 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Remote Control and Security Systems Hybrids - ver.8 Web Site : http://www.telecontrolli.com Page RR1-XXX RR3-XXX RR4-XXX RR6-XXX RR8-XXX RR10-XXX RR11-XXX RR13-868.35 RR15-XXX RRS1-XXX RRS2-XXX RRS3-XXX RRQ1-XXX RRF1-XXX RT1-XXX RT2-XXX RT4-XXX RT5-XXX RT6-XXX RT8-868.35 RTQ1-XXX RTF2-XXX RTF3-XXX UTR1 UTR2 UTR3 PID1 IRT1 IRD1 Super Regen Radio Receiver Super Regen Radio Receiver - Laser Trimmed Inductor Super Regen RX - Laser Trimmed Inductor - Cascode Input Very Low Consumption Super Regen RX - Laser Trimmed Inductor 3V Supply Voltage - Very Low Consumption Super Regen RX Narrow Bandwidth Super Regen RX - Laser Trimmed Inductor Very Low Consumption Super Regen RX - Laser Trimmed Inductor 868.350 MHz Super Regen RX - Laser Trimmed Capacitor Super Regen RX - Front End SAW Filter - Shielded AM Superhet Receiver - SAW Front End Filter AM Superhet Receiver AM Superhet Receiver - PreAmp Front End Filter AM Superhet Receiver with Crystal Oscillator - 433.92 / 868.35 MHz FSK Superhet Receiver AM Radio Transmitter Module - Integrated Antenna AM Radio Transmitter with SAW Resonator - Integrated Antenna AM Radio Transmitter with SAW Resonator - External Antenna AM Radio Transmitter with SAW Resonator - External Antenna AM Radio Transmitter with SAW Resonator - External Antenna 868.350 MHz Radio Transmitter with SAW Resonator - External Antenna AM Radio Transmitter with Crystal Oscillator - 433.92 / 868.35 MHz FSK Radio Transmitter with SAW Resonator - External Antenna FSK Radio Transmitter with SAW Resonator - External Antenna Ultrasonic Transmitter / Receiver Ultrasonic Transmitter / Receiver Ultrasonic Transmitter / Receiver Passive Infrared Detector Infrared Pulse Transmitter Infrared Pulse Detector HEAD OFFICE AND PLANT Via Naz. delle Puglie 177 80026 Casoria (NA), Italy Tel : +39 081 7599033 Fax : +39 081 7596494 customer.service.tc@ipmgroup.com SALES OFFICE Via Pirelli 32 20124 Milano, Italy Tel : +39 02 6711681 Fax : +39 02 671168228 telecontrolli.mi@ipmgroup.com 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 Radio Receiver telecontrolli RR1-XXX Fixed Frequency Super Regenerative Radio Receiver General description The RR1-XXX is a super regenerative data receiver. Sensitivity typically exceedes -100dBm (2.2uVrms) when matched to 50 ohm. The tuning frequency can be custom-specified in the range 200 to 450 MHz. It shows stable electrical characteristics thanks to "Thick film hybrid" technology. XXX: custom-specified working frequency (200 / 450 MHz) Standard European and U.S. frequencies (315MHz, 418MHz, 433.92MHz) are readly available from stock. Applications * * * * Home security systems Car Alarm systems Remote gate controls Sensor reporting BLOCK DIAGRAM VRF In RF Pre-Amp RF Oscillator LP Filter AM Ampli VAF Comparator OUT GND RF Quench Oscillator GND AF Test Point GND AF Electrical Characteristics CHARACTERISTICS VRF VAF IS FW BW RF Supply Voltage AF Supply Voltage Supply Current Working Frequency Tuning Tolerance -3dB Bandwidth Max Data Rate RF Sensitivity (100% AM) Level of Emitted Spectrum Vol Voh TOP Low-Level Output Voltage High-Level Output Voltage Operating Temperature Range 3.6 -25 -100 -105 -65 200 0.5 2 Ta = 25C unless otherwise specified MIN 4.5 4.5 TYP 5 5 2.5 MAX 5.5 5.5 3.5 450 UNIT VDC VDC mA MHz MHz 3 2 MHz KHz dBm -60 0.6 +80 dBm V V C Pin Description 1 2 3 4 5 6 7 8 RF +VCC RF GND IN NC NC NC RF GND NC 9 10 11 12 13 14 15 NC AF +VCC AF GND AF +VCC Test Point OUT AF +VCC Mechanical Dimensions 38.1mm Components Side 12 7 10 15 12.7mm 1mm 2.54mm TYPICAL APPLICATION AERIAL 12 RR1-XXX 7 10 15 DECODER IN OUT +5V telecontrolli HEAD OFFICE & PLANT Via Naz. delle Puglie 177 80026 Casoria (NA), Italy Tel: +39 081 7599033 Fax: +39 081 7596494 Radio Receiver telecontrolli RR3-XXX Super Regenerative Radio Receiver With Laser Trimmed Inductor General description The RR3-XXX is a super regenerative data receiver. Sensitivity typically exceedes -100dBm (2.2uVrms) when matched to 50 ohm. It shows high frequency stability also in presence of mechanical vibrations, manual handling and in a wide range of temperature. The frequency accuracy is very high thanks to laser trimming process. PATENTED. I-ETS 300-220 Compliance (RR3-418, RR3-433.92) FCC 15/C Compliance (RR3-315) XXX: custom-specified working frequency (200 / 450 MHz) Standard European and U.S. frequencies (315MHz, 418MHz, 433.92MHz) are readly available from stock. Applications * * * * Home security systems Car Alarm systems Remote gate controls Sensor reporting BLOCK DIAGRAM VRF In RF Pre-Amp RF Oscillator LP Filter AM Ampli VAF Comparator OUT GND RF Quench Oscillator GND AF Test Point GND AF Electrical Characteristics CHARACTERISTICS VRF VAF IS FW BW RF Supply Voltage AF Supply Voltage Supply Current Working Frequency Tuning Tolerance -3dB Bandwidth Max Data Rate RF Sensitivity (100% AM) Level of Emitted Spectrum Vol Voh TOP Low-Level Output Voltage High-Level Output Voltage Operating Temperature Range 3.6 -25 -100 -105 -65 200 0.2 2 Ta = 25C unless otherwise specified MIN 4.5 4.5 TYP 5 5 2.5 MAX 5.5 5.5 3 450 0.5 3 2 UNIT VDC VDC mA MHz MHz MHz KHz dBm -60 0.6 +80 dBm V V C Pin Description 1 2 3 4 5 6 7 8 RF +VCC RF GND IN NC NC NC RF GND NC 9 10 11 12 13 14 15 NC AF +VCC AF GND AF +VCC Test Point OUT AF +VCC Mechanical Dimensions 38.1mm Components Side 12 7 10 15 12.7mm 1mm 2.54mm TYPICAL APPLICATION AERIAL 12 RR3-XXX 7 10 15 DECODER IN OUT +5V telecontrolli HEAD OFFICE & PLANT Via Naz. delle Puglie 177 80026 Casoria (NA), Italy Tel: +39 081 7599033 Fax: +39 081 7596494 Radio Receiver telecontrolli RR4-XXX Super Regenerative Radio Receiver With Laser Trimmed Inductor and Cascode Input Stage General description The RR4-XXX is a super regenerative data receiver. Sensitivity typically exceedes -100dBm (2.2uVrms) when matched to 50 ohm. Emission level: -70 dBm typ (Cascode Input) -3dB Bandwith: +/-1.5 MHz typ It shows high frequency stability also in presence of mechanical vibrations, manual handling and in a wide range of temperature. The frequency accuracy is very high thanks to laser trimming process. PATENTED. I-ETS 300 220 Compliance (RR4-433.92) XXX: custom-specified working frequency (200 / 450 MHz) Standard European and U.S. frequencies (315MHz, 418MHz, 433.92MHz) are readly available from stock. Applications * * * * Home security systems Car Alarm systems Remote gate controls Sensor reporting BLOCK DIAGRAM VRF In Cascode Pre-Amp RF Oscillator LP Filter AM Ampli VAF Comparator OUT GND RF Quench Oscillator GND AF Test Point GND AF Electrical Characteristics CHARACTERISTICS VRF VAF IS FW BW RF Supply Voltage AF Supply Voltage Supply Current Working Frequency Tuning Tolerance -3dB Bandwidth Max Data Rate RF Sensitivity (100% AM) Level of Emitted Spectrum Vol Voh TOP Low-Level Output Voltage High-Level Output Voltage Operating Temperature Range 3.6 -25 -100 -105 -70 200 0.2 1.5 Ta = 25C unless otherwise specified MIN 4.5 4.5 TYP 5 5 2.5 MAX 5.5 5.5 3 450 0.5 2 2 UNIT VDC VDC mA MHz MHz MHz KHz dBm -65 0.6 +80 dBm V V C Pin Description 1 2 3 4 5 6 7 8 RF +VCC RF GND IN NC NC NC RF GND NC 9 10 11 12 13 14 15 NC NC AF GND AF +VCC Test Point OUT AF +VCC Mechanical Dimensions 38.1mm Components Side 12 7 11 15 12.7mm 1mm 2.54mm TYPICAL APPLICATION AERIAL 12 RR4-XXX 7 11 15 DECODER IN OUT +5V telecontrolli HEAD OFFICE & PLANT Via Naz. delle Puglie 177 80026 Casoria (NA), Italy Tel: +39 081 7599033 Fax: +39 081 7596494 Radio Receiver telecontrolli RR6-XXX Very Low Consumption Super Regenerative Radio Receiver - Fast Turn-On Time General description The RR6-XXX is a super regenerative data receiver. Sensitivity typically exceedes -95dBm when matched to 50 ohm. Typical current consumption is 0.5 mA. Low Turn-on Time (150 msec). It shows high frequency stability also in presence of mechanical vibrations, manual handling and in a wide range of temperature. The frequency accuracy is very high thanks to laser trimming process. PATENTED. XXX: custom-specified working frequency (200 / 450 MHz) Standard European and U.S. frequencies (315MHz, 418MHz, 433.92MHz) are readly available from stock. Applications * * * * Home security systems Car Alarm systems Remote gate controls Sensor reporting BLOCK DIAGRAM VRF In RF Pre-Amp RF Oscillator LP Filter AM Ampli VAF Comparator OUT GND RF Quench Oscillator GND AF Test Point GND AF Electrical Characteristics CHARACTERISTICS VRF ,VAF IS FW BW Supply Voltage Supply Current Working Frequency Tuning Tolerance -3dB Bandwidth Max Data Rate RF Sensitivity (100% AM) Level of Emitted Spectrum TON Vol Voh TOP Turn-on Time Low-Level Output Voltage High-Level Output Voltage Operating Temperature Range 3.6 -25 -95 -65 100 280 0.2 2 Ta = 25C unless otherwise specified MIN 4.5 TYP 5 0.5 MAX 5.5 UNIT VDC mA 450 0.5 3 2 MHz MHz MHz KHz dBm -60 150 0.6 +80 dBm msec V V C Pin Description 1 2 3 4 5 6 7 8 RF +VCC RF GND IN NC NC NC RF GND NC 9 10 11 12 13 14 15 NC AF +VCC AF GND AF +VCC Test Point OUT AF +VCC Mechanical Dimensions 38.1mm Components Side 12 7 10 15 12.7mm 1mm 2.54mm TYPICAL APPLICATION AERIAL 12 RR6-XXX 7 10 15 DECODER IN OUT +5V telecontrolli HEAD OFFICE & PLANT Via Naz. delle Puglie 177 80026 Casoria (NA), Italy Tel: +39 081 7599033 Fax: +39 081 7596494 Radio Receiver telecontrolli RR8-XXX 3V Supply Voltage - Very Low Consumption Super Regenerative Radio Receiver General description The RR8-XXX is a super regenerative data receiver. Sensitivity typically exceedes -90dBm when matched to 50 ohm. Typical current consumption is 0.5 mA. Low Turn-on Time (150 msec). It shows high frequency stability also in presence of mechanical vibrations, manual handling and in a wide range of temperature. The frequency accuracy is very high thanks to laser trimming process. PATENTED. XXX: custom-specified working frequency (200 / 450 MHz) Standard European and U.S. frequencies (315MHz, 418MHz, 433.92MHz) are readly available from stock. Applications * * * * * Battery powered portable devices Home security systems Car Alarm systems Remote gate controls Sensor reporting BLOCK DIAGRAM VRF In RF Pre-Amp RF Oscillator LP Filter AM Ampli VAF Comparator OUT GND RF Quench Oscillator GND AF Test Point GND AF Electrical Characteristics CHARACTERISTICS VRF ,VAF IS FW BW Supply Voltage Supply Current Working Frequency Tuning Tolerance -3dB Bandwidth Max Data Rate RF Sensitivity (100% AM) Level of Emitted Spectrum TON TOP Turn-on Time Operating Temperature Range -25 -90 -65 150 280 0.2 2 Ta = 25C unless otherwise specified MIN 2.7 TYP 3 0.5 MAX 3.3 UNIT VDC mA 450 0.5 3 2 MHz MHz MHz KHz dBm -60 dBm msec +80 C Pin Description 1 2 3 4 5 6 7 8 RF +VCC RF GND IN NC NC NC RF GND NC 9 10 11 12 13 14 15 NC NC AF GND AF +VCC Test Point OUT AF +VCC Mechanical Dimensions 38.1mm Components Side 12 7 11 15 12.7mm 1mm 2.54mm TYPICAL APPLICATION AERIAL 12 RR8-XXX 7 11 15 DECODER IN OUT +3V telecontrolli HEAD OFFICE & PLANT Via Naz. delle Puglie, 177 80026 CASORIA (NA), Italy Tel: +39 081 7599033 Fax: +39 081 7596494 Radio Receiver telecontrolli RR10-XXX Narrow Bandwidth Super Regenerative Radio Receiver - Laser Trimmed Inductor General description The RR10-XXX is a super regenerative data receiver. Sensitivity typically exceedes -100dBm (2.2uVrms) when matched to 50 ohm. Narrow Bandwidth: -3dB +/-1.5MHz -30dB +/- 5MHz -50dB +/- 7MHz The frequency accuracy is very high thanks to laser trimming process. PATENTED. I-ETS 300-220 Compliance XXX: custom-specified working frequency (200 / 450 MHz) Standard European and U.S. frequencies (315MHz, 418MHz, 433.92MHz) are readly available from stock. Applications * * * * Home security systems Car Alarm systems Remote gate controls Sensor reporting BLOCK DIAGRAM VRF In RF Pre-Amp RF Oscillator LP Filter AM Ampli VAF Comparator OUT GND RF Quench Oscillator GND AF Test Point GND AF Electrical Characteristics CHARACTERISTICS VRF VAF IS FW BW RF Supply Voltage AF Supply Voltage Supply Current Working Frequency Tuning Tolerance -3dB Bandwidth Max Data Rate RF Sensitivity (100% AM) Level of Emitted Spectrum Vol Voh TOP Low-Level Output Voltage High-Level Output Voltage Operating Temperature