recommended mounting holes 0.47 [12.0mm] 0.81 [20.6mm] 0.18 [4.6mm] typ. 0.218 [5.5mm] 0.118 [3.0mm] 0.100 [2.5mm] 0.16 [4.0mm] 0.100 [2.5mm] 0.162 [4.1mm] 0.104 [2.6mm] lightpipe faces 0.10 [2.5mm] ?.038 [?1.0mm] 0.10 [2.5mm] ?.038 +.003 -.002 0.092 [2.3mm] 0.24 [6.0mm] ?.118 [?3.0mm] 0.11 [2.8mm] ( unless otherwise specified ) SLP-1 cage code : 32559 4 thomas, irvine, ca. 92618 tel: (949) 951-8808 fax: (949) 951-3974 cad generated document, do not measure drawing. date: checked: 08/14/00 r. dienst 11/23/98 date: shane irving decimals .x .1 designed: .xx .01 .xxx .005 light pipe, 90 surface mount part no: title: angular x 1 1 1 sheet # of c revision: standard tolerance a engineering update w/o changes a rev. description m. c. approved 03/09/04 date 1. general specifications: bivar molded component specification bv00-e101. 0.775 [19.7mm] ref. 0.775 [19.7mm] b typo correction, dim. 0.775" was 0.740". 05/11/05 m. c. sam yang corporation polycarbonate 3025n2 clear. 2. material: polycarbonate, 94v-0, clear. bivar material code 47-cr. c updated material code. 02/12/07 m. c.
|