d a t a sh eet supersedes data of september 2004 2008 sep 01 ferroxcube rm6r rm, rm/i, rm/ilp cores and accessories
2008 sep 01 1202 ferroxcube rm, rm/i, rm/ilp cores and accessories rm6r core sets effective core parameters symbol parameter value unit (i/a) core factor (c1) 0.810 mm ? 1 v e effective volume 810 mm 3 i e effective length 25.6 mm a e effective area 32.0 mm 2 a min minimum area 23.8 mm 2 m mass of set 4.5 g handbook, halfpage cbw128 2.9 12.4 0.1 10.35 0.2 2.3 m1.7 ? 3 + 0.1 0 ? 12.4 + 0.5 0 8 + 0.4 0 14.7 0 ? 0.6 7.4 0 ? 0.4 17.9 0 ? 0.7 ? 6.4 0 ? 0.2 fig.1 rm6r core set. dimensions in mm. core sets for filter applications clamping force for a l measurements, 40 20 n. grade a l (nh) e total air gap ( m) type number (with nut) type number (without nut) 3d3 40 3% 26 1200 rm6r-3d3-e40/n rm6r-3d3-e40 63 3% 41 700 rm6r-3d3-e63/n rm6r-3d3-e63 100 3% 65 400 RM6R-3D3-E100/n RM6R-3D3-E100 160 3% 103 200 rm6r-3d3-a160/n rm6r-3d3-a160 1000 25% 650 0 ? rm6r-3d3 3h3 160 3% 103 230 rm6r-3h3-a160/n rm6r-3h3-a160 250 3% 161 110 rm6r-3h3-a250/n rm6r-3h3-a250 315 3% 203 90 rm6r-3h3-a315/n rm6r-3h3-a315 400 3% 258 70 rm6r-3h3-a400/n rm6r-3h3-a400 2200 25% 1420 0 ? rm6r-3h3
2008 sep 01 1203 ferroxcube rm, rm/i, rm/ilp cores and accessories rm6r inductance adjuster general data parameter specification material of head and thread polypropylene (pp), glass fibre reinforced maximum operating temperature 125 c handbook, halfpage mgc079 9.5 3.4 m 1.7 3.13 o 0.07 0 2.4 min 0.7 fig.2 rm6r inductance adjuster. dimensions in mm. inductance adjuster selection chart (applies to all types) note 1. maximum adjustment range. grade a l (nh) types for low adjustment ? l/l (1) % types for medium adjustment ? l/l (1) % types for high adjustment ? l/l (1) % 3h3 40 ??? ? adj-rm6-green 20 63 ?? adj-rm6-green 14 adj-rm6-red 22 100 adj-rm6-green 10 adj-rm6-red 16 ?? 160 adj-rm6-green 6 adj-rm6-red 10 adj-rm6-white 19 200 adj-rm6-red 8 adj-rm6-white 15 adj-rm6-violet 18 250 adj-rm6-white 12 adj-rm6-violet 14 adj-rm6-brown 20 315 adj-rm6-white 9 adj-rm6-brown 15 adj-rm6-black 22 400 adj-rm6-violet 8 adj-rm6-black 16 adj-rm6-grey 30 630 adj-rm6-black 9 adj-rm6-grey 15 ?? 1000 adj-rm6-black 5 adj-rm6-grey 8 ?? 1250 ?? adj-rm6-grey 5 ?? 3d3 40 ??? ? adj-rm6-green 20 63 ?? adj-rm6-green 14 adj-rm6-red 23 100 adj-rm6-green 9 adj-rm6-red 16 adj-rm6-white 28 160 adj-rm6-red 10 adj-rm6-white 17 ??
2008 sep 01 1204 ferroxcube rm, rm/i, rm/ilp cores and accessories rm6r coil formers general data parameter specification coil former material phenolformaldehyde (pf), glass-reinforced, flame retardant in accordance with ?ul 94v-0? ; ul file number e167521(m) pin material copper-tin alloy (cusn), tin (sn) plated maximum operating temperature 180 c, ?iec 60085? , class h resistance to soldering heat ?iec 60068-2-20? , part 2, test tb, method 1b, 350 c, 3.5 s solderability ??iec 60068-2-20? , part 2, test ta, method 1 handbook, full pagewidth mgc080 2.54 1 0.15 0 0.75 0.8 0 0.1 7.8 0 0.15 (6.4 min) 0.4 0.6 o 5.2 0.4 7.45 o 0 0.2 12.3 o 0 0.2 7.62 1.6 12.7 3 4 2 1 8.6 6.5 0.15 0 5.7 max 1.4 min fig.3 rm6r coil former; 4-pins. dimensions in mm. winding data and area product for 4-pins rm6r coil former number of sections number of pins pin positions used average length of turn (mm) winding area (mm 2 ) winding width (mm) area product ae x aw (mm 4 ) type number 1 4 all 30 15 6.4 480 csv-rm6s/r-1s-4p 24all302 7.0 2 3.0 2 x 224 csv-rm6s/r-2s-4p
2008 sep 01 1205 ferroxcube rm, rm/i, rm/ilp cores and accessories rm6r handbook, full pagewidth mgc081 2.54 1 0.15 0 0.75 0.8 0 0.1 7.8 0 0.15 (6.4 min) 0.7 min 0.4 0.6 5.2 0.4 7.45 o 0 0.2 12.3 0 0.2 7.62 1.6 12.7 8.6 6.5 0.15 0 5.7 max o 3 4 5 2 1 6 fig.4 rm6r coil former; 6-pins. dimensions in mm. winding data and area product for 6-pins rm6r coil former number of sections number of pins pin positions used average length of turn (mm) winding area (mm 2 ) winding width (mm) area product ae x aw (mm 4 ) type number 1 6 all 30 15 6.4 480 csv-rm6r-1s-6p 26all302 7.0 2 3.0 2 x 224 csv-rm6r-2s-6p mounting parts general data item specification clamping force 20 n clip material steel clip plating silver (ag) solderability ?iec 60 068-2-20? , part 2, test ta, method 1 type number cli/p-rm6 handbook, halfpage mgc082 12 9.8 4.5 0.7 1.6 2.3 fig.5 mounting clip for rm6r. dimensions in mm.
2008 sep 01 1206 ferroxcube rm, rm/i, rm/ilp cores and accessories rm6r data sheet status definitions disclaimer life support applications ? these products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify ferroxcube for any damages resulting from such application. product status definitions data sheet status product status definitions preliminary specification development this data sheet contains prelimin ary data. ferroxcube reserves the right to make changes at any time without not ice in order to improve design and supply the best possible product. product specification production this data sheet contains final specifications. ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. status indication definition prototype these are products that have been made as development samples for the purposes of technical evaluation only. the data for these types is provisional and is subject to change. design-in these products are recommended for new designs. preferred these products are recommended for use in current designs and are available via our sales channels. support these products are not recommended for new designs and may not be available through all of our sales channels. customers are advised to check for availability.
|