Range 3.6 -25 -100 -102 -65 200 +/-0.2 +/-1.5 Ta = 25C unless otherwise specified MIN 4.5 4.5 TYP 5 5 1.2 MAX 5.5 5.5 1.5 450 +/-0.5 +/-2 2 UNIT VDC VDC mA MHz MHz MHz KHz dBm -60 0.6 +80 dBm V V C Pin Description 1 2 3 4 5 6 7 8 RF +VCC RF GND IN NC NC NC RF GND NC 9 10 11 12 13 14 15 NC AF +VCC AF GND AF +VCC Test Point OUT AF +VCC Mechanical Dimensions 38.1mm Components Side 12 7 10 15 12.7mm 1mm 2.54mm TYPICAL APPLICATION AERIAL 12 RR10-XXX 7 10 15 DECODER IN OUT +5V telecontrolli HEAD OFFICE & PLANT Via Naz. delle Puglie, 177 80026 CASORIA (NA), Italy Tel: +39 081 7599033 Fax: +39 081 7596494 Radio Receiver telecontrolli RR11-XXX Very Low Consumption Super Regenerative Radio Receiver - Fast Turn-On Time General description The RR11-XXX is a super regenerative data receiver. Sensitivity typically exceedes -95dBm when matched to 50 ohm. Typical current consumption is 300 uA. Low Turn-on Time (150 msec). It shows high frequency stability also in presence of mechanical vibrations, manual handling and in a wide range of temperature. The frequency accuracy is very high thanks to laser trimming process. PATENTED. XXX: custom-specified working frequency (200 / 450 MHz) Standard European and U.S. frequencies (315MHz, 418MHz, 433.92MHz) are readly available from stock. Applications * * * * Home security systems Car Alarm systems Remote gate controls Sensor reporting BLOCK DIAGRAM VRF In RF Pre-Amp RF Oscillator LP Filter AM Ampli VAF Comparator OUT GND RF Quench Oscillator GND AF Test Point GND AF Electrical Characteristics CHARACTERISTICS VRF ,VAF IS FW BW Supply Voltage Supply Current Working Frequency Tuning Tolerance -3dB Bandwidth Max Data Rate RF Sensitivity (100% AM) Level of Emitted Spectrum TON Vol Voh TOP Turn-on Time Low-Level Output Voltage High-Level Output Voltage Operating Temperature Range 3.6 -25 -95 -65 100 280 0.2 2 Ta = 25C unless otherwise specified MIN 4.5 TYP 5 300 MAX 5.5 UNIT VDC uA 450 0.5 3 2 MHz MHz MHz KHz dBm -60 150 0.6 +80 dBm msec V V C Pin Description 1 2 3 4 5 6 7 8 RF +VCC RF GND IN NC NC NC RF GND NC 9 10 11 12 13 14 15 NC AF +VCC AF GND AF +VCC Test Point OUT AF +VCC Mechanical Dimensions 38.1mm Components Side 12 7 10 15 12.7mm 1mm 2.54mm TYPICAL APPLICATION AERIAL 12 RR11-XXX 7 10 15 DECODER IN OUT +5V telecontrolli HEAD OFFICE & PLANT Via Naz. delle Puglie 177 80026 Casoria (NA), Italy Tel: +39 081 7599033 Fax: +39 081 7596494 Radio Receiver telecontrolli RR13-868.35 868.350 MHz Super Regenerative Radio Receiver With Laser Trimmed Capacitor General description The RR13 is a super regenerative UHF radio receiver with minimum power consumption and good sensitiity. The RR13 is ideally designed to a variety of remote alarm, control or monitoring battery opearted applications. The frequency accuracy is very high thanks to laser trimming process. Typical Sensitivity: -90dBm Current consumption: 500uA Applications * * * * Home security systems Car Alarm systems Remote gate controls Sensor reporting BLOCK DIAGRAM VS In RF Pre-Amp RF Oscillator LP Filter AM Ampli VS Comparator OUT GND Quench Oscillator GND Test Point GND Electrical Characteristics CHARACTERISTICS VS IS FW BW Supply Voltage Supply Current Receiver Frequency Tuning Tolerance -3dB Bandwidth Data Rate RF Sensitivity (100% AM) Start-Up Time Conducted Spurious Emissions Vol Voh TOP Low-Level Output Voltage High-Level Output Voltage Operating Temperature Range 3.5 -25 50 -90 100 Ta = 25C unless otherwise specified MIN 4.5 TYP 5 500 868.350 0.2 2 MAX 5.5 UNIT VDC uA MHz 0.5 MHz MHz 4800 bit/sec dBm msec -60 0.25 +80 dBm V V C Pin Description 3 4 11 12 13 14 15 IN GND GND NC Test Point Output +VCC Mechanical Dimensions 33.02mm Components Side 34 11 15 12.7mm 1mm 2.54mm TYPICAL APPLICATION AERIAL RR13 7 10 15 DECODER IN OUT +5V telecontrolli Web Site: http://www.telecontrolli.com HEAD OFFICE & PLANT Via Naz. delle Puglie, 177 80026 CASORIA (NA), Italy Tel: +39 081 7599033 Fax: +39 081 7596494 Radio Receiver telecontrolli RR15-XXX Super Regenerative Radio Receiver with Front End SAW Filter - Shielded General description The RR15-XXX is a super regenerative data receiver with a front end SAW filter to reduce RF Bandwidth. EMI immunity improved by a metal shield. Sensitivity typically exceedes -100dBm (2.2uVrms) when matched to 50 ohm. Narrow Bandwidth: +/- 250 KHz XXX: custom-specified working frequency Applications * * * * Home security systems Car Alarm systems Remote gate controls Sensor reporting BLOCK DIAGRAM VCC In SAW Filter RF Oscillator LP Filter AM Ampli VCC Comparator OUT GND Quench Oscillator GND Test Point GND 12 Electrical Characteristics CHARACTERISTICS VCC IS FW BW Supply Voltage Supply Current Working Frequency Tuning Tolerance -3dB Bandwidth Data Rate RF Sensitivity (100% AM) Level of Emitted Spectrum Vol Voh TOP Low-Level Output Voltage High-Level Output Voltage Operating Temperature Range 3.6 -25 -98 +/-250 4.8 -102 -75 Ta = 25C unless otherwise specified MIN 4.5 TYP 5 4.0 433.9 MAX 5.5 UNIT VDC mA MHz +/-75 +/-300 9.6 KHz KHz Kbit/s dBm -70 0.6 dBm V V +80 C Pin Description 1 2 3 7 11 NC GND IN GND GND 12 13 14 15 +VCC Test Point OUT +VCC Mechanical Dimensions 40.64mm 7mm 19.1mm 12 1mm 7 11 15 2.54mm TYPICAL APPLICATION AERIAL 12 RR15-XXX 7 10 15 DECODER IN OUT +5V telecontrolli HEAD OFFICE & PLANT Via Naz. delle Puglie, 177 80026 CASORIA (NA), Italy Tel: +39 081 7599033 Fax: +39 081 7596494 13 Superheterodyne Receiver telecontrolli RRS1-XXX AM Superhet Receiver With SAW Front End Filter General description The RRS1-XXX is an AM superhet data receiver with SAW front end filter. IF Frequency: 500KHz Typical sensitivity: -100dBm (2.2uVrms) Supply current: 3.7 mA (typ) I-ETS 300 220 Compliance Applications XXX: custom-specified working frequency (315, 418, 433.92 MHz) * * * * Wireless security systems Car Alarm systems Remote gate controls Sensor reporting BLOCK DIAGRAM VCC In SAW Filter MIXER IF Filter AM Demodulator VCC Comparator OUT GND Local Oscillator GND GND Electrical Characteristics CHARACTERISTICS VCC IS FR FIF Supply Voltage Supply Current Receiver Frequency IF Frequency Max Data Rate RF Sensitivity (100% AM)* Level of Emitted Spectrum Vol Voh TOP Low-Level Output Voltage (I=-10uA) VCC- 0.5 -25 -100 -65 Ta = 25C unless otherwise specified MIN 4.5 TYP 5 3.7 315/418/433.92 MAX 5.5 5 UNIT VDC mA MHz KHz KHz dBm 500 3 -60 0.6 dBm V V High-Level Output Voltage (I=200uA) Operating Temperature Range +80 C * Best Performances are obtained utilizing a transmitted coding with a DC average value indipendent of the data content (BiPhase Manchester coding) Pin Description 1 2 3 4 5 6 7 8 VCC GND IN NC NC NC GND NC 9 10 11 12 13 14 15 NC NC GND VCC NC OUT VCC Mechanical Dimensions 45.72mm Components Side 12 7 11 15 19.05mm 1mm 2.54mm TYPICAL APPLICATION AERIAL 12 RRS1-XXX 7 11 15 DECODER IN OUT +5V telecontrolli HEAD OFFICE & PLANT Via Naz. delle Puglie 177 80026 Casoria (NA), Italy Tel: +39 081 7599033 Fax: +39 081 7596494 Superheterodyne Receiver telecontrolli RRS2-XXX AM Superhet Receiver General description The RRS2-XXX is an AM superhet data receiver with LC Front End Filter. IF Frequency: 500KHz Typical sensitivity: -102dBm (1.8uVrms) Supply current: 3.7 mA (typ) Applications XXX: custom-specified working frequency (315, 418, 433.92 MHz) * * * * Wireless security systems Car Alarm systems Remote gate controls Sensor reporting BLOCK DIAGRAM VCC In LC Filter MIXER IF Filter AM Demodulator VCC Comparator OUT GND Local Oscillator GND GND Electrical Characteristics CHARACTERISTICS VCC IS FR FIF Supply Voltage Supply Current Receiver Frequency IF Frequency Max Data Rate RF Sensitivity (100% AM)* Level of Emitted Spectrum Vol Voh TOP Low-Level Output Voltage (I=-200uA) VCC- 0.5 -25 -102 -50 Ta = 25C unless otherwise specified MIN 4.5 TYP 5 3.7 315/418/433.92 MAX 5.5 5 UNIT VDC mA MHz KHz KHz dBm dBm V V 500 3 0.6 High-Level Output Voltage (I=10uA) Operating Temperature Range +80 C * Best Performances are obtained utilizing a transmitted coding with a DC average value indipendent of the data content (BiPhase Manchester coding) Pin Description 1 5 9 10 12 IN GND GND VCC OUT Mechanical Dimensions 30.48mm Components Side 1 5 9 10 12 20.32mm 1mm 2.54mm TYPICAL APPLICATION AERIAL 1 RRS2-XXX 5 9 10 12 DECODER IN OUT +5V telecontrolli HEAD OFFICE & PLANT Via Naz. delle Puglie 177 80026 Casoria (NA), Italy Tel: +39 081 7599033 Fax: +39 081 7596494 Superheterodyne Receiver telecontrolli RRS3-XXX AM Superhet Receiver With PreAmp Front End Filter General description The RRS3-XXX is an AM superhet data receiver with pre-Amplifier front end filter. IF Frequency: 500KHz Typical sensitivity: -106 dBm Supply current: 5 mA (typ) I-ETS 300-220 Compliance Applications XXX: custom-specified working frequency (315, 418, 433.92 MHz) * * * * Wireless security systems Car Alarm systems Remote gate controls Sensor reporting BLOCK DIAGRAM VCC In pre-Amp Filter MIXER IF Filter AM Demodulator VCC Comparator OUT GND Local Oscillator GND GND Electrical Characteristics CHARACTERISTICS VCC IS FR Bw Supply Voltage Supply Current Receiver Frequency RF Sensitivity (100% AM) -3dB Bandwidth Max Data Rate Level of Emitted Spectrum Vol Voh TOP Low-Level Output Voltage (I=-10uA) VCC- 0.5 -25 -70 Ta = 25C unless otherwise specified MIN 4.5 TYP 5 5 433.92 -106 400 MAX 5.5 6 UNIT VDC mA MHz dBm KHz 3 -65 0.6 KHz dBm V V High-Level Output Voltage (I=200uA) Operating Temperature Range +80 C Pin Description 1 2 3 4 5 6 7 8 VCC GND IN NC NC NC GND NC 9 10 11 12 13 14 15 NC NC GND NC NC OUT VCC Mechanical Dimensions 38.1mm Components Side 12 7 11 15 14.5mm 1mm 2.54mm TYPICAL APPLICATION AERIAL 12 RRS3-XXX 7 11 15 DECODER IN OUT +5V telecontrolli HEAD OFFICE & PLANT Via Naz. delle Puglie 177 80026 Casoria (NA), Italy Tel: +39 081 7599033 Fax: +39 081 7596494 Superheterodyne Receiver telecontrolli RRQ1-XXX AM Superhet Receiver 433.92 / 868.35 MHz With Crystal Oscillator General description The RRQ1-XXX is an AM superhet data receiver with PLL synthesizer and crystal oscillator. Receiver Frequency: 433.92MHz / 868.35MHz IF Frequency: 10.7MHz Typical sensitivity: -110 dBm Supply current: 5 mA (typ) Applications XXX: custom-specified working frequency ( 433.92, 868.35 MHz) * * * * Wireless security systems Car Alarm systems Remote gate controls Sensor reporting BLOCK DIAGRAM VCC In pre-Amp Filter MIXER 10.7MHz IF Filter VCC AM Demodulator Comparator OUT GND PLL Synthesizer GND GND Electrical Characteristics CHARACTERISTICS VCC IS FR Bw Supply Voltage Supply Current Receiver Frequency RF Sensitivity (100% AM) -3dB Bandwidth Max Data Rate Level of Emitted Spectrum Vol Voh TOP Low-Level Output Voltage (I=200uA) VCC- 1 -25 Ta = 25C unless otherwise specified MIN 4.5 TYP 5 5 433.9/868.35 -110/-104 200 MAX 5.5 6 UNIT VDC mA MHz dBm KHz 3 -70 0.6 KHz dBm V V High-Level Output Voltage (I=-200uA) Operating Temperature Range +80 C Pin Description 1 2 7 11 VCC GND GND GND 12 13 14 15 NC NC OUT PD (Power Down) Mechanical Dimensions 38.1mm Components Side 12 7 11 15 18.3mm PD = 0V ---> RX OFF (IStandby = 100nA max) PD = 5V ---> RX ON 1mm 2.54mm TYPICAL APPLICATION AERIAL 12 RRQ1-XXX 7 11 15 DECODER IN OUT +5V telecontrolli Web Site: http://www.telecontrolli.com HEAD OFFICE & PLANT Via Naz. delle Puglie, 177 80026 CASORIA (NA), Italy Tel: +39 081 7599033 Fax: +39 081 7596494 Superheterodyne Receiver telecontrolli RRF1-XXX-Y FSK Superhet Receiver General description The RRF1-XXX is an FSK superhet data receiver with pre-Amplifier front end filter. IF Frequency: 1 MHz Typical sensitivity: -90 dBm Supply current: 5.5 mA (typ) Up to 250 meters range with RTF2-XXX transmitter. I-ETS 300-220 Compliance XXX: custom-specified working frequency (315, 418, 433.92 MHz) Y: Bit rate specification A: 2.4Kbps B: 4.8Kbps Applications * * * * C: 9.6Kbps Wireless security systems Car Alarm systems Remote gate controls Sensor reporting BLOCK DIAGRAM VCC In pre-Amp Filter MIXER IF Filter FM Demodulator VCC Comparator OUT GND Local Oscillator GND GND Electrical Characteristics CHARACTERISTICS VCC IS Supply Voltage Supply Current RF Sensitivity A version: 2.4 Kbps B version: 4.8 Kbps C version: 9.6 Kbps