Part Number Hot Search : 
AX5621 TISP3082 BF337 FMS6363 TLRE180 MAS8340 MS13BFW 78LR05DL
Product Description
Full Text Search
 

To Download OVLFB3C7 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Round Blue Through-hole LED Lamp (5 mm)
OVLFB3C7
x x x High brightness with well-defined spatial radiation patterns UV-resistant epoxy lens Blue (470 nm) Product Photo Here
The OVLFB3C7 is a high-intensity InGaN LED mounted in a clear plastic T-13/4 package. Its UV-resistant epoxy lens makes this device an optimal solution for outdoor applications. This LED provides a well-defined and even emission pattern. Applications x Traffic and pedestrian signals x Signage and architectural lighting x Backlighting x Automotive Part Number OVLFB3C7 Material InGaN Emitted Color Blue Intensity Typ. mcd 1350 Lens Color Water Clear
RoHS
Moisture
DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A 10/05 Page 1 of 4
Round Blue Through-hole LED (5 mm)
OVLFB3C7 Absolute Maximum Ratings
TA = 25oC unless otherwise noted
Storage Temperature Range Operating Temperature Range Reverse Voltage Continuous Forward Current Power Dissipation Lead Soldering Temperature (3mm from the base of the epoxy bulb) Current Linearity vs. Ambient Temperature LED Junction Temperature
Notes: 1. Solder time less than 5 seconds at temperature extreme. 2. Design of Heat Dissipation should be considered.
1 2
-40 ~ +100 C -40 ~ +85 C 5V 20 mA 50 mA 100 mW 260 C -0.2 mA/ C 125 C
Peak Forward Current (10% Duty Cycle, 1KHz)
Electrical Characteristics
TA = 25oC unless otherwise noted
SYMBOL Iv VF IR
P D
PARAMETER Luminous Intensity Forward Voltage Reverse Current Peak Wavelength Dominant Wavelength Spectra Half Width
MIN 810 -------------------
TYP 1350 3.4 ---466 470 25 30
MAX ---4.0 50 -------------
UNITS
CONDITIONS IF = 20 mA IF = 20 mA VR = 5 V IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA
mcd
V A nm nm nm deg
21/2
50% Power Angle
Lamps are sorted to luminous intensity (IV) and dominant wavelength ( D) bins shown. Orders for OVLFB3C7 may be filled with any or all bins contained as below. Luminous Intensity (mcd)
Standard Bins (IF = 20mA)
1590-2225 1135-1590 810-1135
T S R Luminous intensity is at R bin or above.
Dominant Wavelength (470 nm)
Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. To designate luminous intensity ranks, please contact OPTEK. 3. Pb content <1000 PPM.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 10/05 Page 2 of 4 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Round Blue Through-hole LED (5 mm)
OVLFB3C7 Typical Electro-Optical Characteristics Curves
mA
%
V
mA
Forward Current vs Forward Voltage
Relative Luminous Intensity vs Forward Current
V
A
mA
C
Reverse Current vs Reverse Voltage
Forward Current vs Ambient Temperature
%
Relative Luminous Intensity vs Ambient Temperature
C
100%
Beam Pattern
IV
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 10/05 Page 3 of 4
Round Blue Through-hole LED (5 mm)
OVLFB3C7 Packing Information: Available in bulk or reel
Bulk: 500 pcs/bag
13-Inch Reel: 1000 pcs/reel
Carrier Tape Dimensions: Loaded quantity 1000 pieces per reel
Moisture Resistant Packaging
Label
Aluminum Moisture-proof Bag
Desiccant
Bar Code Label
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 10/05 Page 4 of 4 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com


▲Up To Search▲   

 
Price & Availability of OVLFB3C7

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X