dc-8.0 ghz ingap hbt mmic matched gain block amplifier page 1 of 7 mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. CGB7017-BD chip layout features low operating voltage: 5v 33.8 dbm output ip3 @ 850 mhz 3.3 db noise figure @ 850 mhz 23.1 db gain @ 850 mhz, 19.5 db @ 6 ghz 18.2 dbm p1db @ 850 mhz low performance variation over temperature 100% dc on-wafer testing esd protection on all die: >1000v hbm low thermal resistance: <100oc/watt pa driver amp, if amp, lo buffer amp cellular, pcs, gsm, umts wireless data and satcom transmit and receive functions catv applications typical performance notes: 1. performance in mimix eval board, vs = 5 v, id = 70 ma typ., rbias = 10 , zs = zl = 50 , oip3 tone spacing = 1 mhz, pout per tone = 6 dbm. 2. values reflect performance in recommended application circuit. 3. only on-wafer dc test is done. devices are not tested for rf performance. 850 mhz 1950 mhz 2400 mhz 3500 mhz 6000 mhz units max. typ. min. max. typ. min. max. typ. min. max. typ. min. temperature (oc) parameter small signal gain output p1db output ip3 noise figure operating current input return loss output return loss pout @ -45 dbc, acp is-95, 9 forward channels +25 -40 to +85 +25 -40 to +85 +25 -40 to +85 +25 -40 to +85 +25 -40 to +85 +25 -40 to +85 +25 -40 to +85 +25 -40 to +85 22.1 22.0 17.2 16.9 32.3 31.8 65 59 11 10 16 15 23.1 23.1 18.2 18.2 33.8 33.8 3.3 3.3 70 70 15 15 23 23 12 12 24.1 24.2 4.1 4.5 75 79 21.0 20.9 16.7 16.3 31.4 30.9 65 59 11 10 11 10 22.0 22.0 17.7 17.7 32.9 32.9 3.6 3.6 70 70 16 16 16 16 12 12 23.0 23.1 4.4 4.8 75 79 20.8 20.7 16.7 16.3 30.2 29.7 65 59 11 10 11 10 21.8 21.8 17.7 17.7 31.7 31.7 3.7 3.7 70 70 15 15 16 16 22.8 22.9 4.5 4.9 75 79 21.0 21.0 17.0 17.0 27.6 27.6 3.8 3.8 70 70 11 11 16 16 db db dbm dbm dbm dbm db db ma ma db db db db dbm dbm max. typ. min. 19.5 19.5 12.0 12.0 20.3 20.3 4.6 4.6 70 70 7.5 7.5 13 13 max device voltage max device current max device dissipated power rf input power storage temperature junction temperature operating temperature thermal resistance eds (hbm) +6.0 v 130 ma 0.65 w +17 dbm -55oc to 150oc 150oc -40oc to +85oc 85o c/w 1000 v absolute maximum ratings description the CGB7017-BD is a darlington configured, high dynamic range, utility gain block amplifier. designed for applications operating within the dc to 8.0 ghz frequency range, mimix?s broadband, cascadable, gain block amplifiers are ideal solutions for transmit, receive and if applications. these mmic amplifiers are available in bare die form. mimix's ingap hbt technology and an industry low thermal resistance offers a thermally robust and reliable gain block solution. the ingap hbt die have extra pads to enable thorough dc testing. this unique test capability and the inclusion of esd protection on all die, significantly enhances the quality, reliability and ruggedness of these products. with a single bypass capacitor, optional rf choke and two dc blocking capacitors, this gain block amplifier offers significant ease of use in a broad range of applications. operation of this device above any of these parameters may cause permanent damage. april 2007 - rev 05-apr-07
noise figure vs frequency 2.5 3 3.5 4 4.5 5 5.5 6 6.5 02468 frequency (ghz) noise figure (db) 25 c -40 c 85 c |s21| vs frequency 12 14 16 18 20 22 24 26 012345678 frequency (ghz) |s21| (db) 25 c -40 c 85 c |s11| vs frequency -20 -16 -12 -8 -4 012345678 frequency (ghz) |s11| (db) 25 c -40 c 85 c |s12| vs frequency -30 -28 -26 -24 -22 -20 -18 012345678 frequency (ghz) |s22| (db) 25 c -40 c 85 c |s22| vs frequency -26 -22 -18 -14 -10 -6 012345678 frequency (ghz) |s22| (db) 25 c -40 c 85 c page 2 of 7 typical s-parameter and noise performance dc-8.0 ghz ingap hbt mmic matched gain block amplifier mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. CGB7017-BD april 2007 - rev 05-apr-07
p1db vs frequency 6 8 10 12 14 16 18 20 012345678 frequency (ghz) p1db (dbm) 25 c -40 c 85 c oip3 vs frequency 14 18 22 26 30 34 38 012345678 frequency (ghz) oip3 (dbm) 25 c -40 c 85 c 1 mhz separation, 6 dbm/tone acp @ 850 mhz vs pout 9 channels forward, 750 khz offset, 30 khz bw -60 -55 -50 -45 -40 -35 -30 4 8 12 16 20 pout (dbm) acp (dbc) 25 c -40 c 85 c linearity performance - base station acp ? is-95 alt1 ch. pwr @ 850 mhz vs pout 9 channels forward, 1.98 mhz offset, 30 khz bw -85 -75 -65 -55 -45 4 8 12 16 20 pout (dbm) acp (dbc) 25 c -40 c 85 c acp @ 1950 mhz vs. pout 9 forward channels, 885 khz offset 30 khz bw -65 -55 -45 -35 -25 4 8 12 16 20 pout (dbm) acp (dbc) 25 c -40 c 85 c alt1 ch. pwr @ 1950 mhz vs pout 9 channels forward, 1.25 mhz offset 12.5 khz bw -75 -65 -55 -45 -35 4 8 12 16 20 pout (dbm) acp (dbc) 25 c -40 c 85 c acp @ 2140 mhz vs pout wcdma, 3gpp tm1, 1 channel, 64 dpch -55 -50 -45 -40 -35 -30 -25 -20 4 8 12 16 20 pout (dbm) acp (dbc) 25 c -40 c 85 c alt. ch. pwr @ 2140 mhz vs pout wcdma, 3gpp tm1, 1 channel, 64 dpch -65 -60 -55 -50 -45 -40 4 8 12 16 20 pout (dbm) acp (dbc) 25 c -40 c 85 c page 3 of 7 typical power and linearity performance dc-8.0 ghz ingap hbt mmic matched gain block amplifier mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. CGB7017-BD april 2007 - rev 05-apr-07
page 4 of 7 typical scattering parameters ( v d = +4.5 v , icc = 74 ma, t = 2 3 c, device in a 50 ohm system) frequency s 11 s 21 s 12 s 22 (mhz) (mag) (ang) (mag) (ang) (mag) (ang) (mag) (ang) 100 0.0 3 9 -164 15.58 175 0.054 -1 0.017 -1 3 0 200 0.04 3 -152 15.51 170 0.055 -2 0.026 -124 3 00 0.051 -144 15.45 164 0.055 -4 0.0 3 6 -120 400 0.058 -140 15. 3 7 159 0.055 -5 0.046 -119 500 0.066 -1 3 6 15.27 154 0.055 -6 0.055 -119 600 0.075 -1 3 4 15.17 149 0.055 -7 0.065 -120 700 0.084 -1 3 4 15.06 144 0.055 -8 0.074 -122 800 0.094 -1 3 4 14.9 3 1 3 9 0.056 -10 0.08 3 -12 3 900 0.10 3 -1 3 4 14.81 1 3 4 0.056 -11 0.092 -124 1000 0.11 3 -1 3 4 14.68 1 3 0 0.057 -12 0.101 -126 1100 0.122 -1 3 5 14.54 125 0.057 -14 0.109 -128 1200 0.1 3 1-1 3 6 14.40 120 0.057 -15 0.116 -1 3 0 1 3 00 0.140 -1 3 7 14.25 115 0.058 -16 0.12 3 -1 3 2 1400 0.148 -1 3 9 14.08 110 0.059 -18 0.1 3 0-1 3 4 1500 0.156 -140 1 3 .9 3 106 0.059 -19 0.1 3 7-1 3 6 1600 0.164 -142 1 3 .77 101 0.060 -21 0.14 3 -1 3 8 1700 0.172 -144 1 3 .61 96 0.060 -22 0.149 -140 1800 0.181 -145 1 3 .44 92 0.061 -24 0.155 -142 1900 0.190 -147 1 3 .28 87 0.062 -25 0.160 -144 2000 0.197 -149 1 3 .12 8 3 0.062 -27 0.166 -146 2100 0.204 -151 12.96 78 0.06 3 -29 0.171 -147 2200 0.211 -15 3 12.80 74 0.064 - 3 0 0.177 -149 2 3 00 0.218 -155 12.64 69 0.065 - 3 2 0.180 -151 2400 0.225 -157 12.49 65 0.065 - 3 4 0.185 -15 3 2500 0.2 3 1 -159 12. 33 60 0.066 - 3 6 0.190 -154 2600 0.2 3 7 -162 12.19 56 0.067 - 3 7 0.194 -156 2700 0.24 3 -164 12.04 52 0.068 - 3 9 0.199 -158 2800 0.248 -167 11.89 47 0.069 -41 0.20 3 -160 2900 0.254 -169 11.75 4 3 0.070 -4 3 0.206 -162 3 000 0.260 -171 11.61 3 9 0.070 -45 0.211 -16 3 3 100 0.265 -17 3 11.49 3 5 0.072 -47 0.216 -165 3 200 0.269 -176 11. 3 8 3 1 0.07 3 -49 0.222 -167 33 00 0.274 -179 11.27 26 0.074 -51 0.227 -169 3 400 0.279 178 11.17 22 0.075 -5 3 0.2 3 1 -171 3 500 0.285 175 11.07 18 0.076 -55 0.2 3 6 -17 3 3 600 0.289 17 3 10.97 14 0.077 -57 0.242 -175 3 700 0.29 3 169 10.89 10 0.078 -59 0.248 -178 3 800 0.296 166 10.81 6 0.079 -61 0.254 179 3 900 0.299 162 10.7 3 1 0.080 -64 0.259 176 4000 0. 3 0 3 159 10.66 - 3 0.082 -66 0.264 174 4100 0. 3 06 155 10.58 -7 0.08 3 -68 0.268 171 4200 0. 3 07 151 10.52 -11 0.084 -70 0.274 168 4 3 00 0. 3 08 147 10.46 -15 0.086 -7 3 0.279 164 4400 0. 3 09 142 10.42 -20 0.087 -75 0.28 3 160 4500 0. 3 10 1 3 8 10. 3 6 -24 0.089 -78 0.287 157 4600 0. 3 12 1 33 10. 3 2 -28 0.090 -80 0.292 15 3 4700 0. 3 1 3 128 10.28 - 33 0.091 -8 3 0.297 149 4800 0. 3 12 122 10.24 - 3 7 0.09 3 -86 0. 3 02 145 4900 0. 3 1 3 117 10.22 -41 0.095 -89 0. 3 07 140 5000 0. 3 14 110 10.19 -46 0.096 -91 0. 3 11 1 3 5 continues n ext page. s-parameter data files are available online at: www.mimixbroadband.com dc-8.0 ghz ingap hbt mmic matched gain block amplifier mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. CGB7017-BD april 2007 - rev 05-apr-07
page 5 of 7 typical scattering parameters ( v d = +4.5 v , icc = 74 ma, t = 2 3 c, device in a 50 ohm system) frequency s 11 s 21 s 12 s 22 (mhz) (mag) (ang) (mag) (ang) (mag) (ang) (mag) (ang) 5100 0. 3 15 104 10.15 -51 0.098 -94 0. 3 14 1 3 0 5200 0. 3 16 97 10.1 3 -55 0.100 -97 0. 3 19 125 5 3 00 0. 3 17 91 10.11 -60 0.101 -100 0. 3 24 120 5400 0. 3 19 8 3 10.08 -65 0.10 3 -104 0. 33 0 114 5500 0. 3 2 3 75 10.05 -69 0.105 -107 0. 33 5 108 5600 0. 3 29 67 10.0 3 -74 0.106 -110 0. 3 41 101 5700 0. 33 7 59 9.99 -79 0.108 -114 0. 3 47 95 5800 0. 3 46 51 9.96 -84 0.109 -117 0. 3 54 88 5900 0. 3 55 42 9.90 -90 0.110 -121 0. 