Ta = 25C unless otherwise specified MIN 3.5 TYP 5 5.5 -94 -90 -87 25 400 -70 MAX 5.5 6 UNIT VDC mA dBm KHz KHz Frequency Deviation Bw Vol Voh TOP -3dB Bandwidth Level of Emitted Spectrum Low-Level Output Voltage (I=-10uA) VCC- 0.5 -25 -65 0.6 dBm V V High-Level Output Voltage (I=200uA) Operating Temperature Range +80 C Pin Description 1 2 3 7 11 VCC GND IN GND GND 12 13 14 15 NC NC OUT VCC Mechanical Dimensions 38.1mm Components Side 12 7 11 15 14.5mm 1mm 2.54mm TYPICAL APPLICATION AERIAL 12 RRF1-XXX 7 11 15 DECODER IN OUT +5V telecontrolli HEAD OFFICE & PLANT Via Naz. delle Puglie 177 80026 CASORIA (NA), Italy Tel: +39 081 7599033 Fax: +39 081 7596494 Radio Transmitter telecontrolli RT1-XXX Radio Transmitter Module (Integrated Antenna) General description The RT1-XXX is an hybrid circuit that allows to realize a complete radio transmitter adding a coding circuit. The Frequency accuracy is very high thanks to laser trimming process. PATENTED It shows stable electric characteristics thanks to the "Thick film hybrid" technology. XXX : working frequency (418, 433.92 MHz) Features * * * Applications * * * * Integrated Antenna High Reliability Laser Trimming Process Wireless security systems Car Alarm systems Remote gate controls Sensor reporting CIRCUIT SCHEMATIC VCC In Electrical Characteristics CHARACTERISTICS VCC IS FW Supply Voltage Supply Current Working Frequency Tuning Tolerance Max Data Rate TOP Operating Temperature Range -25 Ta = 25C unless otherwise specified MIN 9 TYP 3 418/433.92 0.2 MAX 14 UNIT VDC mA MHz 0.5 4 +80 MHz KHz C Pin Description Mechanical Dimensions 1 2 3 4 GND IN NC VCC Ground Modulation Input Not Connected Supply Voltage 19.0 mm 2 5.08 mm 1 7.6 mm 3 17.78 mm 4 TOP VIEW TYPICAL APPLICATION Led + 12V 1 2 3 4 5 6 7 8 16 Vcc M C 1 4 5 0 2 6 15 14 13 12 11 10 9 In RT1 GND telecontrolli HEAD OFFICE & PLANT Via Naz. delle Puglie 177 80026 Casoria (NA), Italy Tel: +39 081 7599033 Fax: +39 081 7596494 Radio Transmitter telecontrolli RT2-XXX Radio Transmitter Module with SAW Resonator (Integrated Antenna) General description The RT2-XXX is an hybrid circuit that allows to realize a complete radio transmitter adding a coding circuit. It shows stable electric characteristics thanks to the "Thick film hybrid" technology. XXX : working frequency (418, 433.92 MHz) I-ETS 300 220 Compliance (RT2-433.92) Features * * * Applications * * * * Integrated Antenna High Reliability DIL Package Wireless security systems Car Alarm systems Remote gate controls Sensor reporting CIRCUIT SCHEMATIC VCC In Electrical Characteristics CHARACTERISTICS VCC IS FW Supply Voltage Supply Current Working Frequency Max Data Rate TOP Operating Temperature Range Ta = 25C unless otherwise specified MIN 4 TYP 3 418/433.92 MAX 14 UNIT VDC mA MHz 4 KHz -40 +80 C Pin Description Mechanical Dimensions 1 2 3 4 VCC GND IN NC Supply Voltage Ground Modulation Input Not Connected 5.08 mm 17.78 mm 1 2 TOP VIEW 4 10.16 mm 3 TYPICAL APPLICATION Led + 12V 1 2 3 4 5 6 7 8 16 Vcc M C 1 4 5 0 2 6 15 14 13 12 11 10 9 In RT2 GND telecontrolli HEAD OFFICE & PLANT Via Naz. delle Puglie 177 80026 Casoria (NA), Italy Tel: +39 081 7599033 Fax: +39 081 7596494 Radio Transmitter telecontrolli RT4-XXX Radio Transmitter Module with SAW Resonator and External Antenna General description The RT4-XXX is an hybrid circuit that allows to realize a complete radio transmitter adding a coding circuit. It shows stable electric characteristics thanks to the "Thick film hybrid" technology. XXX : working frequency (315, 418, 433.92 MHz) I-ETS 300 220 Compliance (RT4-433.92-IETS) Features * * Applications * * * * High Reliability DIL Package Wireless security systems Car Alarm systems Remote gate controls Sensor reporting CIRCUIT SCHEMATIC VCC EA In Electrical Characteristics CHARACTERISTICS VCC IS FW PO VIH TOP Supply Voltage Supply Current (Vcc=5V IN=1KHz Square Wawe) Working Frequency RF Output Power into 50 (Vi=5V, Vcc=12V) Harmonic Spurious Emission Input High Voltage Max Data Rate Operating Temperature Range -25 2 303.8 7 -30 Ta = 25C unless otherwise specified MIN 2 TYP 4 MAX 14 UNIT VDC mA 433.92 10 VCC 4 +80 MHz dBm dBc V KHz C Tipically, equipment utilizing this device requires emissions testing and government approval, wich is the responsibility of the equipment manufacturer . Pin Description 1 2 3 4 VCC GND IN EA Supply Voltage Ground Modulation Input External Antenna Mechanical Dimensions 17.78 mm 1 5.08 mm TOP VIEW 4 10.16 mm 3 2 TYPICAL APPLICATION Led + 12V 1 2 3 4 5 6 7 8 16 Vcc M C 1 4 5 0 2 6 15 14 13 12 11 10 9 In RT4 GND EA telecontrolli HEAD OFFICE & PLANT Via Naz. delle Puglie 177 80026 Casoria (NA), Italy Tel: +39 081 7599033 Fax: +39 081 7596494 Radio Transmitter telecontrolli RT5-XXX Radio Transmitter Module with SAW Resonator and External Antenna General description The RT5-XXX is an hybrid circuit that allows to realize a complete radio transmitter adding a coding circuit. It shows stable electric characteristics thanks to the "Thick film hybrid" technology. XXX : working frequency (315, 418, 433.92 MHz) I-ETS 300 220 Compliance (RT4-433.92-IETS) Features * * Applications * * * * High Reliability SIL Package Wireless security systems Car Alarm systems Remote gate controls Sensor reporting CIRCUIT SCHEMATIC VCC EA In Electrical Characteristics CHARACTERISTICS VCC IS FW PO VIH TOP Supply Voltage Supply Current (Vcc=5V IN=1KHz Square Wawe) Working Frequency RF Output Power into 50 (Vi=5V, Vcc=12V) Harmonic Spurious Emission Input High Voltage Max Data Rate Operating Temperature Range -25 2 303.8 7 -35 Ta = 25C unless otherwise specified MIN 2 TYP 3 MAX 14 UNIT VDC mA 433.92 10 VCC 4 +80 MHz dBm dBc V KHz C Tipically, equipment utilizing this device requires emissions testing and government approval, wich is the responsibility of the equipment manufacturer . Pin Description 1 2 6 7 EA IN GND VCC External Antenna Modulation Input Ground Supply Voltage Mechanical Dimensions 17.78mm Components Side 12 67 11.43mm 1mm 2.54mm TYPICAL APPLICATION Led + 12V 1 2 3 4 5 6 7 8 16 Vcc M C 1 4 5 0 2 6 15 14 13 12 11 10 9 In RT5 GND EA telecontrolli HEAD OFFICE & PLANT Via Naz. delle Puglie 177 80026 Casoria (NA), Italy Tel: +39 081 7599033 Fax: +39 081 7596494 Radio Transmitter telecontrolli RT6-XXX Radio Transmitter Module with SAW Resonator and External Antenna General description The RT6-XXX is an hybrid circuit that allows to realize a complete radio transmitter adding a coding circuit. It shows stable electric characteristics thanks to the "Thick film hybrid" technology. XXX : working frequency (315, 418, 433.92 MHz) Features + + Applications + + + + High Reliability SIL Package Wireless security systems Car Alarm systems Remote gate controls Sensor reporting CIRCUIT SCHEMATIC Vcc In1 EA In2 Electrical Characteristics CHARACTERISTICS VCC IS FW PO Supply Voltage Supply Current (IN=1KHz Square Wawe) Working Frequency RF Output Power into 50 Harmonic Spurious Emission VIH TOP Input High Voltage Max Data Rate Operating Temperature Range -25 2.5 303.8 See Table -50 Ta = 25C unless otherwise specified MIN 2.7 TYP See Table MAX 14 UNIT VDC mA 433.92 MHz dBm dBc VCC 4 +80 V KHz C RF Output Power Vcc (V) 3/5 5/8 8 / 12 IN1 0 / Vcc NC 0/5 IN2 NC 0/5 NC Po (dBm) 3/8 7 / 10 12 / 15 Is (mA) 3/7 3/4 7/9 Mechanical Dimensions 38.1mm Components Side 12 11 15 12.2mm 1mm Pin description 1 2 3 GND IN1 IN2 4 GND 11 EA 13 GND 15 Vcc 2.54mm TYPICAL APPLICATION Led + 12V 1 2 3 4 5 6 7 8 16 Vcc M C 1 4 5 0 2 6 15 14 13 12 11 10 9 In RT6 GND EA telecontrolli HEAD OFFICE & PLANT Via Naz. delle Puglie 177 80026 Casoria (NA), Italy Tel: +39 081 7599033 Fax: +39 081 7596494 Radio Transmitter telecontrolli RT8-868.35 868.350 MHz Radio Transmitter Module with SAW Resonator and External Antenna General description The RT8 is a SAW stabilized ASK (OOK) transmitter. For a better stability and modulation it employs a two transistor design: an oscillator and a separate power amplifier. The RT8 is provided by a low-pass filter to attenuate the harmonic emissions. Applications + + + + Wireless security systems Car Alarm systems Remote gate controls Sensor reporting CIRCUIT SCHEMATIC Vcc RF OUTPUT Q1 Q2 LPF Mod. Input Electrical Characteristics CHARACTERISTICS VCC ICC FW Supply Voltage Supply Current (Vcc=5V IN=1KHz Square Wawe) Working Frequency Overall Frequency Accuracy PO RF Output Power into 50 Harmonic Spurious Emission Max Data Rate TOP Operating Temperature Range -25 (Vcc=5V) Ta = 25C unless otherwise specified MIN 4.0 TYP 12 868.350 MAX 13 UNIT VDC mA MHz 868.200 7 -35 868.500 10 9.6 +80 MHz dBm dBc Kbps C Pin description 2 3 4 Mod. Input NC GND 11 13 15 GND RF Output Vcc Mechanical Dimensions 35.6 mm Components Side 23 11 15 11.4 mm 1mm 2.54mm TYPICAL APPLICATION Led + 12V 1 2 3 4 5 6 7 8 16 Vcc M C 1 4 5 0 2 6 15 14 13 12 11 10 9 In RT8 GND EA telecontrolli Web Site: http://www.telecontrolli.com HEAD OFFICE & PLANT Via Naz. delle Puglie, 177 80026 CASORIA (NA), Italy Tel: +39 081 7599033 Fax: +39 081 7596494 Radio Transmitter telecontrolli RTQ1-XXX Radio Transmitter Module with crystal oscillator and External Antenna General description The RTQ1-XXX is an hybrid circuit that allows to realize a complete radio transmitter adding a coding circuit. It shows stable electric characteristics thanks to the "Thick film hybrid" technology. XXX : working frequency ( 433.92, 868.35 MHz) Features * * Applications * * * * High Reliability DIL Package Wireless security systems Car Alarm systems Remote gate controls Sensor reporting BLOCK DIAGRAM IN XTAL XTAL Oscillator PLL Synthesizer Power AMP OUT EN Electrical Characteristics CHARACTERISTICS VCC IS ISTANDBY FW PO VIH Supply Voltage Operating Supply Current Standby Supply Current (IN = EN = Low) Working Frequency RF Output Power into 50 (Vcc = 3.3V) Harmonic Spurious Emission Input High Voltage Max Data Rate Power-Up Time (EN full RF) TOP Operating Temperature Range -25 1.5 433.9/868.35 5 -40 Ta = 25C unless otherwise specified MIN 2.1 TYP 3.3 7 MAX 4 8 100 UNIT VDC mA nA MHz dBm dBc VCC 9.6 1 +80 V Kbps msec C Pin Description 1 2 3, 5 4 6 EN IN GND VCC EA Enable (active high) Modulation Input Ground Supply Voltage External Antenna Mechanical Dimensions 20.32 mm 1 5.08 mm 6 TOP VIEW 11.43 mm 5 4 2 3 TYPICAL APPLICATION + 3.3V 1 2 3 4 5 6 7 8 16 EN S C 4 1 3 4 2 15 14 13 12 11 10 9 Vcc EA In RTQ1 GND telecontrolli HEAD OFFICE & PLANT Via Naz. delle Puglie 177 80026 Casoria (NA), Italy Tel: +39 081 7599033 Fax: +39 081 7596494 Radio Transmitter telecontrolli RTF2-XXX FSK Radio Transmitter Module with SAW Resonator and External Antenna General description The RTF2-XXX is an hybrid circuit that allows to realize a complete FSK radio transmitter adding a coding circuit. It shows stable electric characteristics thanks to the "Thick film hybrid" technology. Up to 250 meters range with RRF1-XXX receiver. XXX: custom-specified working frequency (315, 418, 433.92 MHz) I-ETS 300-220 Compliance Features + + Applications + + + + High Reliability SIL Package Wireless security systems Car Alarm systems Remote gate controls Sensor reporting CIRCUIT SCHEMATIC Vcc EA In Electrical Characteristics CHARACTERISTICS VCC IS F PO Supply Voltage Supply Current Frequency Deviation RF Output Power into 50 Harmonic Spurious Emission VIH TOP Input High Voltage Max Data Rate Operating Temperature Range -25 2.5 Ta = 25C unless otherwise specified MIN 2.7 TYP 15 50 +7 -50 MAX 14 UNIT VDC mA KHz dBm dBc VCC 9.6 +80 V Kbps C Pin description 1 2 3 4 GND IN IN GND Mechanical Dimensions 38.1mm Components Side 12 11 15 12.7mm 11 EA 13 GND 15 Vcc 1mm 2.54mm TYPICAL APPLICATION Led + 12V 1 2 3 4 5 6 7 8 16 Vcc M C 1 4 5 0 2 6 15 14 13 12 11 10 9 In RTF2 GND EA telecontrolli HEAD OFFICE & PLANT Via Naz. delle Puglie 177 80026 CASORIA (NA), Italy Tel: +39 081 7599033 Fax: +39 081 7596494 Radio Transmitter telecontrolli RTF3-XXX FSK Radio Transmitter Module with SAW Resonator and External Antenna General description The RTF3-XXX is an hybrid circuit that allows to realize a complete FSK radio transmitter adding a coding circuit. It shows stable electric characteristics thanks to the "Thick film hybrid" technology. Up to 250 meters range with RRF1-XXX receiver. XXX: custom-specified working frequency (315, 418, 433.92 MHz) Features * * Applications * * * * High Reliability SIL Package Wireless security systems Car Alarm systems Remote gate controls Sensor reporting CIRCUIT SCHEMATIC Vcc EA In Electrical Characteristics CHARACTERISTICS VCC IS F PO VIH TOP Supply Voltage Supply Current (Vcc=5V IN=1KHz Square Wawe) Frequency Deviation RF Output Power into 50 Harmonic Spurious Emission Input High Voltage Max Data Rate Operating Temperature Range -25 2.5 (Vcc=5V) Ta = 25C unless otherwise specified MIN 2.7 TYP 8 50 7 -50 MAX 14 UNIT VDC mA KHz dBm dBc VCC 9.6 +80 V KHz C Pin Description 1 2 6 7 EA IN GND VCC External Antenna Modulation Input Ground Supply Voltage Mechanical Dimensions 22.86mm Components Side 12 67 11.43mm 1mm 2.54mm TYPICAL APPLICATION Led + 12V 1 2 3 4 5 6 7 8 16 Vcc M C 1 4 5 0 2 6 15 14 13 12 11 10 9 In RTF3 GND EA telecontrolli HEAD OFFICE & PLANT Via Naz. delle Puglie, 177 80026 CASORIA (NA), Italy Tel: +39 081 7599033 Fax: +39 081 7596494 Ultrasonic Transmitter / Receiver telecontrolli UTR1 Ultrasonic Transmitter / Receiver General description The UTR1 is an hybrid circuit that allows to realize an ultrasonic detector adding few external components. Detection is based on amplitude variation of received ultrasonic signal (40KHz) due to the movement of an object. It shows stable electric characteristics thanks to the "Thick film hybrid" tecnhology. Features * * Applications * * * High RFI Immunity SIL Package Car Alarm systems Residential and commercial security systems Automatic doors opening systems BLOCK DIAGRAM VCC 1 RES 6 D12 12 AD2 11 10 TRM2 8 TRM1 RXC 9 Ultrasonic Amplifier Subsonic Frequency Detector OUT1 3 AUX 4 OUT2 5 TXC 2 Ultrasonic Oscillator 40 KHz GND 7 Electrical Characteristics CHARACTERISTICS VCC IS G FU IO TOP Supply Voltage Supply Current Utrasonic Amplifier Gain Ultrasonic Frequency Out2 Sink Current Operating Temperature Range -20 38 Ta = 25C unless otherwise specified MIN 9 TYP 12 9 50 40 MAX 16 UNIT VDC mA dB 42 100 +80 KHz mA C Pin Description 1 2 3 4 5 6 7 8 9 10 11 12 VCC TXC OUT1 AUX OUT2 RES GND TRM1 RXC TRM2 AD2 D12 Supply Voltage Ultrasonic Piezoceramic Transmitter Output (TXCAP) Output Signal (OUT = "HIGH" if objet is moving) Auxiliary Output Signal Open Collector Output Pull-up Resistor Input Ground External Trimmer Ultrasonic Piezoceramic Receiver input (RXCAP) External Trimmer External Diode Anode External Diodes Common Point Mechanical Dimensions 48.3 mm Components Side 1 23 12 15.2 mm 1mm 8.9 mm 5.08 mm 2.54 mm TYPICAL APPLICATION 10K 100K + VCC 1 6 12 11 10 8 Sensitivity Control RX CAP 9 Ultrasonic Amplifier Subsonic Frequency Detector 3 4 5 TX CAP : MA40S3S Murata RX CAP : MA40S3R Murata TX CAP 2 Ultrasonic Oscillator 40 KHz UTR1 D1 -D2 : Germanium Diode 7 Component typical values telecontrolli HEAD OFFICE & PLANT Via Naz. delle Puglie 177 80026 Casoria (NA), Italy Tel: +39 081 7599033 Fax: +39 081 7596494 Ultrasonic Transmitter / Receiver telecontrolli UTR2 Ultrasonic Transmitter / Receiver General description The UTR2 is an hybrid circuit that allows to realize an ultrasonic detector adding few external components. Detection is based on amplitude variation of received ultrasonic signal (40KHz) due to the movement of an object. It shows stable electric characteristics thanks to the "Thick film hybrid" tecnhology. Features * * Applications * * * AC Input Amplifier with Automatic Gain Control Output Relay Driving with Ricirculation Diode Car Alarm systems Residential and commercial security systems Automatic doors opening systems BLOCK DIAGRAM Cext 2 TP1 6 3 TRM1 5 TRM2 8 VCC2 TP2 9 7 VCC3 11 VCC 10K RXC 1 AGC Ultrasonic Amplifier Subsonic Frequency Detector OUT 15 TXC 14 Ultrasonic Oscillator 40 KHz Low Frequency Oscillator DIL 12 1K LED 13 GND 4 Electrical Characteristics CHARACTERISTICS VCC IS G FU IO TOP Supply Voltage Supply Current Utrasonic Amplifier Gain Ultrasonic Frequency Out2 Sink Current Operating Temperature Range -20 38 Ta = 25C unless otherwise specified MIN 9 TYP 12 15 50 40 MAX 16 UNIT VDC mA dB 42 20 +80 KHz mA C Pin Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 RXC Cext TRM1 GND TRM2 TP1 VCC3 VCC2 TP2 INS VCC DIL LED TXC OUT Ultrasonic Piezoceramic Receiver Input (RXCAP) Supply Voltage External Capacitor External Trimmer Ground External Trimmer Test Point Supply Voltage of output stage Supply Voltage of internal stage Test Point Internal signal: not to be connect External Supply Voltage Disable signal LED control: active Low LED control signal Ultrasonic Piezoceramic Transmitter Output (TXCAP) OUT="LOW" if Objet is moving Mechanical Dimensions 38.1mm Components Side 12 15 15.24mm 1mm 2.54mm TYPICAL APPLICATION 100K 10uF + 10uF + 5.1V + VCC 2 6 3 5 8 9 7 11 RX CAP 1 AGC Ultrasonic Amplifier Subsonic Frequency Detector 15 TX CAP : MA40S3S Murata RX CAP : MA40S3R Murata TX CAP 14 Ultrasonic Oscillator 40 KHz UTR2 4 12 Low Frequency Oscillator 13 Component typical values telecontrolli HEAD OFFICE & PLANT Via Naz. delle Puglie 177 80026 Casoria (NA), Italy Tel: +39 081 7599033 Fax: +39 081 7596494 Ultrasonic Transmitter / Receiver telecontrolli UTR3 Ultrasonic Transmitter / Receiver General description The UTR3 is an hybrid circuit that allows to realize an ultrasonic detector adding few external components. Detection is based on amplitude variation of received ultrasonic signal (40KHz) due to the movement of an object. It shows stable electric characteristics thanks to the "Thick film hybrid" tecnhology. Features * Applications * * * AC Input Amplifier with Automatic Gain Control Car Alarm systems Residential and commercial security systems Automatic doors opening systems BLOCK DIAGRAM 2 Cext 6 TP 3 TRM1 5 TRM2 7 VCC1 VCC 11 RXC 1 AGC Ultrasonic Amplifier Subsonic Frequency Detector OUT 15 TXC 14 Ultrasonic Oscillator 40 KHz 4 GND Electrical Characteristics CHARACTERISTICS VCC VCC1 IS G FU IOL IOH TOP Supply Voltage Supply Voltage Supply Current Utrasonic Amplifier Gain