introduction the new generation of din valve connectors with unsurpassed ip67 sealing performance and superior cable retention, designed to improve performance and reliability and reduce overall implied costs in hydraulic, pneumatic and electro magnetic devices. the brad ? product line extends its range by introducing the new generation of external thread, feld attachable din valve connectors. the mpm ? range of connectors conforms to industry standard en 175301-803 (formerly din43650). the din valve connector is designed to save time and money, while improving overall performance and reliability. this innovative design reduces the number of components, making it easier to assemble with fewer parts to stock. traditional connectors are supplied pre-assembled requiring the operator to disassemble the connector before terminating the cable. this new generation of connectors is supplied in single set or bulk components, reducing dis-assembly time and cost. the brad ? mpm ? products are recognised throughout the industry for their performance and reliability. the new generation design has an external nut to provide greater and consistent torque which ensures good cable retention, high reliability and together with the integrated front gasket, a sealing performance from dust and water to ip67. cable retention force is increased by up to 115% when compared with traditional internal nuts. traditional form a and b connectors require three different styles for pg7, pg9 and pg11cable. however, the new external nut design can accomodate both pg9 and pg11 cable and up to 9mm cable outer diameter and since one size fts all, the customer can reduce their connector inventory. molex new generation of din connectors is currently available in feld attachable form a and form b. form c is under development and will be released late 2009. features and bene fits appli cations ? unsurpassed ip67 sealing performance accomodates pg9, pg11 and up to 9mm cable ? outer diameter integrated front gasket within the housing ? ergonomic external nut design ? cable retention is increased by 115% compared ? with internal nut designs fewer components reduces customer inventory ? and simplifies assembly product is supplied in a ready-to-use condition ? which saves the customer an estimated 20 seconds dis-assembly time per connector industrial ? solenoid valves pneumatics ? hydraulics ? gas valves ? pressure switches ? transducers ? cylinders ? non automotive-transport garbage trucks ? on truck crane and lifting equipment ? ? used across all markets where signal and power connections are required to perform in a rugged environment brad ? mpm ? din valve connectors n ew generation 121201 din form a 121207 din form a+circuit 121202 din industrial form 121208 din industrial form+ circuit 121203 din form b 121209 din form b+circuit * din form c * din form micro * under d evelopment - r elease due late 2009
brad ? mpm ? din valve connectors n ew generation 121201 din form a 121207 din form a+circuit technical description en175301-803 (ex din 43650), form a 121201 - series c282/283 2/3 poles + ground 121207 - series s282 2 poles + ground electronic circuit* specifi cations reference information packaging: single pack or bulk components mechanical contact distance: 18 0,1 housing: glass-filled polyamide ? cable range: 4.00 to 9.00mm electrical voltage rating: ac max. 250v dc max. 300v max. current 16.0a contact resistance 4mohm max. conductor 1,5mm2/awg16 environmental protection class: ip67 en60529 gasket material: nitrile rubber: -40 to +90c silicon: -40 to +125c ordering inform ation * an extensive range of standard electronic circuit is available. for example led illuminating devices, vdr diodes to offer protection against overvoltage or peaks. c 2820 0n0 r number s of pole s colour gasket - scr ew 2 = 2 poles + ground 3 = 3 poles + ground n = b lac k gr ay r = integrated gas ke t in nitrile rubber + fixing scr ew ip67 s = integrated gasket in silicon + fixing screw ip67 g = t = transparent order (edp) n engineering n 1 21201 0003 types c = without circuit s = with circuit cn packaging cn = bulk packaging the order number shown is the equivalent of engineering number c28200n0rcn only
brad ? mpm ? din valve connectors n ew generation 121202 din industrial form 121208 din industrial form + circuit 121203 din form b 121209 din form b+circuit technical description industrial form: en175301-803 (ex din 43650), form b: 121202 - series c222 2 poles + ground 121208 - series s222 2 poles + ground electronic circuit* 121203 - series c922 2 poles + ground 121209 - series s922 2 poles + ground electronic circuit* m3 28,5 27 20,8 48 5,5 10 0,1 20,8 14,5 11 0,1 0,1 c 222 c 922 specifi cations reference information packaging: single pack or bulk components mechanical contact distance: 222 11 0,1 922 10 0,1 housing: glass-filled polyamide ? cable range: 4.00 to 9.00mm electrical voltage rating: ac max. 250v dc max. 300v max. current 16.0a contact resistance 4mohm max. conductor 1,5mm2/awg16 environmental protection class: ip67 en60529 gasket material: nitrile rubber: -40 to +90c silicon: -40 to +125c c 2220 0n0 r series colour gasket - scr ew 2 = i ndustrial form 9 = din 43650, form b (not available with integrated gasket) n = b lac k gr ay r = integrated gas ke t in nitrile rubber + fixing scr ew ip67 (not available for model c922) s = integrated gasket in silicon + fixing screw ip67 (not available for model c922) g = t = transparent order (edp) n engineering n 12 120 20002 types c = without circuit s = with circuit cn packaging cn = bulk packaging the order number shown is the equivalent of engineering number c22200n0rcn only ordering inform ation * an extensive range of standard electronic circuit is available. for example led illuminating devices, vdr diodes to offer protection against overvoltage or peaks.
www.molex.com/link/dinvalve.html americas lisle illinois 60532 u.s.a. +1-800-78molex amerinfo@molex.com a sia pacific north yamato, kanagawa, japan +84-46-265-2325 apninfo@molex.com asia pacific south jurong, singapore +65-6268-6868 apsinfo@molex.com europe walldorf, germany +49 6227-3091-0 mxgermany@molex.com corporate headquarters 2222 wellington ct. lisle, il 60532 u.s.a. +630-969-4550 order no. 987650-2971 europe/bvo/09.03 ? 2009, molex brad ? mpm ? din valve connectors n ew generation - under development available late 2009 din form c din form c+circuit din form micro din form micro+ circuit technical description en175301-803 (ex din 43650), form c: series c252/253 2/3 poles + ground series s252 2 poles + ground electronic circuit* series c292/293 2/3 poles + ground series s292 2 poles + ground electronic circuit* 15,5 m3 15,5 26 (1) 32 4 15,5 c 293 c253 a b a b specifi cations reference information packaging: single pack or bulk components mechanical contact distance: 252/253 8 0,1 292/293 9,4 0,1 housing: glass-filled polyamide ? cable range: 3.00 to 5,5mm electrical voltage rating: ac max. 250v dc max. 300v max. current 10.0a contact resistance 4mohm max. conductor 0,75mm2/awg18 environmental protection class: ip67 en60529 gasket material: nitrile rubber: -40 to +90c silicon: -40 to +125c * an extensive range of standard electronic circuit will be available. for example led illuminating devices, vdr diodes to offer protection against over voltage or peaks. note a 8mm contact distance b 9,4mm contact distance (1) 26mm height 30% increase in the internal volume, previous height was 23,5mm of the housings im - proves handling, wire routing and speed of assembly. as the housing does not protrude past the toe of the nut, the external ?volume has not increased and thus has no impact on the customer application
|
