View QRP-XC111_999248.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
QR/P SERIES PLUG-IN CRIMP CONNECTORS
General
QR/P series connectors have been developed for Plugin Connection Power and Signal Circuits in copier machine or other equipments which impose the connectors repeated insertion and extraction for maintenence work of them Available number of pins are 4, 8, 12, 16, and 24. Wire termination is done by crimping which offers higher reliability, Especially, the unique sexless contact assures soft and smooth coupling operation which is the most appropriate for Plug-in connection by machine itself.
Features
(1) The selective plating sexless contact is commonly used for plug and receptacle housings. (2) As QR/P series are crimp type connectors their housing and contacts are supplied separately. The sexless feature of the contact offers customers higer utilization and easier inventory control. (3) The two pairs of contacts at both ends are sequenced for power circuits. They are longer than the others. The molding material is UL94V-0 glass-reinforced polyester. (4) The Guide Pin is made of steel nickel plated to be strong enough against accidental coupling shock. (5) The mount of a receptacle housing is done through Floating Bushes. Thus, they may help to give smoother coupling of connectors by a self-adjusting function.
Applications
Main applications are PPC, Data Communications, Vending Machines, Instrument, Automatic Equipment, etc.
04/2009
139
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Material and Finish
U
Ordering Information
Connector Unit
(1)
(2) (3)
(4) (9)
Contact
(1)
(5) (4)
(6)(7)(8)
(1) Series Name (2) No.of Pin 4, 8, 12, 16, 24 (3) Type of Housing P: Plug Housing S: Receptacle Housing (4) Type of Termination C: Crimping (5) Sexless Contact (6) Contact Type 1: Loose Contact 2: Chain Contact (7) Applicable Wire 1: AWG # 14 - # 16 2: AWG # 18 - # 24 (8) Finish 1: Selective Gold over Nickel plating (9) UL, CSA, TUV Approved Spec.
140
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Plug Housing
Receptacle Housing
Sexless Crimp Contact
Note* Loose-piece terminals are available in packs. Each pack contains 100 terminals. Strip terminals are available in reels. Each reel contains QR/P-XC-221 Pin 3,500. QR/P-XC-221 Pin 5,000 terminals.
04/2009
141
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
How To Use Connectors
QR/P series connectors are primarily used in Plug-in Connection and the use is shown below.
Note: Determine the combinations with the panel so that the mating clearance between the P side and S side is 2 mm or less.
Recommended Mounting Hole (for S Insulation Case)
Note: Panel mounting dimensins for the P insulation case are symmetrical with request to the vertical axis, in relation to the S insulation case.
Tools
Hand Crimp Tool
Contact Extraction Tool
Auto Crimp Tool CM-105
142
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Assembling Procedure
After assembling, please make sure if the contact is installed as shown in the left by pulling the cable slightly.
Procedure for Contact Extraction
In case of extracting a contact from the housing in insertion error or in circuit change, follow the steps as shown below.
Fig. 1
Fig. 2
1. Hold the Contact Extractor, placing the tip of the Extractor on the tip of a contact, then insert it between the contact and the housing, following to the Fig. 1. 2. When the tip of the Extractor comes into contact with a stepped part in the housing, the spring will come off from the stepped part with a snap which is felt. Then, extract the contact by pulling the wire.
3. Above Fig. 1 and Fig. 2 show how to extract a contact from socket housing. The same procedure can be employed to extract a contact from pin housing. 4. When the extracted contact is installed again in the housing, do not forget to raise up the contact spring to the original position.
04/2009
143

▲Up To Search▲

Price & Availability of QRP-XC111

	To Download QRP-XC111 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .