 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Agilent HSMx-C177, HSMx-C197 Low Profile Chip LEDs Data Sheet Description The HSMx-C177 and HSMx-C197 ChipLEDs are designed specifically for the membrane switch application. The request is to have the height as low as possible while retaining the footprint at the optimal size of a 0805 (2.0 x 1.25 mm) or 0603 (1.6 x 0.8 mm) device. Apart from the membrane switch application, the HSMx-C177 is also suitable for use in applications where low height is required. Device Selection Guide AS AlInGaP Product Number HSMA-C177/C197 HSMT-C177/C197 HSMC-C177/C197 HSML-C177/C197 GaP Product Number HSMG-C177/C197 HSMD-C177/C197 HSMS-C177/C197 HSMY-C177/C197 InGaN Product Number HSMQ-C177/C197 HSMR-C177/C197 Color Green Blue Color Green Orange HER Yellow Color Amber Deep Red Red Orange Seven different colors are available: green, red, yellow, orange, deep red, blue, and amber. All parts are intensity binned and color binned (except for red color). They come in 8 mm tape on a 7 inch diameter reel with 4000 units per reel which makes them compatible for automatic placement. Features * Small size with extremely low profile * 0805 or 0603 industry standard footprint with 0.4 mm height * Diffused optics * Operating temperature range of -30C to +85C * Compatible with IR soldering * Available in 7 colors * Available in 8 mm tape on 7" diameter reel * Reel sealed in zip locked moisture barrier bags Applications * Membrane switch indicator * LCD backlighting * Push button backlighting * Front panel indicator * Symbol backlighting * Keypad backlighting Package Description Untinted, Diffused Untinted, Diffused Untinted, Diffused Untinted, Diffused Package Description Untinted, Diffused Untinted, Diffused Untinted, Diffused Untinted, Diffused Package Description Untinted, Diffused Untinted, Diffused Package Dimensions CATHODE MARK LED DIE CATHODE MARK LED DIE 1.25 (0.049) 0.80 (0.031) 0.40 (0.016) 2.00 (0.079) 0.62 (0.025) 1.60 (0.063) POLARITY DIFFUSED EPOXY 0.40 (0.016) DIFFUSED EPOXY POLARITY 0.40 (0.016) PC BOARD PC BOARD 0.16 (0.006) 0.16 (0.006) CATHODE LINE CATHODE LINE 0.40 (0.016) 0.40 (0.016) 0.30 (0.012) 0.70 (0.028) MIN. 1.10 (0.043) MIN. SOLDERING TERMINAL SOLDERING TERMINAL HSMx-C177 HSMx-C197 NOTES: 1. ALL DIMENSIONS IN MILLIMETERS (INCHES). 2. TOLERANCE IS 0.1 mm ( 0.004 IN.) UNLESS OTHERWISE SPECIFIED. 2 Absolute Maximum Ratings at TA = 25C Parameter DC Forward Current [1] Peak Pulsing Current[2] Power Dissipation Reverse Voltage (I R = 100 A) LED Junction Temperature Operating Temperature Range Storage Temperature Range Soldering Temperature Notes: 1. Derate linearly as shown in Figure 4. 2. Pulse condition of 1/10 duty and 0.1 ms width. HSMA/C/L-C177/C197, HSMT-C177/C197 25 100 64 5 95 -30 to +85 -40 to +85 HSMG/D/S/Y-C177/C197 20 100 54 5 95 -30 to +85 -40 to +85 HSMQ/R-C177/C197 20 100 78 5 95 -30 to +85 -40 to +85 Units mA mA mW V C C C See IR soldering profile (Figure 7) Electrical Characteristics at TA = 25C Forward Voltage VF (Volts) @ IF = 20 mA Typ. Max. 1.9 1.9 1.9 1.9 2.2 2.2 2.1 2.1 3.4 3.4 2.4 2.4 2.4 2.4 2.6 2.6 2.6 2.6 3.9 3.9 Reverse Breakdown VR (Volts) @ IR = 100 A Min. 5 5 5 5 5 5 5 5 5 5 Capacitance C (pF), VF = 0, f = 1 MHz Typ. 11 15 20 15 9 7 5 6 110 110 Thermal Resistance RJ-PIN (C/W) Typ. 300 300 300 300 250 250 250 250 350 350 Part Number HSMA-C177/197 HSMC-C177/197 HSML-C177/197 HSMT-C177/197 HSMG-C177/197 HSMD-C177/197 HSMS-C177/197 HSMY-C177/197 HSMQ-C177/197 HSMR-C177/197 VF Tolerance: 0.1 V 3 Optical Characteristics at TA = 25C Luminous Intensity IV (mcd) @ 20 mA[1] Min. Typ. 25 25 25 10 4.0 2.5 2.5 2.5 40 16 90 90 90 30 15 8 10 8 145 55 Peak Wavelength peak (nm) Typ. 595 637 609 660 570 605 630 589 520 469 Color, Dominant Wavelength d[2] (nm) Typ. 592 626 605 639 572 604 626 586 527 473 Viewing Angle 2 1/2 Degrees [3] Typ. 130 130 130 130 130 130 130 130 130 130 Luminous Efficacy V (lm/w) Typ. 480 155 370 70 595 380 145 500 510 88 Part Number HSMA-C177/197 HSMC-C177/197 HSML-C177/197 HSMT-C177/197 HSMG-C177/197 HSMD-C177/197 HSMS-C177/197 HSMY-C177/197 HSMQ-C177/197 HSMR-C177/197 Color AS Amber AS Red AS Orange AS Deep Red GaP Green GaP Orange HER GaP Yellow InGaN Green InGaN Blue Notes: 1. The luminous intensity, IV, is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of the lamp package. 2. The dominant wavelength, d, is derived from the CIE Chromaticity Diagram and represents the perceived color of the device. 3. 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity. Color Bin Limits Green Color Bins[1] Dom. Wavelength (nm) Min. 561.5 564.5 567.5 570.5 573.5 Bin ID A B C D E Tolerance: 0.5 nm Max. 564.5 567.5 570.5 573.5 576.5 Bin ID A B C D Tolerance: 1 nm Blue Color Bins[1] Dom. Wavelength (nm) Min. 460.0 465.0 470.0 475.0 Max. 465.0 470.0 475.0 480.0 4 Bin ID A B C D E F Tolerance: 1 nm Orange Color Bins [1] Dom. Wavelength (nm) Min. 597.0 600.0 603.0 606.0 609.0 612.0 Max. 600.0 603.0 606.0 609.0 612.0 615.0 Bin ID A B C D E F Tolerance: 0.5 nm Yellow/Amber Color Bins[1] Dom. Wavelength (nm) Min. 582.0 584.5 587.0 589.5 592.0 594.5 Max. 584.5 587.0 589.5 592.0 594.5 597.0 Bin ID A B C D Tolerance: 1 nm InGaN Green Color Bins[1] Dom. Wavelength (nm) Min. 515.0 520.0 525.0 530.0 Max. 520.0 525.0 530.0 535.0 Light Intensity (Iv) Bin Limits[1] Intensity (mcd) Bin ID Min. Max. A 0.11 0.18 B 0.18 0.29 C 0.29 0.45 D 0.45 0.72 E 0.72 1.10 F 1.10 1.80 G 1.80 2.80 H 2.80 4.50 J 4.50 7.20 K 7.20 11.20 L 11.20 18.00 M 18.00 28.50 N 28.50 45.00 P 45.00 71.50 Q 71.50 112.50 R 112.50 180.00 S 180.00 285.00 T 285.00 450.00 U 450.00 715.00 V 715.00 1125.00 W 1125.00 1800.00 X 1800.00 2850.00 Y 2850.00 4500.00 Tolerance: 15% Note: 1. Bin categories are established for classification of products. Products may not be available in all categories. Please contact your Agilent representative for information on currently available bins. Note: 1. Bin categories are established for classification of products. Products may not be available in all categories. Please contact your Agilent representative for information on currently available bins. 5 100 RELATIVE INTENSITY - % 90 80 70 60 50 40 30 20 10 0 400 InGaN BLUE InGaN GREEN AS AMBER AS RED AS ORANGE AS DEEP RED 450 500 550 WAVELENGTH - nm 600 650 700 Figure 1a. Relative intensity vs. wavelength. 1.0 GaP GREEN RELATIVE INTENSITY HER 0.8 GaP YELLOW 0.6 GaP ORANGE 0.4 0.2 0 500 525 550 575 600 625 650 675 700 725 WAVELENGTH - nm Figure 1b. Relative intensity vs. wavelength. 100 100 IF - FORWARD CURRENT - mA IF - FORWARD CURRENT - mA AS AlInGaP 10 HER LPE GREEN GaP YELLOW 1 GaP ORANGE 10 1 InGan 0 0 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 VF - FORWARD VOLTAGE - V 1.5 2.0 2.5 3.0 3.5 4.0 VF - FORWARD VOLTAGE - V Figure 2. Forward current vs. forward voltage. 6 1.2 1.0 0.8 0.6 0.4 0.2 0 IF MAX. - MAXIMUM FORWARD CURRENT - mA 1.4 1.2 LUMINOUS INTENSITY (NORMALIZED AT 20 mA) 30 25 AlInGaP 20 15 10 5 0 InGaN GaP LUMINOUS INTENSITY (NORMALIZED AT 20 mA) 1.0 0.8 AS AMBER 0.6 0.4 0.2 0 0 5 10 15 20 25 30 AS ORANGE, RED, and DEEP RED InGaN GaP 0 5 10 15 20 25 0 10 20 30 40 50 60 70 80 90 100 TA - AMBIENT TEMPERATURE - C IF - FORWARD CURRENT - mA IF - FORWARD CURRENT - mA Figure 3. Luminous intensity vs. forward current. Figure 4. Maximum forward current vs. ambient temperature. 100 90 RELATIVE INTENSITY - % 80 70 60 TEMPERATURE 10 SEC. MAX. 230C MAX. 140-160C 4C/SEC. MAX. OVER 2 MIN. 4C/SEC. MAX. -3C/SEC. MAX. 50 40 30 20 10 0 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 TIME ANGLE Figure 5. Relative intensity vs. angle. Figure 6. Recommended reflow soldering profile. CENTERING BOARD CENTERING BOARD 0.8 (0.031) 1.2 (0.047) 1.2 (0.047) 1.2 (0.047) 0.8 (0.031) 0.9 (0.035) 0.7 (0.028) 0.8 (0.031) Figure 7. Recommended soldering pattern for HSMx-C177. Figure 8. Recommended soldering pattern for HSMx-C197. NOTE: 1. ALL DIMENSIONS IN MILLIMETERS (INCHES). 7 USER FEED DIRECTION CATHODE SIDE PRINTED LABEL Figure 9. Reeling orientation. 8.0 1.0 (0.315 0.039) 10.50 1.0 (0.413 0.039) O 20.20 MIN. (O 0.795 MIN.) O 13.1 0.5 (O 0.516 0.020) 3.0 0.5 (0.118 0.020) 178.40 1.00 (7.024 0.039) 59.60 1.00 (2.346 0.039) 4.0 0.5 (0.157 0.020) 6 PS 5.0 0.5 (0.197 0.020) Figure 10. Reel dimensions. NOTE: 1. ALL DIMENSIONS IN MILLIMETERS (INCHES). 8 4.00 (0.157) 1.50 (0.059) CATHODE DIM. C (SEE TABLE 1) 0.20 0.05 (0.008 0.002) 1.75 (0.069) 3.50 0.05 (0.138 0.002) DIM. A (SEE TABLE 1) 8.00 0.30 (0.315 0.012) DIM. B (SEE TABLE 1) 2.00 0.05 (0.079 0.002) 4.00 (0.157) CARRIER TAPE USER FEED DIRECTION COVER TAPE TABLE 1 DIMENSIONS IN MILLIMETERS (INCHES) PART NUMBER HSMx-C177 SERIES HSMx-C197 SERIES DIM. A DIM. B DIM. C 0.10 ( 0.004) 0.10 ( 0.004) 0.10 ( 0.004) 2.40 (0.094) 1.80 (0.071) 1.60 (0.063) 0.95 (0.037) 0.65 (0.025) 0.60 (0.024) Figure 11. Tape dimensions. END START Convective IR Reflow Soldering For more information on IR reflow soldering, refer to Application Note 1060, Surface Mounting SMT LED Indicator Components. Storage Condition: 5 to 30C @ 60% RH max. Baking is required under the condition: a) the blue silica gel indicator becoming white/transparent color b) the pack has been open for more than 1 week Baking recommended condition: 60 5C for 20 hours. THERE SHALL BE A MINIMUM OF 160 mm (6.3 INCH) OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE. MOUNTED WITH COMPONENTS THERE SHALL BE A MINIMUM OF 160 mm (6.3 INCH) OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE. MINIMUM OF 230 mm (9.05 INCH) MAY CONSIST OF CARRIER AND/OR COVER TAPE. Figure 12. Tape leader and trailer dimensions. NOTES: 1. ALL DIMENSIONS IN MILLIMETERS (INCHES). 2. TOLERANCE IS 0.1 mm ( 0.004 IN.) UNLESS OTHERWISE SPECIFIED. 9 www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (408) 654-8675 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 271 2451 India, Australia, New Zealand: (+65) 271 2394 Japan: (+81 3) 3335-8152(Domestic/International), or 0120-61-1280(Domestic Only) Korea: (+65) 271 2194 Malaysia, Singapore: (+65) 271 2054 Taiwan: (+65) 271 2654 Data subject to change. Copyright (c) 2002 Agilent Technologies, Inc. Obsoletes 5988-3043EN January 27, 2002 5988-5501EN |
Price & Availability of HSMS-C177
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |