document number: 94647 for technical questions, contact: diodes-tech@vishay.com www.vishay.com revision: 04-may-09 1 high performance schottky generation 5.0, 10 a 10ut10, 10WT10FN vishay high power products features ? 175 c high performance schottky diode ? very low forward voltage drop ? extremely low reverse leakage ? optimized v f vs. i r trade off for high efficiency ? increased ruggedness for reverse avalanche capability ? rbsoa available ? negligible switching losses ? submicron trench technology ? compliant to rohs directive 2002/95/ec ? aec-q101 qualified applications ? high efficiency smps ? automotive ? high frequency switching ? output rectification ? reverse battery protection ? freewheeling ? dc-to-dc systems ? increased power density systems product summary i f(av) 10 a v rrm 100 v maximum v f at 10 a at 125 c 0.66 v i-pak (to-251aa) 10ut10 10WT10FN d-pak (to-252aa) base cathode anode anode cathode 4 3 2 1 base cathode anode anode cathode 4 3 2 1 major ratings and characteristics symbol characteristics values units v rrm 100 v v f 10 apk, t j = 125 c (typical) 0.615 v t j range - 55 to 175 c voltage ratings parameter symbol test conditions 10ut10 10WT10FN units maximum dc reverse voltage v r t j = 25 c 100 v
www.vishay.com for technical questions, contact: diodes-tech@vishay.com document number: 94647 2 revision: 04-may-09 10ut10, 10WT10FN vishay high power products high performance schottky generation 5.0, 10 a note (1) measured connecting 2 anode pins notes (1) pulse width < 300 s, duty cycle < 2 % (2) only 1 anode pin connected absolute maximum ratings parameter symbol test conditions values units maximum average forward current i f(av) 50 % duty cycle at t c = 159 c, rectangular waveform 10 a maximum peak one cycle non-repetitive surge current i fsm 5 s sine or 3 s rect. pulse following any rated load condition and with rated v rrm applied 610 a 10 ms sine or 6 ms rect. pulse 110 non-repetitive avalanche energy e as t j = 25 c, i as = 3 a, l = 12 mh 54 mj repetitive avalanche current i ar limited by frequency of operation and time pulse duration so that t j < t j max. i as at t j max. as a function of time pulse (see fig. 8) i as at t j max. a electrical specifications parameter symbol test conditions typ. max. units forward voltage drop v fm (1)(2) 5 a t j = 25 c 0.630 - v 10 a 0.735 0.810 20 a 0.840 0.890 5 a t j = 125 c 0.530 - 10 a 0.615 0.660 20 a 0.730 0.770 reverse leakage current i rm (1) t j = 25 c v r = rated v r -50a t j = 125 c - 4 ma junction capacitance c t v r = 5 v dc (test signal range 100 khz to 1 mhz), 25 c 400 - pf series inductance l s measured lead to lead 5 mm from package body 8.0 - nh maximum voltage rate of change dv/dt rated v r - 10 000 v/s thermal - mechanical specifications parameter symbol test conditions values units maximum junction and storage temperature range t j , t stg - 55 to 175 c maximum thermal resistance, junction to case r thjc dc operation 2 c/w typical thermal resistance, case to heatsink r thcs 0.3 approximate weight 0.3 g 0.01 oz. marking device case style i-pak 10ut10 case style d-pak 10WT10FN
document number: 94647 for technical questions, contact: diodes-tech@vishay.com www.vishay.com revision: 04-may-09 3 10ut10, 10WT10FN high performance schottky generation 5.0, 10 a vishay high power products fig. 1 - maximum forward voltage drop characteristic s fig. 2 - typical values of reverse current vs. reverse voltage fig. 3 - typical junction capacitance vs. reverse voltage fig. 4 - maximum thermal impedance z thjc characteristics i f - instantaneous forward current (a) v fm - forward volta g e drop (v) 0.2 0.4 0.6 0. 8 1.0 1.2 1.6 1.4 1. 8 1 100 10 t j = 25 c t j = 125 c t j = 175 c i r - reverse current (ma) v r - reverse volta g e (v) 0204060 8 0100 0.0001 0.001 0.01 0.1 1 10 100 25 c 175 c 150 c 125 c 100 c 75 c 50 c c t - junction capacitance (pf) v r - reverse volta g e (v) 02040 8 0 60 100 10 1000 100 0.01 0.1 1 10 0.00001 0.0001 0.001 0.01 0.1 t 1 - rectan g ular pulse duration (s) z thjc - thermal impedance (c/w) 1 single p u lse (thermal resistance) d = 0.75 d = 0.50 d = 0.33 d = 0.25 d = 0.20
www.vishay.com for technical questions, contact: diodes-tech@vishay.com document number: 94647 4 revision: 04-may-09 10ut10, 10WT10FN vishay high power products high performance schottky generation 5.0, 10 a fig. 5 - maximum allowable case temperature vs. average forward current fig. 6 - forward power loss characteristics fig. 7 - maximum non-repetitive surge current note (1) formula used: t c = t j - (pd + pd rev ) x r thjc ; pd = forward power loss = i f(av) x v fm at (i f(av) /d) (see fig. 6); pd rev = inverse power loss = v r1 x i r (1 - d); i r at v r1 = 80 % rated v r allowable case temperature (c) i f(av) avera g e forward current (a) 8 6 4 212 10 14 16 0 165 175 1 8 0 145 155 160 170 150 s qu are w a v e (d = 0.50) 8 0 % rated v r applied see note (1) dc avera g e power loss (w) i f(av) - avera g e forward current (a) 12 9 6 3 15 0 8 10 0 4 6 2 1 8 0 120 90 60 30 rms limit dc i fsm - non-repetitive sur g e current (a) t p - square wave pulse duration (s) 10 100 1000 10 000 10 1000 100
document number: 94647 for technical questions, contact: diodes-tech@vishay.com www.vishay.com revision: 04-may-09 5 10ut10, 10WT10FN high performance schottky generation 5.0, 10 a vishay high power products fig. 8 - reverse bias safe operating area (avalanche current vs. rectangular pulse duration) fig. 9 - reverse bias safe operating area (avalanche energy vs. re ctangular pulse duration) 1 10 100 110 rectan g ular pulse duration (s) avalanche current (a) 100 t j = 25 c t j = 125 c t j = 175 c 1 10 100 110 rectan g ular pulse duration (s) avalanche ener g y (mj) 100 t j = 25 c t j = 125 c t j = 175 c
www.vishay.com for technical questions, contact: diodes-tech@vishay.com document number: 94647 6 revision: 04-may-09 10ut10, 10WT10FN vishay high power products high performance schottky generation 5.0, 10 a ordering information table 1 - current rating (10 a) 2 - package: u = i-pak w = d-pak 3 - t = trench 4 - voltage code (100 v) device code 5 13 24 6 10 u t 10 fn trl 6 - d-pak, i-pak: none = tube (75 pieces) d-pak only: tr = tape and reel trl = tape and reel (left oriented) trr = tape and reel (right oriented) 5 - to-252aa (d-pak) links to related documents dimensions www.vishay.com/doc?95024 part marking information www.vishay.com/doc?95025 packaging information www.vishay.com/doc?95033 spice model www.vishay.com/doc?95026
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
