dimensions part numbering guide lsw - 0805 - 3n3 m - t dimensions packaging style (length, width) b=bulk t=tape & reel (2500 pcs / reel) inductance code tolerance f=1%, g=2%, j=5%, k=10%, m=20% wound chip inductor (LSW-0805 series) features inductance range 2.8 nh to 820 nh tolerance 1%, 2%, 5%, 10%, 20% construction ceramic body with wire wound construction dimensions in mm specifications subject to change without notice. rev. 03/01 (not to scale) electrical specifications l code l (nh) l test freq (mhz) q min q test freq (mhz) srf min (mhz) rdc max (ohms) idc max (ma) 2n8 2.8 250 70 1500 7900 0.06 800 3n0 3.0 250 65 1500 7900 0.06 800 8n2 8.2 250 50 1000 4700 0.12 600 12n 12 250 50 500 4000 0.15 600 15n 15 250 50 500 3400 0.17 600 18n 18 250 50 500 3300 0.20 600 22n 22 250 55 500 2600 0.22 500 27n 27 250 55 500 2500 0.25 500 33n 33 250 60 500 2050 0.27 500 39n 39 250 60 500 2000 0.29 500 47n 47 200 60 500 1650 0.31 500 56n 56 200 60 500 1550 0.34 500 68n 68 200 60 500 1450 0.38 500 82n 82 150 65 500 1300 0.42 400 r10 100 150 65 500 1200 0.46 400 r12 120 150 50 250 1100 0.51 400 r15 150 100 50 250 920 0.56 400 r18 180 100 50 250 870 0.64 400 r22 220 100 50 250 850 0.70 400 3n3 3.3 250 50 1500 7900 0.08 600 5n6 5.6 250 65 1000 5500 0.08 600 6n8 6.8 250 50 1000 5500 0.11 600 7n5 7.5 250 50 1000 4500 0.14 600 10n 10 250 60 500 4200 0.10 600 24n 24 250 50 500 2000 0.22 500 36n 36 250 55 500 1700 0.27 500 43n 43 200 60 500 1650 0.34 500 91n 91 150 65 500 1200 0.48 400 r11 110 150 50 250 1000 0.48 400 r24 240 100 44 250 690 1.00 350 r27 270 100 48 250 650 1.00 350 r33 330 100 48 250 600 1.40 310 r39 390 100 48 250 560 1.50 290 r47 470 50 33 100 375 1.76 250 r56 560 25 23 50 340 1.90 230 r68 680 25 23 50 188 2.20 190 r82 820 25 23 50 215 2.35 180 0.51 overall 1.73 max 2.29 max 0.51 1.52 max 1.02 1.27 terminal terminal wraparound approx. 0.38 mm both ends 1.02 1.78 0.76 suggested pad layout tel 949-366-8700 fax 949-366-8707 web www.caliberelectronics.com caliber electronics inc. specifications subject to change * revision 3-2003
|