3 61 81 6000 0. 3 67 33 9.84 -95 0.112 -125 0. 3 69 7 3 6100 0. 3 84 24 9.76 -100 0.11 3 -129 0. 3 78 66 6200 0.401 15 9.66 -106 0.11 3 -1 33 0. 3 86 58 6 3 00 0.420 7 9.56 -111 0.114 -1 3 70. 3 97 51 6400 0.441 -2 9.4 3 -117 0.115 -141 0.408 4 3 6500 0.46 3 -10 9.29 -12 3 0.115 -145 0.421 3 5 6600 0.487 -19 9.1 3 -128 0.114 -149 0.4 3 527 6700 0.51 3 -26 8.9 3 -1 3 4 0.114 -15 3 0.448 19 6800 0.5 3 7- 3 4 8.7 3 -140 0.11 3 -158 0.462 12 6900 0.561 -42 8.50 -145 0.112 -162 0.477 4 7000 0.586 -49 8.27 -151 0.110 -166 0.492 - 3 7100 0.609 -56 8.00 -157 0.109 -170 0.505 -11 7200 0.6 3 2-6 3 7.72 -162 0.106 -174 0.518 -18 7 3 00 0.652 -70 7.44 -168 0.104 -178 0.5 3 1 -25 7400 0.670 -76 7.17 -17 3 0.102 178 0.542 - 3 1 7500 0.688 -82 6.88 -178 0.099 174 0.554 - 3 8 7600 0.70 3 -88 6.59 176 0.096 170 0.565 -44 7700 0.718 -94 6. 3 1 171 0.094 167 0.575 -49 7800 0.7 3 0 -99 6.02 166 0.091 16 3 0.584 -55 7900 0.741 -104 5.76 162 0.089 160 0.592 -60 8000 0.749 -109 5.50 157 0.086 157 0.599 -65 8100 0.757 -114 5.24 152 0.08 3 15 3 0.607 -70 8200 0.766 -119 5.00 148 0.081 151 0.61 3 -75 8 3 00 0.772 -12 3 4.75 144 0.078 148 0.619 -80 8400 0.776 -128 4.5 3 1 3 9 0.076 145 0.625 -84 8500 0.779 -1 3 24. 33 1 3 5 0.074 142 0.629 -88 8600 0.782 -1 3 6 4.1 3 1 3 1 0.072 1 3 9 0.6 33 -92 8700 0.78 3 -140 3 .9 3 127 0.069 1 3 7 0.6 3 8 -95 8800 0.786 -144 3 .75 12 3 0.067 1 3 4 0.642 -99 8900 0.787 -147 3 .58 120 0.065 1 3 2 0.644 -10 3 9000 0.786 -151 3 .42 116 0.064 1 3 0 0.647 -106 9100 0.785 -155 3 .27 112 0.062 128 0.650 -109 9200 0.784 -158 3 .1 3 109 0.060 126 0.652 -112 9 3 00 0.78 3 -162 2.99 105 0.059 12 3 0.654 -115 9400 0.781 -165 2.86 102 0.057 121 0.656 -118 9500 0.777 -168 2.74 98 0.056 119 0.658 -121 9600 0.77 3 -171 2.62 95 0.055 117 0.660 -124 9700 0.769 -175 2.51 91 0.054 115 0.661 -127 9800 0.765 -178 2.41 88 0.05 3 11 3 0.66 3 -129 9900 0.762 179 2. 3 1 85 0.052 112 0.664 -1 3 2 10000 0.756 176 2.21 81 0.051 110 0.665 -1 3 4 s-parameter data files are available online at: www.mimixbroadband.com dc-8.0 ghz ingap hbt mmic matched gain block amplifier mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. CGB7017-BD april 2007 - rev 05-apr-07
page 6 of 7 note: this schematic represents the topology of the application circuit recommended by mimix. recommended bias resistor values for id = 78 ma supply voltage (vs) 5v 7v 8v 10v rbias (1206 1/4w) 10 38 52 ?? rbias (1210 1/2w) ? ? note: rbias provides dc bias stability over temperature. 81 2 rf in vs rf out c1 c2 uuuu l1 r bias = (vs - vd) / id 4 3 1 vd r1 c3 c4 application circuit cgb7017-sc gain vs temp and frequency 17 18 19 20 21 22 23 0 1000 2000 3000 4000 5000 6000 frequency (mhz) small signal gain (db) -40c 25c 85c typical gain performance ref designator value c1, c2, c3 c4 l1 l1 l3 r1 r2 (1/4w) 1000 pf 1.0 f 56 nh 470 nh 6.8 nh r bias = (vs - vd) / id 75 note: contact factory for matching recommendations if flat gain is required from 2 to 6 ghz. dc-8.0 ghz ingap hbt mmic matched gain block amplifier mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. CGB7017-BD april 2007 - rev 05-apr-07 bonding configuration physical dimensions
page 8 of 8 dc-8.0 ghz ingap hbt mmic matched gain block amplifier mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. CGB7017-BD april 2007 - rev 05-apr-07 handling and assembly information caution! - mimix broadband mmic products contain gallium arsenide (gaas) which can be hazardous to the human body and the environment. for safety, observe the following procedures: do not ingest. do not alter the form of this product into a gas , powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. observe government laws and company regulations when discarding this product. this product must be discarded in accordance with methods specified by applicable hazardous waste procedures. life support policy - mimix broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the president and general counsel of mimix broadband. as used herein: (1) life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) a critical component is any compone nt of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. esd - gallium arsenide (gaas) devices are susceptible to electrostatic and mechanical damage. die are supplied in antistatic containers, which should be opened in cleanroom conditions at an appropriately grounded anti-static workstation. devices need careful handling using correctly designed collets, vacuum pickups or, with care, sharp tweezers. die attachment - gaas products from mimix broadband are 0.100 mm (0.004") thick. microstrip substrates should be brought as close to the die as possible. the mounting surface should be clean and flat. if using conductive epoxy, recommended epoxies are tanaka ts3332ld, die mat dm6030hk or dm6030hk-pt cured in a nitrogen atmosphere per manufacturer's cure schedule. apply epoxy sparingly to avoid getting any on to the top surface of the die. an epoxy fillet should be visible around the total die periphery. for additional information please see the mimix "epoxy specifications for bare die" application note. wire bonding - windows in the surface passivation above the bond pads are provided to allow wire bonding to the die's gold bond pads. the recommended wire bonding procedure uses gold 0.025 mm (0.001") diameter ball bonds. aluminum wire should be avoided. thermo-compression bonding is recommended though thermosonic bonding may be used providing the ultrasonic content of the bond is minimized. bond force, time and ultrasonics are all critical parameters. bonds should be made from the bond pads on the die to the package or substrate. all bonds should be as short as possible. part number for ordering description CGB7017-BD-000v rohs compliant die packed in vacuum release gel paks
|
