View P0353_1405442.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 g002.f (10/02) us 619 674 8100 ? ? uk 44 1483 401 700 ? ? france 33 3 84 35 04 04 ? ? singapore 65 287 8998 ? ? taiwan 886 2 2698 0228 ? ? hong kong 852 2788 6588 ? ? http://www.pulseeng.com common mode choke catalog for datacom and power applications table of contents common mode chokes for datacom applications surface mount common mode chokes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-6 through hole common mode chokes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-12 common mode chokes & inductors for power applications self-leaded, smt common mode chokes & inductors . . . . . . . . . . . . . . . . . . .13-14 self-leaded, smt common mode inductors . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-16 common mode emi suppression inductors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 500 khz common mode inductors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
13 g002.f (10/02) us 619 674 8100 ? ? uk 44 1483 401 700 ? ? france 33 3 84 35 04 04 ? ? singapore 65 287 8998 ? ? taiwan 886 2 2698 0228 ? ? hong kong 852 2788 6588 ? ? http://www.pulseeng.com self-leaded, smt common mode chokes suited for power applications solutions based on impedance, size and current designed for dc/dc converters wide variety of inductor sizes and current ratings available dielectric strength: 500 v rms impedance curves ratedcurrent leakage impedance part for 55c rise inductance inductance 1 dcr (max) curve package weight quantity quantity number (amps) (mh 35%) @ 100 khz (m ) (see # below) (grams) in tube in reel (h nom) p0354 1.22 1.170 8.296 200 1 polecat 1.4 40 500 p0473 1.63 0.884 5.807 110 2 polecat 1.5 40 500 p0351 2.80 1.470 9.630 80 3 lcci-50 4.3 30 200 p0420 3.30 1.320 8.130 60 4 lcci-50 4.6 30 200 p0421 3.30 0.225 8.175 60 5 lcci-50 4.7 30 200 p0422 4.70 0.768 4.559 40 6 lcci-50 4.9 30 200 P0353 5.60 0.590 3.891 20 7 lcci-50 5.2 30 200 p0527 7.20 0.530 4.536 15 8 hcci-68 7.7 20 100 p0429 9.70 0.809 7.408 14 6 big foot 13.5 15 75 p0469 11.6 0.630 5.482 10 7 big foot 14.3 15 75 p0502 14.0 0.473 4.531 8 9 big foot 14.8 15 75 note: add suffix "t" to part number for tape and reel package (i.e. p0354 t ). 1. leakage inductance tested @ 100 khz, 1140 mv, (1-2) with (3-4) shorted. electrical specifications @ 25c ? operating temperature - 40c to +120c 100 khz 1 mhz 10 mhz 100 mhz frequency 7.5k 6.0k 4.5k 3.0k 1.5k 0 impedance ( ) 6 7 9 8 100 khz 1 mhz 10 mhz 100 mhz frequency 15k 12k 9k 6k 3k 0 impedance ( ) 4 1 2 3 5
g002.f (10/02) 14 us 619 674 8100 ? ? uk 44 1483 401 700 ? ? france 33 3 84 35 04 04 ? ? singapore 65 287 8998 ? ? taiwan 886 2 2698 0228 ? ? hong kong 852 2788 6588 ? ? http://www.pulseeng.com mechanicals schematic unless otherwise specified, all tolerances are .005 0,13 dimensions: inches mm polecat lcci-50 hcci-68 big foot self-leaded, smt common mode chokes suited for power applications suggested pad layout 4x .175 4,45 .005/0,13 4 surfaces .390 max 9,91 1 2 3 4 .670 max 17,02 .650 max 16,51 .770 max 19,56 .660 16,76 3 1 4 2 .445 11,30 4x .060 1,52 r 3 1 2 4 4x .060 1,52 4x .175 4,45 suggested pad layout .500 max 12,70 .215 max 5,46 .410 10,41 .330 8,38 .410 10,41 r .500 max 12,70 .005/0,13 4 surfaces .330 8,38 13 4 2 .500 max 12,70 1.100 27,94 1.220 max 30,99 1.000 max 25,40 13 24 .006/0,15 4 surfaces suggested pad layout .600 15,24 .400 10,16 1.097 27,86 .155 3,94 1 3 24
#(( 1 ""%# 2 4 1 2 3
15 g002.f (10/02) us 619 674 8100 ? ? uk 44 1483 401 700 ? ? france 33 3 84 35 04 04 ? ? singapore 65 287 8998 ? ? taiwan 886 2 2698 0228 ? ? hong kong 852 2788 6588 ? ? http://www.pulseeng.com pick and place compatible rated voltage 250vac low rfi toroid tape & reel packaging available vde approval and u.l. recognition pending mechanical schematic unless otherwise specified, all tolerances are .010 0,25 dimensions: inches mm pe-5391x self-leaded smt common mode inductors suited for power applications size a b c d e f lcci-1 .560/14,22 .645/16,38 .350/8,89 .520/13,21 .340/8,64 .530/13,46 lcci-3 .670/17,02 .770/19,56 .390/9,90 .650/16,51 .445/11,30 .660/16,76 leakage impedance part i rms inductance inductance 1 dcr (max) srf curve size weight quantity number (amps) (mh 30%) @ 100 khz (m ) (mhz) (see back page) code (grams) in tube (h nom) pe-53910 3.60 1.0 3.166 50 4 1 lcci-3 5.3 30 pe-53911 1.50 1.0 3.960 60 2 2 lcci-1 2.5 40 pe-53912 2.50 3.0 9.297 80 2.2 3 lcci-3 5.2 30 pe-53913 1.00 10.0 39.390 450 0.5 4 lcci-1 2.4 40 pe-53914 0.50 22.0 60.660 850 0.3 5 lcci-1 2.4 40 note: add suffix "t" to part number for tape and reel package (i.e. p0354 t ). 1. leakage inductance tested @ 100 khz, 1140 mv, (1-2) with (3-4) shorted. electrical specifications @ 25c ? operating temperature -40c to +130c ) !"#$" #%&!'(#)'*+*& #(( 1 ""%# .
! 4 1 2 3 1:1 2%
g002.f (10/02) 16 us 619 674 8100 ? ? uk 44 1483 401 700 ? ? france 33 3 84 35 04 04 ? ? singapore 65 287 8998 ? ? taiwan 886 2 2698 0228 ? ? hong kong 852 2788 6588 ? ? http://www.pulseeng.com performance description impedance curves application notes the common mode choke family has been developed to attenuate conductor noise (emi) in systems. the designs on high permeability toroidal cores, performs two different filter functions. there is one winding for each of the two polarity lines with the inductors coupled by a single core. common mode signals (referred to ground) are suppressed by the full inductance of each coil. as an added benefit, differential signals are attenuated by the leakage inductance of the windings. the full inductance in connection with capacitances (0.1 to 1f) connected to earth ground will yield filtering results required for switch mode power supplies. pulse can assist you with successful solutions to pass world emi/emc standards such as fcc, vde & ide. our safe and cost effective products span the application spectrum. emi/emc control products include low power signal filtering devices, toroidal inductor product families and a wide selection of vde/ul approved common mode chokes. please call our applications engineering locations for emc technical support services including catalogs, samples, measurements, screenroom testing or design assistance. self-leaded smt common mode inductors suited for power applications frequency (mhz) 1k impedance ( ) 4 1 2 3 5 0 2k 3k 4k 5k 6k 7k 0 0.01 0.1 1 10 100
17 g002.f (10/02) us 619 674 8100 ? ? uk 44 1483 401 700 ? ? france 33 3 84 35 04 04 ? ? singapore 65 287 8998 ? ? taiwan 886 2 2698 0228 ? ? hong kong 852 2788 6588 ? ? http://www.pulseeng.com common mode emi suppression inductors suited for power applications low profile or vertical mounting available windings balanced within one percent for use in switching power supply input filter circuits dielectric strength 1250 v rms designed with 3.0 mm minimum creep distance between windings unless otherwise specified, all tolerances are .010 0,25 vertical package low profile package dimensions: inches mm mechanicals schematic package abc de number 1 1.25 .600 1.00 .015 .900 31,75 15,24 25,40 0,38 22,86 2 1.50 .800 1.28 .010 1.083 38,10 20,32 32,51 0,25 27,50 package abcdefg number 1 1.15 .550 .400 .800 .45 .015 1.15 29,21 13,97 10,15 20,32 11,43 0,38 29,21 2 1.44 .800 .600 .900 .70 .030 1.50 36,57 20,32 15,24 22,86 17,78 0,76 38,10 notes: 1. rated rms current for 40c rise at any input voltage. 2. caution ? do not exceed rated rms current ratings. electrical specifications @ 25c? operating temperature -30 to +130 c rated load leakage dcr lead diameter low profile vertical rms va 2 at inductance test level inductance max. each package inches .003 part mount part current 1 rms line at 1 khz volts rms 130 khz wdg number low vertical number number (amps) 117 v 220 v (mh min) 1.0 khz (h min) ( ) profile mount pe-62891 pe-62911 1.8 210 420 10.0 0.50 130 0.240 1 0.032 0.032 pe-62892 pe-62912 3.5 400 800 3.0 0.20 35 0.060 1 0.032 0.032 pe-62893 pe-62913 6.0 700 1400 1.0 0.08 12 0.020 1 0.036 0.036 pe-62894 pe-62914 2.6 300 600 16.0 1.00 180 0.160 2 0.032 0.040 pe-62895 pe-62915 3.2 375 750 8.0 0.50 90 0.120 2 0.032 0.040 pe-62896 pe-62916 5.2 600 1200 4.0 0.20 45 0.040 2 0.036 0.036 pe-62897 pe-62917 7.5 875 1750 2.0 0.08 25 0.020 2 0.047 0.047 a max 3mm creepage spacer 1 2 pe-6291x date code country of origin 4 3 g max e max f max d c b max .200 5,08 min d min 1 2 3 4 pe-6289x (date code) a max c e c b max a max .200 5,08 min 4 3 2 1
g002.f (10/02) 18 500 khz common mode emi inductors suited for power applications notes : 1. leads have .031/.039 diameter. .700/.900 2.self-leaded: 96187 has .036 nom. diameter leads. 96188 & 96189 have .045 nom. diameter leads. 96190 has .051 nom. diameter leads. elect. specs. @ 25c? operating temp. -30 to +130 c common mode emi inductors designed for higher frequency power conversion for use in smps input filtering circuits schematic mechanicals unless otherwise specified, all tolerances are .010 0,25 dimensions: inches mm performance warranty of products offered on this data sheet is limited to the parameters specified. data is subject to change without notice. other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. printed on recycled paper. copyright ?2002, pulse engineering, inc. all rights reserved. for more information : united states (worldwide) 12220 world trade drive san diego, ca 92128 u.s.a. http://www.pulseeng.com tel: 858 674 8100 fax: 858 674 8262 united kingdom (northern europe) 1 & 2 huxley road the surrey research park guildford, surrey gu2 5re united kingdom tel: 44 1483 401700 fax: 44 1483 401701 france (southern europe) zone industrielle f-39270 orgelet france tel: 33 3 84 35 04 04 fax: 33 3 84 25 46 41 taiwan, r.o.c. (northern asia) 3f-4, no. 81, sec. 1 hsintai wu road hsi-chih, taipei hsien taiwan, r.o.c. tel: 886 2 2698 0228 fax: 886 2 2698 0948 singapore (southern asia) 150 kampong ampat #07-01/02 ka centre singapore 368324 tel: 65 287 8998 fax: 65 280 0080 hong kong (china/hong kong) 19/f, china united plaza 1008 tai nan west street cheung sha wan, kowloon hong kong, china tel: 852 2788 6588 fax: 852 2776 1055 distributor part rated rms inductance dcr case leakage number current mh ( max) style inductance (a.normal) ( 30%) (min/max h) pe-96161 0.5 33 1.40 3 160/320 pe-96165 1.0 18 0.50 1 120/320 pe-96166 1.0 5.6 0.30 3 30/60 pe-96168 2.0 15 0.29 1 100/220 pe-96173 3.15 5.6 0.10 1 40/80 pe-96175 3.15 3.3 0.07 3 15/35 pe-96177 3.15 2.2 0.06 3 10/20 pe-96178 3.15 1.2 0.04 3 6/15 pe-96179 3.15 1.2 0.04 4 5/14 pe-96181 5.0 3.9 0.06 1 25/60 pe-96186 6.3 2.7 0.04 1 20/45 pe-96187 8.0 3.3 0.033 2 20/45 pe-96188 10.0 1.8 0.02 2 10/25 pe-96189 12.5 1.5 0.015 2 10/20 pe-96190 15.0 1.0 0.01 2 7/15 case 1 1 case 2 2 case 3 1 case 4 1 *. /! / !+

+/ 2 2 3 1 2 4 *. /! /

+/ 2 2 *. /! / +/ 2 2

+/ 2 2 *. /! /

▲Up To Search▲

Price & Availability of P0353

	To Download P0353 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .