m/a-com division of amp incorporated n north america: tel. (800) 366-2266, fax (800) 618-8883 n asia/paci?: tel. +85 2 2111 8088, fax +85 2 2111 8087 n europe: tel. +44 (1344) 869 595, fax +44 (1344) 300 020 www.macom.com amp and connecting at a higher level are trademarks. speci?ations subject to change without notice. 6-35 flatpack two-way power divider 5 - 1000 mhz dss/ds-327 v2.00 1 234 5 678 pin 0.015 dia 0.005 (0.038 0.13) 8 places 0.312 min typ (7.9 min) 0.385 0.020 (9.8 0.5) 0.080 (2.0) 0.100 (2.5) 0.250 (6.3) 0.350 (8.9) 0.51 (12.9 0.5) 0.150 max (3.8 max) 0.060 (1.5) fp-2 dimensions in ( ) are in mm. unless otherwise noted: .xxx = 0.010 (.xx = 0.25) .xx = 0.02 (.x = 0.5) weight (approx.): 0.09 ounces 2.5 grams features broadband, in phase divider low loss - 0.3 db typical amplitude balance - 0.05 db typical l l l operating characteristics typical performance ordering information mil-std-883 screening available. * all speci?ations apply with 50 ohm source and load impedance. guaranteed speci?ations* (from - 55? to + 85?) part number ds-317 dss-307 frequency range 5-1000 mhz 5-1000 mhz insertion loss (less coupling) 5-500 mhz 0.5 db max 0.5 db max 500-1000 mhz 1.0 db max 1.0 db max isolation 5-500 mhz 25 db min 20 db min 500-1000 mhz 20 db min 16 db min amplitude balance 5-1000 mhz 0.2 db max 0.3 db max phase balance 5-500 mhz 2 max 2 max 500-1000 mhz 3 max 3 max vswr(all ports) 5-500 mhz 1:3:1 max 1:4:1 max 500-1000 mhz 1:5:1 max 1:6:1 max operating characteristics impedance 50 ohms nominal maximum power rating or input power 1 watt max internal load dissipation 0.05 watt max environmental mil-std-883 screening available. pin con?uration ds-327 ; p1, output 'c'; p4, output 'd'; p8 case and all other pins ground. dss-327 ; p1, output 'c'; p2, output 'd'; p4 p3 and case ground. *all speci?ations apply with 50 ohm source and load impedance. ordering information part number package ds-327 pin flatpack dss-327 surface mount see dss-313 for outline drawing
|
