CORED SOLDER WIRES FOR ALUMINIUM
ALU-SOL
q q q q q q q q Easier and more reliable soldering of aluminium and aluminium alloys Greatly improved resistance to electrolytic corrosion (Tin/Zinc solder is poor in comparison) Excellent flow on aluminium, most aluminium alloys and other metals. Good penetration Contains 4 cores of unique flux. No separate flux required Compatible with standard solders Solders virtually all other metals including stainless steel Range of alloys possible with various melting temperatures Flux permits direct flame heating at soldering point. Gas heated iron also suitable. Thinner gauge sheet and wires solderable directly with electric soldering iron, hot plate, oven, induction, infra-red and resistance heating (R)
This data is based on information believed to be reliable and is offered in good faith, but MULTICORE MAKES NO WARRANTIES EITHER EXPRESS OR IMPLIED AS TO ITS ACCURACY AND ASSUMES NO LIABILITIES ARISING OUT OF ITS USE BY OTHERS as conditions and methods of use of the products are beyond MULTICORE'S control. The prospective user should determine the suitability of the product before using it on a commercial scale. MULTICORE warrants only that the product will conform to its physical descriptions. MULTICORE MAKES NO OTHER WARRANTIES EXPRESS OR IMPLIED AND EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MULTICORE BE RESPONSIBLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, WHETHER THE CLAIM IS IN CONTRACT, NEGLIGENCE OR OTHERWISE.
MSL Ref: 544 7/99
|
