View 132-2-0-202_530298.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Model 132
Vishay Spectrol
1 5/16" (33.3 mm) Low Cost Industrial Single Turn Wirewound, Bushing Mount Type
FEATURES
* Suitable model for all industrial applications
* Center tap available * Continuous rotation and mechanical stops both standard * Large electrical angle: 352 2
RoHS
COMPLIANT
ELECTRICAL SPECIFICATIONS
PARAMETER Total Resistance Tolerance: 50 and Above Below 50 Linearity (Independent) Total Resistance 5 to 20 20 to 200 200 and Above Noise Power Rating MIL-PRF-12934 TEST PROCEDURES APPLY STANDARD SPECIAL 5 to 20 k to 35 k 3% 1% 5% 3% STANDARD BEST PRACTICAL 1.0 % 1.0 % 0.5 % 100 ENR 40 C ambient 2.75 W derated to zero at 125 C 352 2 340 5 1000 M minimum at 500 VDC 1000 VRMS, 60 Hz 1.0 % of total resistance or 0.5 whichever is greater 0.5 % maximum Refer to standard resistance element data 0.75 % 0.50 % 0.25 %
Electrical Angle Continuous Rotation Stops Insulation Resistance Dielectric Strength Absolute Minimum Resistance Minimum Voltage Temperature Coefficient of Resistance
MATERIAL SPECIFICATIONS
Housing Rear Lid Shaft Terminals Mount Hardware Lockwasher Internal Tooth: Panel Nut: Molded glass filled thermoplastic Glass filled thermoset plastic Stainless steel, non-magnetic Brass, plated for solderability, Non-passivated Steel, nickel plated Brass, nickel plated
ENVIRONMENTAL SPECIFICATIONS
Vibration Shock Salt Spray Rotational Life Shaft Revolutions Operating Temperature Range 500 000 - 55 C to + 125 C 15 Gs thru 2000 Hz 50 g 48 h
ORDERING INFORMATION/DESCRIPTION
132 MODEL 0 MECHANICAL OPTIONS 0. Continuous 2. Stops 0 OTHER OPTIONAL FEATURES 0. Standard (end taps) 1. Center tap (within 5 of electrical center) 20K OHMIC VALUE BO10 PACKAGING Box of 10 pieces
Other characteristics will be standard as described on this specification sheet. If special characteristics are required such as special linearity tolerance, special resistance tolerance, non-linear functions, etc., please state these on your order.
SAP PART NUMBERING GUIDELINES
132 MODEL 2 MECHANICAL OPTIONS 2: With stops www.vishay.com 86 1 ELECTRICAL OPTIONS 1: With center tap 103 OHMIC VALUE 103: 10K B10 PACKAGING Box of 10 pieces Document Number: 57096 Revision: 19-Jun-07
For technical questions, contact: sfer@vishay.com
Model 132
1 5/16" (33.3 mm) Low Cost Industrial Single Turn Wirewound, Bushing Mount Type
DIMENSIONS in inches (millimeters)
0.015
Vishay Spectrol
0.875 (22.22) 0.375 (9.52)
0.031
60
O 0.500 (12.70) BC
0.015
0.187 (4.75)
0.015
0.625 (15.88) 0.062 (1.57)
0.015
O 0.4062 - 0.0020 MTG. (10.32) 0.032 (0.81)
0.010
+ 0.0000
O 0.2497 (6.34) - 0.0003 0.030 MAX. (0.76)
+ 0.0000
0.015 O 1.312 (33.32)
0.562 (14.27)
0.032 (0.81)
3/ 8
- 32 UNEF - 2A
O 0.125 (3.18) 0.062 (1.57)
2 1
CW
3
TOLERANCES: UNLESS OTHERWISE NOTED. DECIMALS 0.005 ANGLES 2
MTG. SURFACE
SCHEMATIC
MECHANICAL SPECIFICATIONS
PARAMETER Rotation Bearing Type Torque (Maximums) Runouts (Maximums) Shaft Runout (TIR) Pilot Dia. Runout (TIR) Lateral Runout (TIR) Shaft End Play Shaft Radial Play Weight Stop Strength 360 (continuous) or 340 5 (stops) Sleeve RUNNING STARTING 0.7 oz.- in (50.40 g - cm) 1.0 oz. - in (72 g - cm) 0.002" (0.05 mm) 0.003" (0.08 mm) 0.005" (0.13 mm) 0.008" (0.20 mm) 0.003" (0.08 mm) 1.0 oz. maximum (28.35 g) 8.0 in - lbs (9.21 kg - cm) (stops version only)
POWER RATING CHART
6.0
RESISTANCE ELEMENT DATA
RESISTANCE VALUES () 5 10 20 50 100 RESOLUTION (%) 0.419 0.327 0.280 0.290 0.251 0.212 0.161 0.150 0.132 0.107 0.080 0.067 0.057 OHMS PER TURN 0.021 0.032 0.056 0.145 0.251 0.424 0.806 1.50 2.64 5.34 7.98 13.4 20.0 MAXIMUM CURRENT AT 40 C AMBIENT (mA) 742 524 371 234 166 122 74.2 52.4 37.1 23.4 16.6 12.2 8.88 MAXIMUM WIRE VOLTAGE TEMP. ACROSS COEF. COIL (ppm/C) (V) 3.71 5.24 7.42 11.7 16.6 24.4 37.1 52.4 74.2 117 166 244 311 800 800 800 20 20 20 20 20 20 20 20 20 20
RATED POWER IN W
5.0 4.0 3.0 2.0 1.0 0 20 40 60 80 100 120 140
200 500 1K 2K
AMBIENT TEMPERATURE IN C
MARKING
Unit Identification Units shall be marked with Vishay Spectrol name, model number, resistance and tolerance, linearity, terminal identification, and data code Applicable test procedures: MIL-R-12934
5K 10K 20K 35K
Document Number: 57096 Revision: 19-Jun-07
For technical questions, contact: sfer@vishay.com
www.vishay.com 87
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 18-Jul-08
www.vishay.com 1

▲Up To Search▲

Price & Availability of 132-2-0-202

	To Download 132-2-0-202 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .