ntc thermistors: type rl30 uncoated disc with radial leads description: point-matched disc thermistor with bare lead-wires. features: low cost solid state sensor standard resistance tolerances down to ?% high sensitivity to changes in temperature suitable for temperature measurement, control and compensation excellent mechanical strength wide operating temperature range: -50? to 150? suitable for pcb and probe mountings available in a wide range of material systems also available with epoxy coating. available on tape and reel to eia rs-468a for automatic insertion crown industrial estate, priorswood road 808 us highway 1 967 windfall road taunton, somerset ta2 8qy uk edison, new jersey 08817-4695 usa st. marys, pennsylvania 15857-3397 usa tel +44 (0) 1823 335200 tel +1 (732) 287 2870 tel +1 (814) 834 9140 fax +44 (0) 1823 332637 fax +1 (732) 287 8847 fax +1 (814) 781 7969 type number ro@25c (ohms) beta 25/85 material system rl3004-6.56-59-m rl3006-9.84-59-m rl3008-13.1-59-m rl3004-31.2-73-k rl3005-44.5-85-k rl3006-59.4-85-k rl3004-144-95-k rl3006-231-95-k rl3004-291-97-k rl3006-436-97-k rl3004-459-103-k rl3005-574-103-k rl3007-861-103-k 10 15 20 75 75 100 250 400 500 750 800 1k 1.5k 3096 3096 3096 3468 3772 3772 3965 3965 3972 3972 4073 4073 4073 b (in.) (mm.) d5.9 d5.9 d5.9 d7.3 d8.5 d8.5 d9.5 d9.5 d9.7a d9.7a d10.3 d10.3 d10.3 .130 .150 .170 .130 .140 .150 .130 .150 .130 .150 .130 .140 .160 3.30 3.81 4.32 3.30 3.56 3.81 3.30 3.81 3.30 3.81 3.30 3.56 4.06 t (sec.) 35 45 50 35 35 45 35 45 35 45 35 35 40 d (mw/k) 7.0 7.5 8.0 7.0 7.0 7.5 7.0 7.5 7.0 7.5 7.0 7.0 7.5 .320?max (8.1mm) 1.5?min (38mm) 24 awg tinned copper b thickness refer to table .25? (6.4mm) g
ntc thermistors: type rl30 uncoated disc with radial leads crown industrial estate, priorswood road 808 us highway 1 967 windfall road taunton, somerset ta2 8qy uk edison, new jersey 08817-4695 usa st. marys, pennsylvania 15857-3397 usa tel +44 (0) 1823 335200 tel +1 (732) 287 2870 tel +1 (814) 834 9140 fax +44 (0) 1823 332637 fax +1 (732) 287 8847 fax +1 (814) 781 7969 options: epoxy coated, add ??suffix to part number tape and reel, add ??suffix to part number other resistances in the range 10 to 40k available other resistance tolerances, tolerances at other temperatures tolerance codes: g = 2% j= 5% k = 10% l = 15% m= 20% alternative lead lengths, lead materials, insulations type number ro@25c (ohms) beta 25/85 rl3005-1100-120-k rl3006-1377-120-k rl3008-1652-120-k rl3004-2214-122-k rl3005-2768-122-k rl3006-5340-140-k rl3008-8010-140-k rl3004-7900-150-k rl3004-10.8k-138-k rl3006-10.5k-150-k rl3005-13.1k-155-k rl3006-16.2k-138-k rl3006-15.7k-155-k 2k 2.5k 3k 4k 5k 10k 15k 15k 20k 20k 25k 30k 30k 4356 4356 4356 4365 4365 4615 4615 4728 4561 4728 4783 4561 4783 b (in.) (mm.) d12.0 d12.0 d12.0 d12.2 d12.2 d14.0 d14.0 d15.0 d13.8 d15.0 d15.5 d13.8 d15.5 .140 .150 .170 .130 .140 .150 .170 .130 .130 .150 .140 .150 .150 3.56 3.81 4.32 3.30 3.56 3.81 4.32 3.30 3.30 3.81 3.56 3.81 3.81 material system t (sec.) 35 45 50 35 35 45 50 35 35 45 35 45 45 d (mw/k) 7.0 7.5 8.0 7.0 7.0 7.5 8.0 7.0 7.0 7.5 7.0 7.5 7.5 g
|
