marl optosource ? fax: +44 (0)1229 580012 ? email: sales@optosource.com ? website: www.optosource.com ? telephone +44 (0)1229 582430 mlq = 50 (2.5) ? 4.0 ? 4.7 1.0 cathode 14.5 0.5 1.0 ? 5.4 ? 0.5 cathode anode 0.4 3.6 0.4 dimensions in mm (typical) tolerance +/- 0.2 uos not to scale 260019 series part number colour typ. fwd max fwd forward max rev optical spectrum viewing voltage voltage current current power half width angle v f @ i opr v f @ i opr l opr i r (v r =5v) po dl 2 q 1 / 2 standard intensity - 260019 ultra-violet 3.9 10 85 1 12 110 units water clear v v ma m a mw nm deg ? wide viewing angle ? 370nm peak wavelength ? also available in ball lens style (part no 260018) discrete leds - ? 5mm ultra-violet ordering information & typical technical characteristics (ta = 25c) mean time between failure = 100,000 hours. * duty cycle <=1/10, pulse width <= 10msec datasheet reference 30/99 issue 02 part number colour forward peak fwd reverse power peak operating storage current current voltage dissipation wavelength temp temp i opr max i fp * vr max p d max typ. l p t opr t stg standard intensity - 260019 ultra-violet 15 30 60 370 -30 to +80 -40 to +100 units water clear ma ma vdc mw nm c c precautions for handling electrostatic sensitive leds static electricity and surge static electricity and surge will damage the led and a high standard of care must be taken during handling. it is recommended that a wristband, conductive mat or anti-electrostatic glove is used when handling the leds. all devices, equipment (e.g. soldering iron points) and machinery must be properly grounded. safety precautions for handling high brightness leds invisible laser radiation : avoid direct eye exposure to uv light please refer to european standard bsen 100015-1 1992 for further information. ? marl optosource 2000 optical / electrical characteristics (t a = 25 o c) absolute maximum ratings (t a = 25 o c)
|