Ultrasonic Frequency Out Sink Current (Vo = 0.4V) Out Source Current (Vo = 4.6V) Operating Temperature Range 38 0.5 0.5 -20 Ta = 25C unless otherwise specified MIN 9 4.5 TYP 12 5 10 50 40 1 1 MAX 16 5.5 UNIT VDC VDC mA dB 42 KHz mA mA +80 C Pin Description 1 2 3 4 5 6 7 11 14 15 RXC Cext TRM1 GND TRM2 TP VCC1 VCC TXC OUT Ultrasonic Piezoceramic Receiver Input (RXCAP) Supply Voltage External Capacitor External Trimmer Ground External Trimmer Test Point +5V Supply Voltage +12V Supply Voltage Ultrasonic Piezoceramic Transmitter Output (TXCAP) OUT="LOW" if Objet is moving Mechanical Dimensions 38.1mm Components Side 12 7 11 15 15.24mm 1mm 2.54mm TYPICAL APPLICATION 100K 10uF + + VCC1 2 6 3 5 7 + VCC RX CAP 11 AGC Ultrasonic Amplifier 1 Subsonic Frequency Detector 15 TX CAP : MA40S3S Murata RX CAP : MA40S3R Murata TX CAP 14 Ultrasonic Oscillator 40 KHz UTR3 Component typical values 4 telecontrolli HEAD OFFICE & PLANT Via Naz. delle Puglie 177 80026 Casoria (NA), Italy Tel: +39 081 7599033 Fax: +39 081 7596494 Infrared Devices telecontrolli PID1 Passive Infrared Detector General description The PID1 is an hybrid circuit that allows to realize a passive infrared detector adding few external components. Detection is based on infrared radiations emitted by human body. It shows stable electric characteristics thanks to the "Thick film hybrid" tecnhology. Features * * Applications * * High RFI Immunity SIL Package Residential and commercial security systems Automatic doors opening systems BLOCK DIAGRAM CAP4 6 CAP+ TRM1 7 8 TRM2 IRD 14 2 Subsonic Amplifier Detector Driver OUT 12 IN 3 Cext OUT1 Linear Regulator to internal circuit +5V 10 1K LED 11 VCC 16 VCC2 15 GND 1 VCC1 5-9-13 Electrical Characteristics CHARACTERISTICS VCC IS G BW IO TOP Supply Voltage Supply Current Amplifier Gain Amplifier Bandwidth Out2 Sink Current Operating Temperature Range -10 1 Ta = 25C unless otherwise specified MIN 9 TYP 12 5 70 MAX 16 UNIT VDC mA dB 10 20 +70 KHz mA C Pin Description 1 2 3 4 5-9-13 6 7 8 10 11 12 14 15 16 GND IN Cext CAPVcc1 CAP+ TRM1 TRM2 Out1 LED Out IRD Vcc2 Vcc Ground Infrared Sensor Input External Capacitor External Capacitor (-) Supply Voltage of Internal Stage External Capacitor (+) External Trimmer External Trimmer Output Signal (active low) Led Control Signal Output Signal (active high) Infrared Sensor Drain +12V Output Voltage Input Supply Voltage Mechanical Dimensions 40.64 mm Components Side 1 16 15.24 mm 1mm 2.54 mm TYPICAL APPLICATION + 47uF 4 6 7 100K 8 Sensitivity Control VCC2 14 Rele Subsonic Amplifier Detector Driver 12 + 47uF IR Sensor 2 VCC2 Linear Regulator 15 1 5-9-13 + 47uF 3 +5V 1K 10 PID1 16 11 LED + + 47uF Component typical values Pyroelectric IR sensor : Heimann LHi954 telecontrolli HEAD OFFICE & PLANT Via Naz. delle Puglie 177 80026 Casoria (NA), Italy Tel: +39 081 7599033 Fax: +39 081 7596494 Infrared Devices telecontrolli IRT1 Infrared Pulse Transmitter General description The IRT1 is an hybrid circuit that allows to realize an infrared barrier when utilized with an infrared pulse detector (IRD1). It shows stable electric characteristics thanks to the "Thick film hybrid" tecnhology. Features * * Applications * * High RFI Immunity SIL Package Residential and commercial security systems Automatic doors opening systems BLOCK DIAGRAM 4 VCC 5 1 IRED GND Electrical Characteristics CHARACTERISTICS VCC IS FIR Tp TOP Supply Voltage Supply Current Infrared Pulse Frequency Pulse Width Operating Temperature Range 300 Ta = 25C unless otherwise specified MIN 8 TYP 9 35 400 40 MAX 10 UNIT VDC mA Hz sec -20 +80 C Pin Description 1 4 5 GND Vcc IRED Ground Supply Voltage Infrared Emitting Diode Mechanical Dimensions 12.7 mm Components Side 16.9 mm 1 45 1mm 2.54 mm TYPICAL APPLICATION VCC 4 IRT1 1 Infrared Emitting Diode 5 Rele Photodiode VCC IRD1 + 12V + 100uF LED IRD1 = Infrared Pulse Detector (see Data Sheet) IRED: TSHA 5200 - 5203 Temic Photodiode: BPW 43 - BP104 Temic Component typical values telecontrolli HEAD OFFICE & PLANT Via Naz. delle Puglie 177 80026 Casoria (NA), Italy Tel: +39 081 7599033 Fax: +39 081 7596494 Infrared Devices telecontrolli IRD1 Infrared Pulse Detector General description The IRD1 is an hybrid circuit that allows to realize an infrared barrier when utilized with an infrared pulse transmitter (IRT1). IRD1 detect IR pulses and activate the output signal when the barrier is interrupted by an object. It shows stable electric characteristics thanks to the "Thick film hybrid" tecnhology. Features * * Applications * * High RFI Immunity SIL Package Residential and commercial security systems Automatic doors opening systems BLOCK DIAGRAM FTD-A 2 Amplifier 3 Detector Driver OUT 7 FTD-K OUT1 Linear Regulator 9 to internal circuit +8.5V 2.2K LED 8 VCC1 14 VCC2 15 CEXT 13 GND 1 VCC 4-12 Electrical Characteristics CHARACTERISTICS VCC1 VCC2 IS FIR IO TOP Supply Voltage Supply Voltage Supply Current Infrared Pulse Frequency Out Sink Current Operating Temperature Range -20 300 Ta = 25C unless otherwise specified MIN 18 9 TYP 24 12 3 400 MAX 32 18 UNIT VDC/VAC VDC/VAC mA Hz mA C 20 +80 Pin Description 1 2 3 4-12 7 8 9 13 14 15 GND FTD-A FTD-K Vcc Out LED Out1 CEXT Vcc1* Vcc2* Ground Photodiode Anode Photodiode Katode Supply Voltage of Internal Stage Output Signal (Low if impulse received) Led Control Signal Output Signal (High if impulse received) External Filter Capacitor 24V DC/AC Supply Voltage 12V DC/AC Supply Voltage Mechanical Dimensions 38.1 mm Components Side 1 4 7 9 12 15 10.9 mm 1mm 2.54 mm * Only one power supply voltage is necessary (12 or 24 V) TYPICAL APPLICATION VCC Photodiode 2 Rele Amplifier Detector Driver 7 IRT1 3 + 10uF IRT1 = Infrared Pulse Transmitter (see Data Sheet) 14 15 13 VCC IRD1 9 Linear Regulator 1 4-12 +8.5V LED 8 + IRED: TSHA 5200 - 5203 Temic Photodiode: BPW 43 - BP104 Temic + 100uF Component typical values 24V telecontrolli HEAD OFFICE & PLANT Via Naz. delle Puglie 177 80026 Casoria (NA), Italy Tel: +39 081 7599033 Fax: +39 081 7596494 |
Price & Availability of RR15-XXX
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |