|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
SOLID STATE DEVICES, INC. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SVR1118 SERIES 800 mAmps /2.5 thru 5Volts FIXED LOW DROPOUT LINEAR VOLTAGE REGULATOR FEATURES: * * * * * * * * * * * * * Replacement for LT1118 Seres Eutectic Die Attach Regulates While Sourcing or Sinking Current 600:A Quiescent Current : Ultra Low Power Shutdown Mode Stable for Any CLOAD P 0.22:F : Fast Settling Time 1V Dropout Voltage Isolated Hermetically Sealed Power Package 150oC Operating Temperature Custom Lead Forming Available Class H or K (Space) Screening Available Radiation Tolerant Devices are Available Designer's Data Sheet Part Number /Ordering Information 1/ SVR1118 - 2.5 J DB H Screening 2/: _ = Not Screened H = High Rel Level K = Space Level R = Radiation Tolerant Lead Bend: 3/ _ = Straight DB = Down Bend UB = Up Bend Z = Z Bend Package: 4/ J = TO-257 G = CerPack S.5 = SMD.5 -28= LCC 28 Voltage: 2.5 = 2.5V 2.85= 2.85V 5 = 5V MAXIMUM RATINGS Supply Voltage Input Voltage Output Voltage Operating Temperature Storage Temperature TO-257 (J): CerPack (G): SYMBOL VCC VIN VOUT TO P TSTG SMD.5 (S.5): VALUE 15 -0.2 to 7 -0.2 to VCC + 0.5 -55 to +150 -65 to +150 LCC 28 (-28): UNITS V V V o C C o FOR PACKAGE OUTLINE REQUEST FOLLOWING DOCUMENTS PACKAGE TO-257 (J, JDB, JUB) CerPack (G, GZB) SMD.5 (S.5) LCC28 (-28) NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. PIN ASSIGNMENT PACKAGE TO-257 (J) CerPack (G) SMD.5 (S.5) LCC 28 (-28) Vout Pin 1 Pin 1 Pin 2 1, 15 - 28 Gnd Pin 2 Base Pin 1 5 - 11 Vin Pin 3 Pin 2 Pin 3 2, 3, 13, 14 DOCUMENT 60-0149-504 60-0149-366 60-0149-507 60-0149-342 DATA SHEET #: SVR005A SVR1118 SERIES SOLID STATE DEVICES, INC. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com Electrical Characteristics Quiescent Current Quiescent Current in Shutdoun Enable Input Threshholds 4/ to VIN = 5V VIN = 0V Input Low Level Input High Level * * * * 25 * 25 * 25 * * * * * * * * * * 25 25 25 25 25 25 SYMBOL VIN VIN MIN --0.4 -- TYP 0.6 1.0 1.4 1.4 2.5 2.5 2.85 2.85 5.0 5.0 ---------0.85 1.0 80 MAX 1.0 10 -2 2.53 2.55 2.88 2.91 5.05 5.10 6.0 6.0 10 10 10 10 10 25 25 1.1 1.3 -- UNITS mA :A V V V V V V V V mV mV mV mV mV mV mV mV mV V V dB :sec Output Voltage SVR1118-2.5 No Load All Operating Conditions 5/ SVR1118-2.85 No Load All Operating Conditions 5/ SVR1118-5 No Load All Operating Conditions 5/ SVR1118-2.5 SVR1118-2.85 SVR1118-5 SVR1118-2.5 SVR1118-2.85 SVR1118-5 7/ VOUT 2.47 2.45 2.82 2.79 4.95 4.90 -----------60 Line Regulation (IOUT = 0A) Load Regulation 6/ (4.2V # VIN # 15V) (4.75V # VIN # 15V) (6.5V # VIN # 20V) (0#IOUT#800mA) (-400mA#IOUT#0) (0#IOUT#800mA) (-400mA#IOUT#0) (0#IOUT#800mA) (-400mA#IOUT#0) (IOUT = 100mA) (IOUT = 800mA) VOUT VIN VOUT IOUT Dropout Voltage V Ripple Rejection (fRIPPLE = 120Hz, VRIPPLE = 0.5VP-P, V=2V) (0#IOUT#800mA) (-400mA#IOUT#0) (VOUT = 0) (VOUT = VIN) No Load No Load Load Transient Settling Time V = 25V; CLOAD =1:F Output Short Circuit Current --ISC + ISC 800 ---- 5 5 1200 -700 170 50 ---- 400 --- mA mA o Thermal Shutdown Junction Temperature Enable Turn-On Delay NOTES: * Full Temperature Range C :sec 1/ For Ordering Information, Price, and Availability Contact Fac- 5/ All Operating Conditions include the combined effects of Load tory. Current, Input Voltage, and Temperature over each parameter's full range. 2/ Screening per MIL-PRF-19500. 3/ For Package Outlines and Lead Bend Options Contact Factory 6/ Load and Line Regulation are tested at a constant junction temperature by low duty cycle pulse testing. 4/ Unless Otherwise Specified, testing done at VCC = 5V 7/ Dropout Voltage is defined as a minimum Input to Output (for SVR1118-2.5 and SVR1118-2.85) and at VCC = 7V Voltage measured while sourcing the specified current. (for SVR1118-5); CLOAD = 1:F; ILOAD = 0. |
Price & Availability of SRV1118-5GZH |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |