 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| EL2244C, EL2444C EL2244C, EL2444C Dual/Quad Low-Power 120MHz Unity-Gain Stable Op Amp Features * 120MHz gain-bandwidth product * Unity-gain stable * Low supply current (per amplifier) - 5.2mA at VS = 15V * Wide supply range - 2V to 18V dual-supply, 2.5V to 36V singlesupply * High slew rate - 325V/s * Fast settling - 80ns to 0.1% for a 10V step * Low differential gain - 0.04% at AV = +2, RL = 1503/4 * Low differential phase - 0.15 at AV = +2, RL = 150 * Stable w/ unlimited capacitive load * Wide output voltage swing 13.6V with VS = 15V, RL = 1000, 3.8V/0.3V with VS = +5V, RL = 500 * Low cost, enhanced replacement for the AD827 andLT1229/LT1230 General Description The EL2244C/EL2444C are dual and quad versions of the popular EL2044C. They are high speed, low power, low cost monolithic operational amplifiers built on Elantec's proprietary complementary bipolar process. The EL2244C/EL2444C are unity-gain stable and feature a 325V/s slew rate and 120MHz gain-bandwidth product while requiring only 5.2mA of supply current per amplifier. The power supply operating range of the EL2244C/EL2444C is from 18V down to as little as 2V. For single-supply operation, the EL2244C/EL2444C operate from 36V down to as little as 2.5V. The excellent power supply operating range of the EL2244C/EL2444C makes them an obvious choice for applications on a single +5V or +3V supply. The EL2244C/EL2444C also feature an extremely wide output voltage swing of 13.6V with VS = 15V and RL = 1000. At 5V, output voltage swing is a wide 3.8V with RL = 500 and 3.2V with RL = 150. Furthermore, for single-supply operation at +5V, output voltage swing is an excellent 0.3V to 3.8V with RL = 500. At a gain of +1, the EL2244C/EL2444C have a -3dB bandwidth of 120MHz with a phase margin of 50. They can drive unlimited load capacitance, and because of their conventional voltage-feedback topology, the EL2244C/EL2444C allow the use of reactive or non-linear elements in their feedback network. This versatility combined with low cost and 75mA of output-current drive make the EL2244C/EL2444C an ideal choice for price-sensitive applications requiring low power and high speed. Applications * * * * * * * * * * * Video amplifier Single-supply amplifier Active filters/integrators High-speed sample-and-hold High-speed signal processing ADC/DAC buffer Pulse/RF amplifier Pin diode receiver Log amplifier Photo multiplier amplifier Difference amplifier Connection Diagrams EL2244CN/CS Dual EL2444CN/CS Quad September 26, 2001 Ordering Information Part No. EL2244CN EL2244CS EL2444CN EL2444CS EL2444CM Temp. Range -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C Package 8-Pin P-DIP 8-Lead SO 14-Pin P-DIP 14-Lead SO 16-Lead SOL Outline # MDP0031 MDP0027 MDP0031 MDP0027 MDP0027 Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a "controlled document". Current revisions, if any, to these specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation. (c) 2001 Elantec Semiconductor, Inc. EL2244C, EL2444C EL2244C, EL2444C Dual/Quad Low-Power 120MHz Unity-Gain Stable Op Amp Absolute Maximum Ratings (T Supply Voltage (VS) Peak Output Current (IOP) Output Short-Circuit Duration A heat-sink is required to keep junction temperature below absolute maximum when an output is shorted. A = 25 C) 18V or 36V Short-Circuit Protected Infinite Input Voltage (VIN) VS Differential Input Voltage (dVIN) Power Dissipation (PD) Operating Temperature Range (TA) Operating Junction Temperature (TJ) Storage Temperature (TST) 10V See Curves -40C to +85C 150C -65C to +150C Important Note: All parameters having Min/Max specifications are guaranteed. Typ values are for information purposes only. Unless otherwise noted, all tests are at the specified temperature and are pulsed tests, therefore: TJ = TC = TA. DC Electrical Characteristics VS = 15V, RL = 1000, unless otherwise specified Parameter VOS TCVOS IB Description Input Offset Voltage Average Offset Voltage Drift Input Bias Current Input Offset Current Average Offset Current Drift Open-Loop Gain VS = 15V [1] Condition Temp 25C TMIN, TMAX All 25C TMIN, TMAX 25C 25C TMIN, TMAX 25C All 25C TMIN, TMAX 25C 25C 25C TMIN, TMAX 25C TMIN, TMAX 25C 25C 25C 25C TMIN, TMAX 25C 25C 25C 25C TMIN, TMAX 25C TMIN, TMAX Min Typ 0.5 10.0 2.8 2.8 50 50 0.3 Max 4.0 9.0 8.2 11.2 300 500 Unit mV mV V/C A A A nA nA nA nA/C V/V V/V V/V V/V dB dB dB dB V V V V V V V V V V mA mA VS = 15V VS = 5V IOS VS = 15V VS = 5V TCIOS AVOL [1] VS = 15V,VOUT = 10V, RL = 1000 VS = 5V, VOUT = 2.5V, RL = 500 VS = 5V, VOUT = 2.5V, RL = 150 800 600 1500 1200 1000 PSRR CMRR CMIR Power Supply Rejection Ratio Common-Mode Rejection Ratio Common-Mode Input Range Output Voltage Swing VS = 5V to 15V VCM = 12V, V OUT = 0V VS = 15V VS = 5V VS = +5V VS = 15V, RL = 1000 VS = 15V, RL = 500 VS = 5V, RL = 500 VS = 5V, RL = 150 VS = +5V, RL = 500 65 60 70 70 80 90 14.0 4.2 4.2/0.1 VOUT 13.4 13.1 12.0 3.4 3.6/0.4 3.5/0.5 40 35 13.6 13.4 3.8 3.2 3.8/0.3 75 5.2 7 7.6 7.6 5.0 ISC IS Output Short Circuit Current Supply Current (Per Amplifier) VS = 15V, No Load 25C TMIN TMAX mA mA mA mA VS = 5V, No Load 25C 2 EL2244C, EL2444C EL2244C, EL2444C Dual/Quad Low-Power 120MHz Unity-Gain Stable Op Amp DC Electrical Characteristics (Continued) VS = 15V, RL = 1000, unless otherwise specified Parameter RIN CIN ROUT PSOR Description Input Resistance Input Capacitance Output Resistance Power-Supply Operating Range Differential Common-Mode AV = +1@ 10MHz AV = +1 Dual-Supply Single-Supply Condition Temp 25C 25C 25C 25C 25C 25C 2.0 2.5 Min Typ 150 15 1.0 50 18.0 36.0 Max Unit k M pF m V V 1. Measured from T MIN to TMAX. 3 EL2244C, EL2444C EL2244C, EL2444C Dual/Quad Low-Power 120MHz Unity-Gain Stable Op Amp Closed-Loop AC Electrical Characteristics VS = 15V, AV = +1, RL = 1000 unless otherwise specified Parameter BW Description -3dB Bandwidth (VOUT = 0.4VPP) Condition VS = 15V, AV = +1 VS = 15V, AV = -1 VS = 15V, AV = +2 VS = 15V, AV = +5 VS = 15V, AV = +10 VS = 5V, AV = +1 GBWP PM CS SR FPBW tr, tf OS tPD ts dG dP eN iN CI STAB Gain-Bandwidth Product Phase Margin Channel Separation Slew Rate [1] Full-Power Bandwidth [2] Rise Time, Fall Time Overshoot Propagation Delay Settling to +0.1% (AV = +1) Differential Gain [3] Differential Phase [3] Input Noise Voltage Input Noise Current Load Capacitance Stability VS = 15V, 10V Step VS = 5V, 5V Step NTSC/PAL NTSC/PAL 10kHz 10kHz AV = +1 VS = 15V VS = 5V RL = 1 k3/4, CL = 10pF f = 5MHz VS = 15V, RL = 1000 VS = 5V, RL = 500 VS = 15V VS = 5V 0.1V Step 0.1V Step Temp 25C 25C 25C 25C 25C 25C 25C 25C 25C 25C 25C 25C 25C 25C 25C 25C 25C 25C 25C 25C 25C 25C 25C 25C 4.0 250 Min Typ 120 60 60 12 6 80 60 45 50 85 325 200 5.2 12.7 3.0 20 2.5 80 60 0.04 0.15 15.0 1.50 Infinite Max Unit MHz MHz MHz MHz MHz MHz MHz MHz dB V/s V/s MHz MHz ns % ns ns ns % nVHz pAHz pF 1. Slew rate is measured on rising edge 2. For VS = 15V, VOUT = 20VPP. For VS = 5V, VOUT = 5VPP. Full-power bandwidth is based on slew rate measurement using: FPBW = SR/(2 * Vpeak). 3. Video Performance measured at VS = 15V, AV = +2 with 2 times normal video level across RL = 150. This corresponds to standard video levels across a back-terminated 75 load. For other values of RL, see curves. 4 EL2244C, EL2444C EL2244C, EL2444C Dual/Quad Low-Power 120MHz Unity-Gain Stable Op Amp Typical Performance Curves Non-Inverting Frequency Response Inverting Frequency Response Frequency Response for Various Load Resistances Open-Loop Gain and Phase vs Frequency Output Voltage Swing vs Frequency Equivalent Input Noise CMRR, PSRR and Closed-Loop Output Resistance vs Frequency 2nd and 3rd Harmonic Distortion vs Frequency Settling Time vs Output Voltage Change Supply Current vs Supply Voltage Common-Mode Input Range vs Supply Voltage Output Voltage Range vs Supply Voltage 5 EL2244C, EL2444C EL2244C, EL2444C Dual/Quad Low-Power 120MHz Unity-Gain Stable Op Amp Gain-Bandwidth Product vs Supply Voltage Open-Loop Gain vs Supply Voltage Slew-Rate vs Supply Voltage Bias and Offset Current vs Input Common-Mode Voltage Open-Loop Gain vs Load Resistance Voltage Swing vs Load Resistance Offset Voltage vs Temperature Bias and Offset Current vs Temperature Supply Current vs Temperature Gain-Bandwidth Product vs Temperature Open-Loop Gain, PSRR and CMRR vs Temperature Slew Rate vs Temperature 6 EL2244C, EL2444C EL2244C, EL2444C Dual/Quad Low-Power 120MHz Unity-Gain Stable Op Amp Short-Circuit Current vs Temperature Gain-Bandwidth Product vs Load Capacitance Overshoot vs Load Capacitance Small-Signal Step Response Large-Signal Step Response Differential Gain and Phase vs DC Input Offset at 3.58MHz Differential Gain and Phase vs DC Input Offset at 4.43MHz Differential Gain and Phase vs Number of 1503/4 Loads at 3.58MHz Differential Gain and Phase vs Number of 1503/4 Loads at 4.43MHz 8-Pin Plastic DIP Maximum Power Dissipation vs Ambient Temperature 8-Lead SO Maximum Power Dissipation vs Ambient Temperature 7 EL2244C, EL2444C EL2244C, EL2444C Dual/Quad Low-Power 120MHz Unity-Gain Stable Op Amp 14-Pin Plastic DIP Maximum Power Dissipation vs Ambient Temperature 14-Lead SO Maximum Power Dissipation vs Ambient Temperature Channel Separation vs Frequency Simplified Schematic (Per Amplifier) 8 EL2244C, EL2444C EL2244C, EL2444C Dual/Quad Low-Power 120MHz Unity-Gain Stable Op Amp Burn-In Circuit (Per Amplifier) All Packages Use the Same Schematic 9 EL2244C, EL2444C EL2244C, EL2444C Dual/Quad Low-Power 120MHz Unity-Gain Stable Op Amp Applications Information Product Description The EL2244C/EL2444C are low-power wideband monolithic operational amplifiers built on Elantec's proprietary high-speed complementary bipolar process. The EL2244C/EL2444C use a classical voltage-feedback topology which allows them to be used in a variety of applications where current-feedback amplifiers are not appropriate because of restrictions placed upon the feedback element used with the amplifier. The conventional topology of the EL2244C/EL2444C allows, for example, a capacitor to be placed in the feedback path, making it an excellent choice for applications such as active filters, sample-and-holds, or integrators. Similarly, because of the ability to use diodes in the feedback network, the EL2244C/EL2444C are an excellent choice for applications such as fast log amplifiers. V outmax =Maximum Output Voltage Swing of the Application RL =Load Resistance To serve as a guide for the user, we can calculate maximum allowable supply voltages for the example of the video cable-driver below since we know that TJmax = 150C, Tmax = 75C, ISmax = 7.6mA, and the package JAs are shown in Table 1. If we assume (for this example) that we are driving a back-terminated video cable, then the maximum average value (over duty-cycle) of Voutmax is 1.4V, and RL = 1503/4, giving the results seen in Table 1. Table 1 Duals Package JA Max PDiss @ Tmax Max VS EL2244CN EL2244CS QUADS EL2444CN EL2444CS PDIP8 SO8 PDIP14 SO14 95C/W 150C/W 70C/W 110C/W 0.789W @ 75C 0.500W @ 75C 1.071W @ 75C 0.682W @ 75C 16.6V 10.7V 11.5V 7.5V Power Dissipation With the wide power supply range and large output drive capability of the EL2244C/EL2444C, it is possible to exceed the 150C maximum junction temperatures under certain load and power-supply conditions. It is therefore important to calculate the maximum junction temperature (TJmax) for all applications to determine if power supply voltages, load conditions, or package type need to be modified for the EL2244C/EL2444C to remain in the safe operating area. These parameters are related as follows: TJmax = Tmax + (JA* (PDmaxtotal)) where PDmaxtotal is the sum of the maximum power dissipation of each amplifier in the package (PDmax). PDmax for each amplifier can be calculated as follows: PDmax= (2*VS*ISmax+(VS-Voutmax)*(Voutmax/RL)) where: Tmax =Maximum Ambient Temperature JA =Thermal Resistance of the Package PDmax =Maximum Power Dissipation of 1 Amplifier VS =Supply Voltage ISmax =Maximum Supply Current of 1 Amplifier Single-Supply Operation The EL2244C/EL2444C have been designed to have a wide input and output voltage range. This design also makes the EL2244C/EL2444C an excellent choice for single-supply operation. Using a single positive supply, the lower input voltage range is within 100mV of ground (R L = 500), and the lower output voltage range is within 300 mV of ground. Upper input voltage range reaches 4.2V, and output voltage range reaches 3.8V with a 5V supply and RL = 500. This results in a 3.5V output swing on a single 5V supply. This wide output voltage range also allows single-supply operation with a supply voltage as high as 36V or as low as 2.5V. On a single 2.5V supply, the EL2244C/EL2444C still have 1V of output swing. Gain-Bandwidth Product and the-3dB Bandwidth The EL2244C/EL2444C have a gain-bandwidth product of 120 MHz while using only 5.2mA of supply current per amplifier. For gains greater than 4, their closed-loop -3 dB bandwidth is approximately equal to the gain10 EL2244C, EL2444C EL2244C, EL2444C Dual/Quad Low-Power 120MHz Unity-Gain Stable Op Amp bandwidth product divided by the noise gain of the circuit. For gains less than 4, higher-order poles in the amplifiers' transfer function contribute to even higher closed loop bandwidths. For example, the EL2244C/EL2444C have a -3dB bandwidth of 120MHz at a gain of +1, dropping to 60MHz at a gain of +2. It is important to note that the EL2244C/EL2444C have been designed so that this "extra" bandwidth in low-gain applications does not come at the expense of stability. As seen in the typical performance curves, the EL2244C/EL2444C in a gain of +1 only exhibit 1.0dB of peaking with a 1000 load. characterized over the entire DC offset range from 0.714V to +0.714V. For more information, refer to the curves of dG and dP vs DC Input Offset. Output Drive Capability The EL2244C/EL2444C have been designed to drive low impedance loads. They can easily drive 6VPP into a 1503/4 load. This high output drive capability makes the EL2244C/EL2444C an ideal choice for RF, IF and video applications. Furthermore, the current drive of the EL2244C/EL2444C remains a minimum of 35 mA at low temperatures. The EL2244C/EL2444C are currentlimited at the output, allowing it to withstand shorts to ground. However, power dissipation with the output shorted can be in excess of the power-dissipation capabilities of the package. Video Performance An industry-standard method of measuring the video distortion of components such as the EL2244C/ EL2444C is to measure the amount of differential gain (dG) and differential phase (dP) that they introduce. To make these measurements, a 0.286VPP (40 IRE) signal is applied to the device with 0V DC offset (0 IRE) at either 3.58MHz for NTSC or 4.43MHz for PAL. A second measurement is then made at 0.714V DC offset (100 IRE). Differential gain is a measure of the change in amplitude of the sine wave, and is measured in percent. Differential phase is a measure of the change in phase, and is measured in degrees. For signal transmission and distribution, a back-terminated cable (75 in series at the drive end, and 75 to ground at the receiving end) is preferred since the impedance match at both ends will absorb any reflections. However, when double termination is used, the received signal is halved; therefore a gain of 2 configuration is typically used to compensate for the attenuation. The EL2244C/EL2444C have been designed as an economical solution for applications requiring low video distortion. They have been thoroughly characterized for video performance in the topology described above, and the results have been included as typical dG and dP specifications and as typical performance curves. In a gain of +2, driving 150, with standard video test levels at the input, the EL2244C/EL2444C exhibit dG and dP of only 0.04% and 0.15 at NTSC and PAL. Because dG and dP can vary with different DC offsets, the video performance of the EL2244C/EL2444C has been 11 Capacitive Loads For ease of use, the EL2244C/EL2444C have been designed to drive any capacitive load. However, the EL2244C/EL2444C remain stable by automatically reducing their gain-bandwidth product as capacitive load increases. Therefore, for maximum bandwidth, capacitive loads should be reduced as much as possible or isolated via a series output resistor (Rs). Similarly, coax lines can be driven, but best AC performance is obtained when they are terminated with their characteristic impedance so that the capacitance of the coaxial cable will not add to the capacitive load seen by the amplifier. Although stable with all capacitive loads, some peaking still occurs as load capacitance increases. A series resistor at the output of the EL2244C/EL2444C can be used to reduce this peaking and further improve stability. Printed-Circuit Layout The EL2244C/EL2444C are well behaved, and easy to apply in most applications. However, a few simple techniques will help assure rapid, high quality results. As with any high-frequency device, good PCB layout is necessary for optimum performance. Ground-plane construction is highly recommended, as is good power supply bypassing. A 0.1 F ceramic capacitor is recommended for bypassing both supplies. Lead lengths should be as short as possible, and bypass capacitors should be as close to the device pins as possible. For EL2244C, EL2444C EL2244C, EL2444C Dual/Quad Low-Power 120MHz Unity-Gain Stable Op Amp good AC performance, parasitic capacitances should be kept to a minimum at both inputs and at the output. Resistor values should be kept under 5 k because of the RC time constants associated with the parasitic capacitance. Metal-film and carbon resistors are both acceptable, use of wire-wound resistors is not recommended because of their parasitic inductance. Similarly, capacitors should be low-inductance for best performance. The EL2244C/EL2444C Macromodel This macromodel has been developed to assist the user in simulating the EL2244C/EL2444C with surrounding circuitry. It has been developed for the PSPICE simulator (copywritten by the Microsim Corporation), and may need to be rearranged for other simulators. It approximates DC, AC, and transient response for resistive loads, but does not accurately model capacitive loading. This model is slightly more complicated than the models used for low-frequency op-amps, but it is much more accurate for AC analysis. The model does not simulate these characteristics accurately: noise settling-time CMRR PSRR non-linearities temperature effects manufacturing variations 12 EL2244C, EL2444C EL2244C, EL2444C Dual/Quad Low-Power 120MHz Unity-Gain Stable Op Amp EL2244C/EL2444 Macromodel * Connections: +input * | -input * | | +Vsupply * | | | -Vsupply * | | | | output * ||||| .subckt M2244 3 2 7 4 6 * * Input stage * ie 7 37 1mA r6 36 37 800 r7 38 37 800 rc1 4 30 850 rc2 4 39 850 q1 30 3 36 qp q2 39 2 38 qpa ediff 33 0 39 30 1.0 rdiff 33 0 1Meg * * Compensation Section * ga 0 34 33 0 1m rh 34 0 2Meg ch 34 0 1.3pF rc 34 40 1K cc 40 0 1pF * * Poles * ep 41 0 40 0 1 rpa 41 42 200 cpa 42 0 1pF rpb 42 43 200 cpb 43 0 1pF * * Output Stage * ios1 7 50 1.0mA ios2 51 4 1.0mA q3 4 43 50 qp q4 7 43 51 qn q5 7 50 52 qn q6 4 51 53 qp ros1 52 6 25 ros2 6 53 25 * * Power Supply Current * ips 7 4 2.7mA * * Models * .model qn npn(is=800E-18 bf=200 tf=0.2nS) .model qpa pnp(is=864E-18 bf=100 tf=0.2nS) .model qp pnp(is=800E-18 bf=125 tf=0.2nS) .ends 13 EL2244C, EL2444C EL2244C, EL2444C Dual/Quad Low-Power 120MHz Unity-Gain Stable Op Amp EL2244C/EL2444C Macromodel EL2244C/EL2444C Model 14 EL2244C, EL2444C EL2244C, EL2444C Dual/Quad Low-Power 120MHz Unity-Gain Stable Op Amp 15 EL2244C, EL2444C EL2244C, EL2444C Dual/Quad Low-Power 120MHz Unity-Gain Stable Op Amp General Disclaimer Specifications contained in this data sheet are in effect as of the publication date shown. Elantec, Inc. reserves the right to make changes in the circuitry or specifications contained herein at any time without notice. Elantec, Inc. assumes no responsibility for the use of any circuits described herein and makes no representations that they are free from patent infringement. WARNING - Life Support Policy September 26, 2001 Elantec Semiconductor, Inc. 675 Trade Zone Blvd. Milpitas, CA 95035 Telephone: (408) 945-1323 (888) ELANTEC Fax: (408) 945-9305 European Office: +44-118-977-6020 Japan Technical Center: +81-45-682-5820 16 Elantec, Inc. products are not authorized for and should not be used within Life Support Systems without the specific written consent of Elantec, Inc. Life Support systems are equipment intended to support or sustain life and whose failure to perform when properly used in accordance with instructions provided can be reasonably expected to result in significant personal injury or death. Users contemplating application of Elantec, Inc. Products in Life Support Systems are requested to contact Elantec, Inc. factory headquarters to establish suitable terms & conditions for these applications. Elantec, Inc.'s warranty is limited to replacement of defective components and does not cover injury to persons or property or other consequential damages. Printed in U.S.A. |
Price & Availability of EL2444CS
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |