part no.: btp5-99xxct-xx-x/w rev1.2005 page 1 of 7 pro lite 5w smd star btp5-99xxct-xx-x/w package dimension features ? highest lumen per watt ? long operational life ? white housing ? superior esd protection ? instant light (less than 100ns) ? compatible to luxeon?s ?lambertian? ? true smd emitter ? ir reflow soldering process applications ? accent light/down light/spot light ? automotive exterior/interior light ? large area lcd backlights ? marine/miner?s lighting ? portable flashlight/ general lighting note: lens is low dome profile tolerance: see spec unit: mm optical characteristics at t j =25oc, i f =700ma wavelength (nm) cct (k) range drive voltage @ 700ma luminous flux (lm) @700ma part number emitting color led chip material lens color min max typ. typ. view angle 2 1/2 (deg) btp5-99nrct-xx-x/w normal red water clear 620 645 4.40v 120 btp5-99amct-xx-x/w amber water clear 610 620 4.40v 144 btp5-99yect-xx-x/w yellow alingap water clear 585 600 4.40v 112 btp5-99blct-xx-x/w blue water clear 460 490 7.10v 40 btp5-99pgct-xx-x/w green water clear 520 545 7.10v 120 btp5-99wwct-xx-x/w warm white water clear 2800k 3800k 7.10v 96 btp5-99whct-xx-x/w white alingan water clear 5000k 8000k 7.10v 100 140 notes: 1) picture for illustration purpose only. please refer to outline dimension for actual package size. 2) flux is measured with the accuracy of 15%. please refer to flux selection guide 3) cct is measured with the accuracy of 400k. please refer to cct selection guide 4) v f is measured with the accuracy of 0.15v. please refer to v f selection guide
part no.: btp5-99xxct-xx-x/w rev1.2005 page 2 of 7 pro lite 5w smd star btp5-99xxct-xx-x/w absolute maximum ratings at t j =25oc parameter red/amber/yellow white/blue/green power dissipation (w) 4.35 5.59 dc forward current (ma) [1] 700 700 peak pulsed forward current (ma) [4] 1000 1000 average forward current (ma) 700 700 reverse voltage (v) 5 5 reverse current (ua) 50 50 esd sensitivity (v) [2] 16,000 16,000 led junction temper ature at 350ma (c) [3] 120 135 thermal resistance junction to board (c/w) 13 13 temperature coefficient of v f (mv/c) -2 -2 storage temperature (c) -40 to +105 -40 to +105 operating temperature (c) -40 to +105 -40 to +105 lead soldering temperature (c) [4] 260c for 5 seconds max 260c for 5 seconds max application notes: 1. proper forward current must be observed to ma intain the junction temperature below maximum rating 2. although all products listed are class two esd pr otection (+/- 16kv by hbm mode), care must be fully taken when handling products 3. specification is subjected to ch ange for improvements without notice. 4. test conditions: tp 10us, duty cycle = 0.005 5. caution: when lighting up, the emitter will become very hot if it is not attached to a heat sink. please provide proper heat management to prevent damage to the emitter.
part no.: btp5-99xxct-xx-x/w rev1.2005 page 3 of 7 pro lite 5w smd star btp5-99xxct-xx-x/w cct, flux and v f selection guide (@t j =25oc, i f =700ma) btp5-99xxct-xx -x /w white housing wavelength ranks selection flux ranks selection d (nm) color bin min max b5 460 465 b6 465 470 b7 470 475 b8 475 480 b9 480 485 b10 485 490 blue xx 460 ? 490 g7 520 525 g8 525 530 g9 530 535 g10 535 540 g11 540 545 green xx 520 ? 545 red xx 620 ? 630 amber xx 610 ? 620 yellow xx 585 ? 600 cct ranks selection cct(k) color temp bin min max 00 2800 3300 01 3300 3800 warm white xx 2800k ? 3800k 02 5000 6000 03 6000 7000 04 7000 8000 white xx 5000k ? 8000k color bin flux (lumens) p 23~30 q 30~39 r 39~50 blue x default full range t 65~85 u 85~111 v 111~144 w 144~187 red amber yellow green white x default full range v f ranks selection v f (v) color bin min max v12 3.6 3.8 v13 3.8 4.0 v14 4.0 4.2 v15 4.2 4.4 v16 4.4 4.6 v17 4.6 4.8 red amber yellow vxx (full) 3.6~4.8 v27 6.8 7.0 v29 7.0 7.2 v30 7.2 7.4 v31 7.4 7.6 v32 7.6 7.8 v33 7.8 8.0 warm white white blue green vxx (full) 6.8~8.0 (please specify on order, otherwise, default full range of v f )
part no.: btp5-99xxct-xx-x/w rev1.2005 page 4 of 7 pro lite 5w smd star btp5-99xxct-xx-x/w typical electro-optical characteristics curves fig. 1 forward current vs ambient temperature (green, blue and white) fig. 2 forward current vs ambient temperature (red, amber and yellow)
part no.: btp5-99xxct-xx-x/w rev1.2005 page 5 of 7 pro lite 5w smd star btp5-99xxct-xx-x/w
part no.: btp5-99xxct-xx-x/w rev1.2005 page 6 of 7 pro lite 5w smd star btp5-99xxct-xx-x/w typical electro-optical characteristics curves fig. 5a relative light output vs junction temperature fig. 5b relative light output vs junction temperature
part no.: btp5-99xxct-xx-x/w rev1.2005 page 7 of 7 0 10 20 30 40 50 60 70 80 90 100 -100 -80 -60 -40 -20 0 20 40 60 80 100 angular displacement(degree) relative intensity(% ) pro lite 5w smd star btp5-99xxct-xx-x/w typical electro-optical characteristics curves fig. 6 typical radiation pattern other important notes z the information contained herein is presented only as a guide for th e application of our products. brilliance technologies assumes no respons ibility for any infringement of intellectual property or other rights of the third parties which may result from its use. z brilliance technologies continually im proves the quality of our products. nevertheless, semiconductor devices in general can malfunc tion or fail due to their inherent electrical sen sitivity and vulnerability to physical stress. it is the responsible of the customer, when using brilliance technologies products, to comply with the standard of safety in making a safe desi gn for the entire system, and to avoid situations in which a malfunction or failure of such brilliance t echnologies products cause loss of human life, bodily injury or damage to property. z brilliance technologies products listed in this data sheet are intended for usage in general electronics and/or non-commercia l or industrial lighting produc ts. these products are neit her intended nor warranted for usage in equipment that requires extraordinarily hi gh quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury. z in developing your design, please en sure that brilliance technologies pr oducts are used wi thin specified operating ranges as set forth in the most recent brilliance technologies data sheets. bt-rev. 1.0b20050120 specifications are subject to chan ge for improvement without notice. copyright ? 2003 brilliance technologies co., ltd. all rights reserved.
|
