Part Number Hot Search : 
82000 H3900 50P03 CC9318P EL7144 BUW12W 3KA18 E2955
Product Description
Full Text Search
 

To Download LUY3333R-H28-PF Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  pb lead-free parts luy3333r/h28-pf doc. no : qw0905-luy3333r/h28-pf rev. : a date : 05 - mar. - 2007 super bright round type led lamps ligitek electronics co.,ltd. property of ligitek only data sheet
5.9 5.0 1.5max 8.6 7.6 1.0min 2.54typ + - 25.0min 0.5 typ part no. luy3333r/h28-pf page 1/5 package dimensions ligitek electronics co.,ltd. property of ligitek only directivity radiation note : 1.all dimension are in millimeter tolerance is 0.25mm unless otherwise noted. 2.specifications are subject to change without notice. 75% 100% -60 -30 25% 50% 025% 0 30 60 100% 75% 50%
2/5 20 1.72.6 yellow algainp luy3333r/h28-pf water clear color lens material part no emitted 4000 luminous intensity @20ma(mcd) typ. 20 spectral halfwidth nm 590 dominant wave length dnm max. forward voltage @ ma(v) min. 2200 min. viewing angle 2 1/2 (deg) 30 page ligitek electronics co.,ltd. property of ligitek only unit ma ma a v mw 50 90 uy(r) ratings 10 2000 ir -40 ~ +85 -40 ~ +100 120 forward current peak forward current duty 1/10@10khz parameter operating temperature storage temperature electrostatic discharge( * ) reverse current @5v power dissipation typical electrical & optical characteristics (ta=25 ) symbol esd t opr tstg i f pd i fp absolute maximum ratings at ta=25 note : 1.the forward voltage data did not including 0.1v testing tolerance. 2. the luminous intensity data did not including 15% testing tolerance. static electricity or power surge will damage the led. use of a conductive wrist band or anti-electrosatic glove is recommended when handing these led. all devices, equipment and machinery must be properly grounded. * part no. luy3333r/h28-pf
fig.3 forward voltage vs. temperature fig.5 relative intensity vs. wavelength ambient temperature( ) r e l a t i v e i n t e n s i t y @ 2 0 m a wavelength (nm) f o r w a r d v o l t a g e @ 2 0 m a n o r m a l i z e @ 2 5 fig.4 luminous intensity vs. temperature ambient temperature( ) l u m i n o u s i n t e n s i t y @ 2 0 m a n o r m a l i z e @ 2 5 typical electro-optical characteristics curve forward voltage(v) fig.1 forward current vs. forward voltage f o r w a r d c u r r e n t ( m a ) forward current(ma) l u m i n o u s i n t e n s i t y n o r m a l i z e @ 2 0 m a ligitek electronics co.,ltd. property of ligitek only 0 0 50 100 150 050100150 0.0 1.0 2.0 3.0 -40-200204060 0.51.01.52.0 80100 0.94 -20 -4040 20 080100 60 0.0 0.5 1.5 1.0 uyr chip page 3/5 fig.2 luminous intensity vs. forward current 5.0 4.0 2.53.0 0.96 0.98 1.00 1.02 1.04 1.06 500 0.0 0.5 550 600 650 1.0 part no. luy3333r/h28-pf
note:1.wave solder should not be made more than one time. 2.you can just only select one of the soldering conditions as above. dip soldering preheat: 120 c max preheat time: 60seconds max ramp-up 2 c/sec(max) ramp-down:-5 c/sec(max) solder bath:260 c max dipping time:3 seconds max distance:2mm min(from solder joint to body) 2.wave soldering profile soldering condition(pb-free) 1.iron: soldering iron:30w max temperature 350 c max soldering time:3 seconds max(one time only) distance:2mm min(from solder joint to body) ligitek electronics co.,ltd. property of ligitek only page 4/5 0 preheat 0 25 2 /sec max 100 50 150 time(sec) temp( c) 120 260 5 /sec max 260 c3sec max part no. luy3333r/h28-pf
description the purpose of this is the resistance of the device which is laid under condition of low temperature for hours. the purpose of this is the resistance of the device which is laid under condition of high temperature for hours. this test is conducted for the purpose of detemining the resistance of a part in electrical and themal stressed. ligitek electronics co.,ltd. property of ligitek only the purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. this test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. the purpose of this test is the resistance of the device under tropical for hours. this test intended to see soldering well performed or not. 1.t.sol=230 5 2.dwell time=5 1sec solderability test 1.ta=105 5 2.t=1000 hrs (-24hrs, +72hrs) 1.ta=-40 5 2.t=1000 hrs (-24hrs, +72hrs) 1.ta=65 5 2.rh=90%~95% 3.t=240hrs 2hrs 1.ta=105 5 &-40 5 (10min) (10min) 2.total 10 cycles 1.t.sol=260 5 2.dwell time= 10 1sec. high temperature high humidity test solder resistance test thermal shock test low temperature storage test high temperature storage test test condition 1.under room temperature 2.if=20ma 3.t=1000 hrs (-24hrs, +72hrs) reliability test: operating life test test item mil-std-202: 208d mil-std-750: 2026 mil-std-883: 2003 jis c 7021: a-2 mil-std-202:103b jis c 7021: b-11 mil-std-202: 210a mil-std-750: 2031 jis c 7021: a-1 mil-std-202: 107d mil-std-750: 1051 mil-std-883: 1011 jis c 7021: b-12 mil-std-883:1008 jis c 7021: b-10 mil-std-750: 1026 mil-std-883: 1005 jis c 7021: b-1 reference standard 5/5 page part no. luy3333r/h28-pf


▲Up To Search▲   

 
Price & Availability of LUY3333R-H28-PF

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X