View PS2701A-1-F3-P-A_1705631.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

photocoupler ps2701 a - 1 high isolation voltage sop photocoupler nepoc series docum ent no. pn10396ej0 5 v0ds ( 5 th edition) date published august 200 9 ns the mark shows major revised points. the revised points can be easily searched by copying an "" in the pdf file and specifying it in the "find what:" field. description the ps2701a - 1 is an optically coupled isolator containing a gaas light emitting diode and an npn silicon phototransistor to realize an excellent cost performance. this package is sop (small outline package) type and has shield effect to cut o ff ambient light. it is designed for high density mounting applications. features ? high isolation voltage (bv = 3 750 vr.m.s.) ? sop (small outline package) type ? ordering number of taping product: ps2701a - 1 - f3, f4 : 3 500 pcs/reel ? pb - free product ? safety standards ? ul approved: no. e72422 ? csa approved: no. ca 101391 (ca5a, can/csa - c22.2 60065, 60950) ? din en60747 - 5 - 2 (vde0884 part2) approved : no. 40008902 (option) applications ? hybrid ic ? measuring instruments ? power supply ? programmable logic controllers < r >
data sheet pn10396ej0 5 v0ds 2 ps2701 a - 1 package dimensions (in millimeters) photocoupler construction parameter unit (min.) air distance 5 mm outer creepage distance 5 mm inner creepage distance 2.5 mm isolation distance 0.3 mm marking example pb - free spe cial version ( pb - free and halogen free ) < r > < r >
data sheet pn10396ej0 5 v0ds 3 ps2701 a - 1 ordering information part number order number solder plating specification packing style safety standard approval application part number *1 ps2701a - 1 ps2701a - 1 - a pb - free magazine case 100 pcs standard produc ts ps2701a - 1 ps2701a - 1 - f3 ps2701a - 1 - f3 - a embossed tape 3 500 pcs/reel (ul , csa approved) ps2701a - 1 - f4 ps2701a - 1 - f4 - a ps2701a - 1 - v ps2701a - 1 - v - a magazine case 100 pcs din en60747 - 5 - 2 ps2701a - 1 - v - f3 ps2701a - 1 - v - f3 - a embossed tape 3 500 pcs/reel ( vde0884 part2) ps2701a - 1 - v - f4 ps2701a - 1 - v - f4 - a approved (option) ps2701a - 1 ps2701a - 1y - a special version magazine case 100 pcs standard products ps2701a - 1 ps2701a - 1 - f3 ps2701a - 1y - f3 - a (pb - free and embossed tape 3 500 pcs/reel (ul , csa approved) ps2 701a - 1 - v ps2701a - 1y - v - a halogen free) magazine case 100 pcs din en60747 - 5 - 2 ps2701a - 1 - v - f3 ps2701a - 1y - v - f3 - a embossed tape 3 500 pcs/reel (vde0884 part2) approved (option) *1 for the application of the safety standard, following part number sh ould be used. < r >
data sheet pn10396ej0 5 v0ds 4 ps2701 a - 1 absolute maximum ratings (t a = 25 c, unless otherwise specified) parameter symbol ratings unit diode forward current (dc) i f 30 ma reverse voltage v r 6 v power dissipation derating p d / c 0.8 mw/ c power dissipation p d 80 mw pe ak forward current *1 i fp 0.5 a transistor collector to emitter voltage v ceo 70 v emitter to collector voltage v eco 5 v collector current i c 30 ma power dissipation derating p c / c 1.5 mw/ c power dissipation p c 150 mw isolation voltage *2 bv 3 750 vr.m.s. operating ambient temperature t a C 55 to +100 c storage temperature t stg C 55 to +150 c *1 pw = 100 s, duty cycle = 1% *2 ac voltage for 1 minute at t a = 25 c, rh = 60% between input and output . pins 1 - 2 shorted together, 3 - 4 shorted togethe r.
data sheet pn10396ej0 5 v0ds 5 ps2701 a - 1 electrical characteristics (t a = 25 c) parameter symbol conditions min. typ. max. unit diode forward voltage v f i f = 5 ma 1.2 1.4 v reverse current i r v r = 5 v 5 a terminal capacitance c t v = 0 v, f = 1.0 mhz 10 pf transistor collector to emitter dark current i ceo i f = 0 ma, v ce = 70 v 100 na coupled current transfer ratio (i c /i f ) *1 ctr i f = 5 ma, v ce = 5 v 50 300 % collector saturation voltage v ce (sat) i f = 10 ma, i c = 2 ma 0.13 0.3 v isolation resistance r i - o v i - o = 1.0 kv dc 10 11 isolation capacitance c i - o v = 0 v, f = 1.0 mhz 0.4 pf rise time *2 t r v cc = 5 v, i c = 2 ma, r l = 100 5 s fall time *2 t f 7 *1 ctr rank n: 50 to 300 (%) p: 150 to 300 (%) l: 100 to 300 (%) m: 50 to 150 (%) *2 test circuit for switching time
data sheet pn10396ej0 5 v0ds 6 ps2701 a - 1 typical characteristics (t a = 25 c, unless otherwise specified) remark the graphs indicat e nominal characteristics.
data sheet pn10396ej0 5 v0ds 7 ps2701 a - 1 remark the graphs indicate nominal characteristics.
data sheet pn10396ej0 5 v0ds 8 ps2701 a - 1 taping specifications (in millimeters)
data sheet pn10396ej0 5 v0ds 9 ps2701 a - 1 notes on handling 1. recommended soldering conditions (1) infrared reflow soldering ? peak reflow temperature 260 c or bel ow (package surface temperature) ? time of peak reflow temperature 10 seconds or less ? time of temperature higher than 220 c 60 seconds or less ? time to preheat temperature from 120 to 180 c 120 30 s ? number of reflows three ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) (2) wave soldering ? temperature 260 c or below (molten solder temperature) ? time 10 seconds or less ? preheating conditions 120 c or below (package surfac e temperature) ? number of times one (allowed to be dipped in solder including plastic mold portion.) ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) (3) soldering by soldering ir on ? peak temperature (lead part temperature) 350 c or below ? time (each pins) 3 seconds or less ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) (a) soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b) please be sure that the temperature of the package would not be heated over 100 c.
data sheet pn10396ej0 5 v0ds 10 ps2701 a - 1 (4) cautions ? fluxes avoid removing the residual flux with freon - based and chlorine - based cleaning solvent. 2. cautions regarding noise be aware tha t when voltage is applied suddenly between the photocouplers input and output or between collector - emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. 3. measurement conditions of current transfer ratios ( ctr ), which differ according to photocoupler check the setting values before use, since the forward current conditions at ctr measurement differ according to product. when using products other than at the specified forward current , the characteristics curves may differ from the standard curves due to ctr value variations or the like. this tendency may sometimes be obvious, especially below i f = 1 ma. therefore, check the characteristics under the actual operating conditions and tho roughly take variations or the like into consideration before use. usage cautions 1. protect against static electricity when handling. 2. avoid storage at a high temperature and high humidity.
data sheet pn10396ej0 5 v0ds 11 ps2701 a - 1 specification of vde marks license document paramet er symbol spec. unit climatic test class ( iec 60068 - 1/din en 60068 - 1 ) 55/1 0 0/21 dielectric strength maximum operating isolation voltage test voltage (partial discharge test, procedure a for type test and random test) u pr = 1.5 u iorm , p d 5 pc u iorm u pr 707 1 060 v peak v peak test voltage (partial discharge test, procedure b for all devices) u pr = 1.875 u iorm , p d 5 pc u pr 1 325 v peak highest permissible overvoltage u tr 6 000 v peak degree of pollution ( din en 60664 - 1 vde0110 part 1 ) 2 comparative tracking index ( iec 60112/din en 60112 (vde 0303 part 11) ) cti 175 material group ( din en 60664 - 1 vde0110 part 1 ) iii a storage temperature range t stg C 55 to +150 c operating temperature range t a C 55 to +1 0 0 c isolation resistance, min imum value v io = 500 v dc at t a = 25 c v io = 500 v dc at t a max. at least 100 c ris min. ris min. 10 12 10 11 safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) package temperature current (input current i f , psi = 0) power (output or total power dissipation) isolation resistance v io = 500 v dc at t a = tsi tsi isi psi ris min. 150 300 500 10 9 c ma mw < r >
data sheet pn10396ej0 5 v0ds 12 ps2701 a - 1
ps2701 a - 1 caution gaas products this product uses gallium arsenide (gaas). gaas vapor and powde r are hazardous to human health if inhaled or ingested, so please observe the following points. ? follow related laws and ordinances when disposing of the product. if there are no applicable laws and/or ordinances, dispose of the product as recommended bel ow. 1. commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. exclude the product from general industrial waste and household garbage, and ens ure that the product is controlled (as industrial waste subject to special control) up until final disposal. ? do not burn, destroy, cut, crush, or chemically dissolve the product. ? do not lick the product or i n any way allow it to enter the mouth.

▲Up To Search▲

Price & Availability of PS2701A-1-F3-P-A

	To Download PS2701A-1-F3-P-A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .