Part Number Hot Search : 
2N5446 CZMK20V W91414A F1762 ST2245 1N2793 001456 MC140
Product Description
Full Text Search
 

To Download SP8610 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  obsolescence notice this product is obsolete. this information is available for your convenience only. for more information on zarlink?s obsolete products and replacement product lists, please visit http://products.zarlink.com/obsolete_products/
this document is for maintenance purposes only and is not recommended for new designs
SP8610 1000mhz 4 4 4 4 4 4 sp8611 1300/1500mhz 4 4 4 4 4 4 ds3661-12 the SP8610 and sp8611 are asynchronous ecl divide by four circuits with ecl compatible outputs which can also be used to drive 100 w lines. they feature input sensitivities of 600mv p-p (800mv p-p above 1300mhz). features n ecl compatible outputs n ac-coupled inputs (internal bias) quick reference data n supply voltage: 2 52v n power consumption: 380mw n max. input frequency: 1500mhz (sp8611b) n temperature range: a grade: 2 55 c to 1 110 c ( 1 125 c with suitable heat sink) b grade: 0 c to 1 70 c fig. 1 pin connections - top view dg14 absolute maximum ratings supply voltage, v ee output current storage temperature range max. junction temperature max. clock input voltage ordering information SP8610 a dg SP8610 b dg SP8610 aa dg SP8610 na 1c sp8611 a dg sp8611 b dg sp8611 aa dg sp8611 na 1c v cc (0v) nc nc output output nc nc nc nc nc clock input nc internal bias decoupling v ee 1 2 3 4 5 6 7 14 13 12 11 10 9 8 SP8610 sp8611 internal bias decoupling 6 output output 11 10 divide by 2 clock input 4 divide by 2 v ee 7 v cc (0v) 14 fig. 2 functional diagram 2 8v 15ma 2 65 c to 1 150 c 1 175 c 25v p-p advance information
2 SP8610/11 maximum frequency (sinewave input) minimum frequency (sinewave input) current consumption output low voltage output high voltage minimum output swing f max f min i ee v ol v oh v out 10 13 15 2 192 2 093 500 min. max. 150 100 2 162 2 075 value notes ghz ghz ghz mhz ma v v mv 6 6 6 4 5 5 input = 400-1200mv p-p input = 800-1200mv p-p input = 400-1200mv p-p input = 600-1200mv p-p v ee = 2 545v, outputs unloaded v ee = 2 52v, r l = 430 w (25 c) v ee = 2 52v, r l = 430 w (25 c) v ee = 2 52v, r l = 430 w electrical characteristics unless otherwise stated, the electrical characteristics are guaranteed over specified supply, frequency and temperature range supply voltage, v cc = 0v, v ee = 2 52v 6 025v temperature, t amb = 2 55 c to 1 125 c (a grade) (note 1), 0 c to 1 70 c (b grade) conditions units symbol characteristic type sp8605a,b sp8606a sp8606b all all all all all notes 1. the a grade devices must be used with a heat sink to maintain chip temperature below 1 150 c when operating in a t amb of 1 125 c. 2. the temperature coefficients of v oh = 1 12mv/ c, and v ol = 1 024mv/ c but these are not tested. 3. the test configuration for dynamic testing is shown in fig.5. 4. tested at 25 c and 1 125 c only ( 1 70 c for b grade). 5. tested at 25 c only 6. tested at 1 125 c only ( 1 70 c for b grade). fig. 3 typical input characteristic of sp8611 thermal characteristics u jc approximately 30 c/w u ja approximately 110 c/w operating notes 1. the clock input (pin 4) should be capacitively coupled to the signal source. the input signal path is completed by connecting a capacitor from the internal bias decoupling, pin 6, to ground. 2. in the absence of a signal the device will self-oscillate. if this is undesirable, it may be prevented by connecting a 10k w resistor from the unused input to v ee i.e. from pin 4 to pin 7. this will reduce the input sensitivity by approximately 100mv. 3. the circuit will operate at very low input frequencies but slew rate must be better than 200v/ m s. 4. the input impedance of the SP8610/11 is a function of frequency, see fig. 4. 5. the emitter follower outputs require external load resistors. these should not be less than 330 w and a value of 430 w is recommended. interfacing to ecllll/10k is shown in fig. 7. 6. these devices may be used with split suopply lines and ground referenced input; a suitable configuration is shown in fig. 6. 7. all components should be suitable for the frequency in use. 1400 1200 1000 800 600 400 200 0 0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 input frequency (mhz) input amplitude (mv p-p) * tested as specified in table of electrical characteristics guaranteed * operating window sp8611a sp8611b t case = 2 55 c t case = 1 70 c t case = 1 125 c
3 SP8610/11 fig. 4 typical input impedance. test conditions: supply voltage = 2 52v, ambient temperature = 25 c, frequencies in mhz, impedances normalised to 50 w fig. 5 toggle frequency test circuit fig. 6 circuit for using the input signal about ground potential dut 50 50 1n 1n 50 w line to scope v ee = 2 52v 6 025v 14 11 10 7 6 4 10n 1n 10n 33 20 monitor 50 w signal source 33 2 5db attenuator network 430 430 v cc = 0v dut 50 50 1n 1n output v ee = 2 22v 14 11 10 7 6 4 10n 50 50 w signal source 430 430 1 3v 10n output j 2 j 1 j 0.5 j 0.2 0 2 j 0.2 2 j 0.5 2 j 1 2 j 2 1 0.5 0.2 j 5 2 j 5 2 5 900 600 800 700 500 1000 1100 1200 1300 1400 1500
4 SP8610/11 fig. 7 interfacing SP8610/11 to ecl10k and ecllll fig. 8 typical application showing interfacing SP8610/11 2 52v 430 430 v cc = 0v ecllll ecl10k SP8610/11 2 52v 15k 0v ecllll ecl10k 47 q q low power interfacing 10 11 7 400 4 6 14 bias ecl output 430 1n 1n 1n 430 2 52v input divide by 4
5 SP8610/11 notes
6 SP8610/11 headquarters operations gec plessey semiconductors cheney manor, swindon, wiltshire sn2 2qw, united kingdom. tel: (0793) 518000 fax: (0793) 518411 gec plessey semiconductors p.o. box 660017 1500 green hills road, scotts valley, ca95067-0017 united states of america. tel (408) 438 2900 fax: (408) 438 5576 customer service centres l france & benelux les ulis cedex tel: (1) 64 46 23 45 fax : (1) 64 46 06 07 l germany munich tel: (089) 3609 06-0 fax : (089) 3609 06-55 l italy milan tel: (02) 66040867 fax: (02) 66040993 l japan tokyo tel: (3) 5276-5501 fax: (3) 5276-5510 l north america scotts valley, usa tel: (408) 438 2900 fax: (408) 438 7023. l south east asia singapore tel: (65) 3827708 fax: (65) 3828872 l sweden stockholm tel: 46 8 702 97 70 fax: 46 8 640 47 36 l uk, eire, denmark, finland & norway swindon tel: (0793) 518510 fax : (0793) 518582 these are supported by agents and distributors in major countries world-wide. ? gec plessey semiconductors 1994 publication no. ds3661 issue no. 1.2 march 1994 this publication is issued to provide information only which (unless agreed by the company in writing) may not be used, applied or reproduced for any purpose nor form part of any order or contract nor to be regarded as a representation relating to the products or services concerned. no warranty or guarantee express or implied is made regard ing the capability, performance or suitability of any product or service. the company reserves the right to alter without prior knowledge the specification, design or price of any product or service. information concerning possible methods of use is provided as a guide only and does not constitute any guarantee that such methods of use will be satisfactory in a specific piece of equipment. it is the user's responsibility to fully determine the performance and suitability of any equipment using such information and to ensure that any publication or data used is up to date and has not been superseded. these products are not suitable for use in any medical products whose failure to perform may result in significant injury or death to the user. all products and materials are sold and services provided subject to the company's conditions of sale, w hich are available on request. package details dimensions are shown thus: mm (in). 051 (002) min 14 leads at 254 (010) nom. spacing 036/058 (0014/023) 2032 (0800) max 559/787 (0220/0310) 14-lead ceramic dil C dg14 1 14 318/406 (0125/0160) pin 1 ref notch 020/036 (0008/0014) 762 (03) nom ctrs 508/(020) max 114/165 (0045/0065) seating plane notes 1. controlling dimensions are inches. 2. this package outline diagram is for guidance only. please contact your gps customer service centre for further information.
www.zarlink.com information relating to products and services furnished herein by zarlink semiconductor inc. or its subsidiaries (collectively ?zarlink?) is believed to be reliable. however, zarlink assumes no liability for errors that may appear in this publication, or for liability otherwise arising from t he application or use of any such information, product or service or for any infringement of patents or other intellectual property rights owned by third parties which may result from such application or use. neither the supply of such information or purchase of product or service conveys any license, either express or implied, u nder patents or other intellectual property rights owned by zarlink or licensed from third parties by zarlink, whatsoever. purchasers of products are also hereby notified that the use of product in certain ways or in combination with zarlink, or non-zarlink furnished goods or services may infringe patents or other intellect ual property rights owned by zarlink. this publication is issued to provide information only and (unless agreed by zarlink in writing) may not be used, applied or re produced for any purpose nor form part of any order or contract nor to be regarded as a representation relating to the products or services concerned. the products, t heir specifications, services and other information appearing in this publication are subject to change by zarlink without notice. no warranty or guarantee express or implied is made regarding the capability, performance or suitability of any product or service. information concerning possible methods of use is provided as a guide only and does not constitute any guarantee that such methods of use will be satisfactory in a specific piece of equipment. it is the user?s responsibility t o fully determine the performance and suitability of any equipment using such information and to ensure that any publication or data used is up to date and has not b een superseded. manufacturing does not necessarily include testing of all functions or parameters. these products are not suitable for use in any medical products whose failure to perform may result in significant injury or death to the user. all products and materials are sold and services provided subject to zarlink?s conditi ons of sale which are available on request. purchase of zarlink?s i 2 c components conveys a licence under the philips i 2 c patent rights to use these components in and i 2 c system, provided that the system conforms to the i 2 c standard specification as defined by philips. zarlink, zl and the zarlink semiconductor logo are trademarks of zarlink semiconductor inc. copyright zarlink semiconductor inc. all rights reserved. technical documentation - not for resale for more information about all zarlink products visit our web site at


▲Up To Search▲   

 
Price & Availability of SP8610

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X