Product Information
Typical Performance Data
Specifications and information are subject to change without notice TriQuint Semiconductor, Inc * Phone 1-800-WJ1-4401 * FAX: 408-577-6633 * e-mail: info-sales@tqs.com * Web site: www. TriQuint.com January 2009
HMJ1
High Dynamic Range FET Mixer Product Information
Outline Drawing
Product Marking
The component will be marked with an "HMJ7" designator with a four-digit alphanumeric lot number XXXX. Tape and reel specifications for this part are located on the website in the "Application Notes" section.
ESD Information
ESD Rating: Value: Test: Standard: ESD Rating: Value: Test: Standard: Class 2 Passes at 2000 V Human Body Model (HBM) JEDEC Standard JESD22-A114 Class IV Passes at 2000 V Charged Device Model (CDM) JEDEC Standard JESD22-C101
Dimensions are expressed in Inches. TOLERANCE .XXX [ .015 .XX [ .02 Drawing is illustrated at Max dimensions.
Mounting Config. Notes Land Pattern / Mounting Configuration
1. Ground vias are critical for thermal and RF grounding considerations. 2. A minimum of 36 ground vias are required for 14 mil FR4 boards. 3. If your PCB design rules allow, ground vias should be placed under the land pattern for better RF and thermal performance. Otherwise ground vias should be placed as close to the land pattern as possible. 4. Trace width depends on the PCB material.
Specifications and information are subject to change without notice TriQuint Semiconductor, Inc * Phone 1-800-WJ1-4401 * FAX: 408-577-6633 * e-mail: info-sales@tqs.com * Web site: www. TriQuint.com January 2009

▲Up To Search▲

Price & Availability of HMJ1-PCB

	To Download HMJ1-PCB Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .