View WL12-2B560_1811157.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

supply voltage 10 to 30 v. insensitive to ambient light due to pulse modulation. complementary switching outputs for light of dark switching with short-circuit protection in npn or pnp models. available as through-beam photo- electric switch, photoelectric reflex switch, photoelectric proximity switch. photoelectric switches w12-2 series data sheet wl 12-2 wt 12-2 v x ws/we 12-2 0 ... 7 m 20 m photoelectric switches in stable metal housing. photoelectric proximity switches wt 12-2 with stepless adjust- able scanning distance and optional background or foreground suppression as well as sensitivity adjuster for large scanning distances. polarization filter for wl 12-2 photoelectric proximity switch. ws/we 12-2 through-beam photo- electric switches with test input for function monitoring. led signal strength indicator for soiling monitoring of the optics and as alignment help (blinking). available with fixed attached cable or 4 pole equipment plug. 35 ... 150 mm 20 ... 250 mm variable connection options on the back and bottom thanks to rotable equipment plug. n 80 ... 600 mm flexible mounting options thanks to dovetail clamp and longitudinal holes.
2 sick optic-electronic 41,5 15 49,2 2 5,1 7,3 22,6 5,6 ? 4,2 2 32 m12x1 11,2 1 led signal strength indicator 2 center of optical axis 3 mounting holes 4 threaded mounting hole m 4 C 4 deep 5 plug m 12 (rotatable by 90) or 2 m connection cable 6 sensitivity adjuster 2 6 5 1 1 connection diagram x 20 m scanning range ws/we 12-2 brn blu wht blk brown blue white black braun blau wei? schwarz features: l red-light emitter led as alignment aid l insensitive to ambient light sources (hf lamps, blinking alarm lights) l reliable functioning when devices mounted facing each other l switching frequency 1.5 khz l all-round reverse polarity protection at the inputs and outputs l outputs short-circuit protected l 90 rotatable m 12 equipment plug or 2 m cable l c 1 3 4 1 4 2 3 +10...30 v +10...30 v 0v 0v test test +10...30 v +10...30 v q q q q 0v 0v 0 v test +v q +v q q 0 v 0 v q brn blu wht brn blk wht blu ws 12-2 we 12-2 -n -p r l r l r l r l 2 046 8 10 12 14 16 18 20 10 1000 10000 100 1 y x [m] ws/we 12-2 operating reserve scanning range (m) 4 3
3 sick optic-electronic through-beam photoelectric switch ws/we 12-2 1) at t u = + 25c 2) must remain within v s tolerances 3) at t u = + 25c and 100 ma output current 4) signal run time with resitive load 5) with light/dark ratio 1:1 type ws/we 12-2 -p -n typical maximal range 20 m recommended operating range 15 m range with 2 mm orifice 2.0 m range with 1.5 mm orifice 1.5 m range with 1 mm orifice 1.0 m range with 0.5 mm orifice 0.5 m light source led, visible red light, average operating life 100 000 h 1) light spot in distance 400 mm at distance of 15 m supply voltage v s dc 10 ... 30 v (limit values) current consumption (without load) 15 ma, we; 30 ma, ws 25 ma, we; 30 ma, ws ripple 2) 5 v pp switching outputs pnp, q and q npn, q and q signal voltage high v s C 2.9 v v s signal voltage low 3) approx. 0 v 1.5 v output current i a max. 100 ma response time 4) , switching frequency 5) 330 s; 1500/s test input ti v s or unswitched, sender active 0 v sender inactive vde protection class 6) v enclosure rating ip 67 protection circuits 7) a, b, c ambient operating temperature t u 8) C 40 ... + 60 c storage temperature t l 8) C 40 ... + 75 c weight with equipment plug 120 g, with cable approx. 200 g 6) withstand voltage 50 v 7) a = inputs and outputs all-round reverse polarity protected b = outputs short-circuit protected c = interference pulse suppression 8) do not deform connecting cable below 0 c selection table plug m 12 cable transistor output type order no. rotatable 2 m pnp npn ll ws/we 12-2p430 1 016 157 ll ws/we 12-2n430 1 016 155 ll ws/we 12-2p130 1 016 156 ll ws/we12-2n130 1 016 154
4 sick optic-electronic connection diagram v 0 ... 7 m scanning range wl 12-2 brn blk blu wht brown black blue white braun schwarz blau wei? 2 1 5 6 features: l red-light emitter led as alignment aid l insensitive to ambient light (hf lamps, blinking alarm lights) l reliable functioning when devices mounted facing each other l switching frequency 1.5 khz l all-round reverse polarity protection at inputs and outputs l outputs short-circuit protected l 90 rotatable m 12 equipment plug or 2 m cable l c 41,5 15 49,2 2 5,1 7,3 22,6 5,6 ? 4,2 2 32 m12x1 11,2 4 3 0,5 0 1 1,5 2 2,5 3 3,5 4 4,5 5 5,5 6 6,5 7 10 1000 100 1 diam. grade/1 m pl20a/2 m pl80a/5 m pl30a/3 m c110/3 m pl50a/3,5 m pl40a /3,5 m y y b y g x [m] scanning range (m) wl 12-2 1 4 2 3 +10...30v +10...30v q q q q 0v 0v +v r l q +v r l q q r l 0v 0v r l q brn blk wht blu -n4 -p4 wl 12-2 -n1 -p1 -n npn -p pnp 1 1 led signal strength indicator 2 center of optical axis 3 mounting holes 4 threaded mounting hole m 4 C 4 deep 5 plug m 12 (rotatable by 90) or 2 m connection cable 6 sensitivity adjuster operating reserve
5 sick optic-electronic photoelectric reflex switch wl 12-2 1) must remain within v s tolerances 2) at t u = + 25 c 3) at t u = + 25 c and 100 ma output current 4) signal run time with resitive load selection table standard (f = ) focus (f = 90 mm) standard (f = ) focus (f = 90 mm) typical maximal range/on reflector 7 m/pl 80 a 2 m/pl 80 a 7 m/pl 80 a 2 m/pl 80 a recommended operating range with reflector pl 80 a 0 ... 5 m 0 ... 1.5 m 0 ... 5 m 0 ... 1,5 m with reflector c 110 0 ... 3 m 0 ... 3 m with reflector pl 50 a 0 ... 3.5 m 0 ... 3.5 m with reflector pl 40 a 0 ... 3.5 m 0 ... 3.5 m with reflector pl 30 a 0 ... 3 m 0 ... 3 m with reflector pl 20 a 0 ... 2 m 0 ... 2 m with ?diamond grade reflective tape 0 ... 1 m 0 ... 0.5 m 0 ... 1 m 0 ... 05 m (min. 100 x 100 mm 2 area) supply voltage v s dc 10 ... 30 v current consumption (without load) 30 ma 40 ma ripple 1) 5 v pp light source led, visible red light, average operating life 100 000 h 2) angle of dispersion approx. 1,5 light spot diameter 80 mm at distance 2 mm at distance 80 mm at distance 2 mm at distance of 3 m of 90 mm of 3 m of 90 mm switching outputs pnp, q and q npn, q and q signal voltage high v s C 2,9 v v s signal voltage low 3) approx. 0 v 1,5 v output current i a max. 100 ma response time 4) ; max. signal frequency 5) 330 s; 1000/s vde protection class 6) v enclosure rating ip 67 protection circuits 7) a, b, c ambient operating temperature t u 8) C 40 ... + 60 c storage temperature t l 8) C 40 ... + 75 c weight with equipment plug approx. 120 g, with connection cable approx. 200 g 5) with light/dark ratio 1:1 6) withstand voltage 50 v 7) a = inputs and outputs all-round reverse polarity protected b = outputs short-circuit protected c = interference pulse suppression 8) do not deform connecting cable below 0 c wl 12-2 -p -n lens cable m 12 plug transistor output type order no. 2 m rotable pnp npn standard (f = ) ll wl 12-2n130 1 016 085 ll wl 12-2p130 1 016 096 ll wl 12-2n430 1 016 092 ll wl 12-2p430 1 016 102 focus (f = 90 mm) ll wl 12-2n120 1 016 084 ll wl 12-2p120 1 016 095 ll wl 12-2p420 1 016 091 ll wl 12-2p420 1 016 101
6 sick optic-electronic connection diagram v 0 ... 4 m scanning range gra brn blu blk wht gray brown blue black white grau braun blau schwarz wei? features: l detection of glass and transpa- rent film l red-light emitter led as alignment aid l insensitive to amibient light sources (hf lamps, flashing alarm lamps) l reliable functioning when devices installed facing each other l switching frequency 1.5 khz l all-round reverse polarity protection at the inputs and outputs l outputs short-circuit protected l 90 rotatable m 12 equipment plug or 2 m cable l c wl 12-2b560 scanning range (m) wl 12-2b 0,5 0 1 1,5 2 2,5 3 3,5 4 4,5 5 10 100 1 pl30a/2 m pl50a/2,5 m y x [m] pl80a/3 m 1 led signal strength indicator 2 center of optics axis 3 mounting holes 4 threaded mounting hole m 4 C 4 deep 5 plug m 12 (rotatable by 90) or 2 m connection cable 6 sensitivity adjuster operating reserve 41,5 15 49,2 2 5,1 7,3 22,6 5,6 ? 4,2 2 32 m12x1 11,2 4 3 1 2 5 6 1 0 v r l q p r l +v 0 v l / d +v l / d 4 blk 2 wht 5 gra 3 blu 1 brn wl 12-2b560 0 v +10 ... 30 v q p q n q n l / d light-switching dark-switching
7 sick optic-electronic photoelectric reflex switch wl 12-2b560 with small switching hysteresis 1) must remain within v s tolerances 2) at t u = + 25 c 3) at t u = + 25 c and 100 ma output current 4) signal run time with resistive load 5) with light/dark ratio 1:1 6) withstand voltage 50 v 7) a = inputs and outputs all-round reverse polarity protected b = outputs short-circuit protected c = interference pulse suppression 8) do not deform connecting cable below 0 c wl 12-2 b560 part no. 1 016 080 typ. maximal range/on reflector 4 m/pl 80 a recommended operating range with reflector pl 80 a 0 ... 3.5 m with reflector c 110 0 ... 1.8 m with reflector pl 50 a 0 ... 2.0 m with reflector pl 40 a 0 ... 1.8 m with reflector pl 30 a 0 ... 1.6 m with reflector pl 20 a 0 ... 1.0 m with ?diamond grade reflective tape 0 ... 0.5 m (min. 100 x 100 mm 2 area) supply voltage v s dc 10 ... 30 v current consumption (without load) 30 ma ripple 1) 5 v pp light source led, visible red light, average operating life 100 000 h 2) angle of dispersion approx. 1.2 light spot diameter 30 mm at distance of 1.5 m switching outputs q p + q n output o p C pnp output q n C npn signal voltage high v s C 2.9 v v s signal voltage low approx. 0 v 1.5 v output current i a max. 100 ma operating mode light- or dark-switching, via control cable l/d switchable control input l/d 0 v or unswitched light-switching control input l/d v s dark-switching response time 4) , switching frequency, max. 5) 330 s; 1500/s vde protection class 6) v enclosure rating ip 67 protection circuits 7) a, b, c ambient operating temperature t u 8) C 40 ... + 60 c storage temperature t l 8) C 40 ... + 75 c weight approx. 120 g
8 sick optic-electronic connection diagram v 0 ... 7 m scanning range wl 12-2 asi features: l red-light emitter led as alignment aid l insensitive to ambient light (hf lamps, blinking alarm lights) l reliable functioning when devices mounted facing each other l switching frequency 1.5 khz l inputs reverse polarity protected l 90 rotatable m 12 equipment plug l c scanning range (m) wl 12-2 asi 0,5 0 1 1,5 2 2,5 3 3,5 4 4,5 5 5,5 6 6,5 7 10 1000 100 1 diam. grade/1 m pl20a/2 m pl80a/5 m pl30a/3 m c110/3 m pl50a/3,5 m pl40a /3,5 m y y b y g x [m] 41,5 15 49,2 2 5,1 7,3 22,6 5,6 ? 4,2 2 32 m12x1 11,2 4 3 1 2 5 6 1 1 led signal strength indicator 2 center of optical axis 3 mounting holes 4 threaded mounting hole m 4 C 4 deep 5 plug m 12 (rotatable by 90) or 2 m connection cable 6 sensitivity adjuster operating reserve wl 12-2z430 1 3
9 sick optic-electronic photoelectric reflex switch wl 12-2 asi 1) at t u = + 25 c 2) signal run time of sensor 3) with light/dark ratio 1:1 4) withstand voltage 50 v 5) a = inputs reverse polarity protected c = interference pulse suppression 6) do not deform connecting cable below 0 c wl 12-2 -z430 part no. 1 016 108 typ. maximal range/on reflector 7 m/pl 80 a recommended operating range with reflector pl 80 a 0 ... 5 m with reflector c 110 0 ... 3 m with reflector pl 50 a 0 ... 3.5 m with reflector pl 40 a 0 ... 3.5 m with reflector pl 30 a 0 ... 3 m with reflector pl 20 a 0 ... 2 m with ?diamond grade reflective tape 0 ... 1 m (min. 100 x 100 mm 2 area) supply voltage v s dc 26,5 ... 31.6 v current consumption 35 ma light source led, visible red light, average operating life 100 000 h 1) angle of dispersion 1.5 light spot diameter 80 mm at distance of 3 mm response time 2) , switching frequency max. 3) 330 s; 1500/s vde protection class 4) v enclosure rating ip 67 protection circuits 5) a, c ambient operating temperature t u 6) C 25 ... + 60 c storage temperature t l 6) C 40 ... + 75 c weight approx. 120 g * default setting 0 1 allocation data bits (host level) allocation parameter bits (host level) d 0 switching state 0 no reflection input 1 reflection d 1 vma 0 active input 1 inactive d 2 nc 0 input 1 d 3 * test function 0 sender on output 1 sender off p 0 * nc 0 parameter 1 p 1 * light-/dark- 0 dark-switching parameter switch 1 light-switching p 2 * nc 0 parameter 1 p 3 * nc 0 parameter 1
10 sick optic-electronic connection diagram 35 ... 150 mm adjustable scanning distance wt 12-2 2 3 1 7 6 1 led signal strength indicator 2 optical axis C receiver 3 optical axis C sender 4 mounting holes 5 threaded mounting holes m 4 C 4 deep 6 m12 plug (rotable by 90) or 2 m connection cable 7 scanning distance adjuster features: l red-light emitter led as alignment aid l foreground suppression l adjustable scanning distance l insensitive to ambient light (hf lamps, blinking warning lights) l reliable functioning with devices facing each other l switching frequency 1.5 khz l all-round reverse polarity protection at the inputs and outputs l outputs short-circuit protected l 90 rotable m 12 equipment plug or 2 m cable l c brn blu blk wht brown blue black white braun blau schwarz wei? 41,5 15 49,2 2 5,1 7,3 22,6 5,6 ? 4,2 30,4 15 m12x1 11,2 1 5 4 1 4 2 3 +10...30v +10...30v q q q q 0v 0v +v r l q +v r l q q 0v 0v r l q brn blk wht blu -n4 -p4 wt 12-2 -n1 -p1 -n npn -p pnp r l set scanning distance (mm) wt 12-2 0 x [mm] y [%] -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 20 40 80 60 100 30 50 70 90 90% / 90% 18% / 90% 6% / 90% scanning displacement
11 sick optic-electronic photoelectric proximity switch wt 12-2 with foreground suppression 1) object with 6 % reflection (based on white standard to din 5033) 2) limit value 3) must remain within v s tolerances 4) at t u = + 25 c 5) at t u = + 25 c and 100 ma output current 6) signal run time with resitive load wt 12-2 -p -n selection table scanning range, adjustable 1) 35 ... 150 mm supply voltage v s 2) dc 10 ... 30 v current consumption (without load) 30 ma 40 ma ripple 3) 5 v pp light source led, visible red light, average operating life 100 000 h 4) light spot diameter 2 mm at distance of 60 mm switching outputs pnp, q and q npn, q and q signal voltage high v s C 2,9 v v s signal voltage low 3) approx. 0 v 1,5 v output current i a max. 100 ma response time, max. 6) ; switching frequency, max. 7) 330 s; 1500/s vde protection class 8) v enclosure rating ip 67 protection circuits 9) a, b, c ambient operating temperatue t u 10) C 40 ... + 60 c storage temperatue t l 10) C 40 ... + 75 c weight with equipment plug approx. 120 g, with connection cable approx. 200 g 7) with light/dark ratio 1:1 8) withstand voltage 50 v 9) a = inputs and outputs all-round reverse polarity protected b = outputs short-circuit protected c = interference pulse suppression 10) do not deform connecting cable below 0 c m 12 plug cable transistor output type order no. rotable 2 m pnp npn ll wt 12-2p440 1 016 150 ll wt 12-2n440 1 016 146 ll wt 12-2p140 1 016 148 ll wt 12-2n140 1 016 145
12 sick optic-electronic connection diagram 20 ... 250 mm adjustable scanning distance wt 12-2 features: l led light source, visible red light or infrared sender light l background suppression l adjustable scanning distance l insensitive to ambient light (hf lamps, blinking warning lights) l reliable functioning with devices facing each other l switching frequency 1,5 khz l all-round reverse polarity protection at the inputs and outputs l outputs short-circuit protected l 90 rotable m 12 equipment plug oder 2 m cable l c brn blu blk wht brown blue black white braun blau schwarz wei? 1 4 2 3 +10...30v +10...30v q q q q 0v 0v +v r l q +v r l q q 0v 0v r l q brn blk wht blu -n4 -p4 wt 12-2 -n1 -p1 -n npn -p pnp r l scanning distance (mm) wt 12-2 20 22 y [%] x [mm] 18 16 14 12 10 8 6 4 2 0 0 50 150 100 200 250 300 6%/90% 18%/90% 90%/90% 1 led signal strength indicator 2 optical axis C receiver 3 optical axis C sender 4 mounting holes 5 threaded mounting hole m 4 C 4 deep 6 plug m 12 (rotatable by 90) or 2 m connection cable 7 scanning distance adjuster 3 1 7 6 2 41,5 15 49,2 2 5,1 7,3 22,6 5,6 ? 4,2 29,9 21,3 m12x1 11,2 1 5 4 scanning distance displacement
13 sick optic-electronic photoelectric proximity switch wt 12-2 with background suppression 1) object with 6/18 % reflection (based on white standard to din 5033) 2) must remain within v s tolerances 3) atut u = + 25 c 4) at t u = + 25 c and 100 ma output current 5) signal run time with resitive load 6) with light/dark ratio 1:1 wt 12-2 -p -n selection table scanning distance, adjustable 1) 20 ... 250 mm scanning distance 5 ... 20 mm and 5 ... 250 mm supply voltage v s dc 10 ... 30 v (limit values) current consumption (without load) 40 ma infrared / 30 ma rot 50 ma infrared / 40 ma rot ripple 2) 5 v pp light source led, infrared or visible red light (see selection table), average operating life 100 000 h 3) light spot diameter 10 mm at distance of 200 mm switching outputs pnp, q and q npn, q and q signal voltage high v s C 2.9 v v s signal voltage low 4) approx. 0 v 1.5 v output current i a max. 100 ma response time, max. 5) ; switching frequency, max. 6) 330 s; 1500/s vde protection class 7) v enclosure rating ip 67 protection circuits 8) a, b, c ambient operating temperature t u 9) C 40 ... + 60 c storage temperature t l 9) C 40 ... + 75 c weight with equipment plug approx. 120 g, with connection cable approx. 200 g 7) withstand voltage 50 v 8) a = inputs and outputs all-round reverse polarity protected b = outputs short-circuit protected c = interference pulse suppression 9) do not deform connecting cable below 0 c cable m 12 plug sender light transistor output type order no. 2 m rotable ir red light pnp npn ll l wt 12-2n110 1 016 118 lll wt 12-2p110 1 016 126 ll l wt 12-2n410 1 016 124 ll l wt 12-2p410 1 016 131 lll wt 12-2n130 1 016 122 lll wt 12-2p130 1 016 129 lll wt 12-2n430 1 016 125 lll wt12-2p430 1 016 134
14 sick optic-electronic connection diagram 80 ... 600 mm adjustable scanning distance wt 12-2 7 1 3 6 2 features: l red-light emitter led as alignment aid l adjustable scanning distance l insensitive to ambient light (hf lamps, blinking warning lights) l reliable functioning with devices facing each other l switching frequency 1.5 khz l all-round reverse polarity protection at the inputs and outputs l outputs short-circuit protected l 90 rotable m 12 equipment plug or 2 m cable l c brn blu blk wht brown blue black white braun blau schwarz wei? 41,5 15 49,2 2 5,1 7,3 22,6 5,6 ? 4,2 30,5 22,5 m12x1 11,2 1 5 4 scanning distance (mm) wt 12-2 100 y x [mm] ybm 10 1 10 100 1000 90% 90% n 1 led signal strength indicator 2 optical axis C receiver 3 optical axis C sender 4 mounting holes 5 threaded mounting hole m 4 C 4 deep 6 plug m 12 (rotatable by 90) or 2 m connection cable 7 scanning distance adjuster 1 4 2 3 +10...30v +10...30v q q q q 0v 0v +v r l q +v r l q q 0v 0v r l q brn blk wht blu -n4 -p4 wt 12-2 -n1 -p1 -n npn -p pnp r l operating reserve
15 sick optic-electronic phototelectric proximity switch wt 12-2 energetic wt 12-2 -p -n selection table scanning distance, adjustable 1) 80 ... 600 mm supply voltage v s dc 10 ... 30 v (limit values) current consumption (without load) 30 ma 40 ma ripple 2) 5 v pp light source led, visible red light, average operating life 100 000 h 3) light spot diameter 30 mm at distance of 600 mm switching outputs pnp, q and q npn, q and q signal voltage high v s C 2.9 v v s signal voltage low 4) approx. 0 v 1.5 v output current i a max. 100 ma response time 5) , switching frequency max. 6) 330 s; 1500/s vde protection class 7) v enclosure rating ip 67 protection circuits 8) a, b, c ambient operating temperature t u 9) C 40 ... + 60 c storage temperature t l 9) C 40 ... + 75 c weight with equipment plug approx. 120 g, with connection cable approx. 200 g 1) object with 90 % reflection (based on white standard to din 5033) 2) must remain within v s tolerances 3) at t u = + 25 c 4) at t u = + 25 c und 100 ma output current 5) signal run time with resistive load 6) with light/dark relationship 1:1 7) withstand voltage 50 v 8) a = inputs and outputs reverse polarity protected b = outputs short-circuit protected c = interference pulse suppression 9) do not deform connecting cable below 0 c cable plug m 12 transistor output type order no. 2 m rotable pnp npn ll wt 12-2n150 1 016 138 ll wt 12-2p150 1 016 140 ll wt 12-2n450 1 016 139 ll wt 12-2p450 1 016 142
16 sick optic-electronic connection diagram wt 12-2 asi adjustable scanning distance features: l led- light source with visible red light l background suppression l adjustable scanning distance l insensitive to ambient light (hf lamps, blinking alarm lights) l reliable functioning when devices mounting facing each other l inputs reverse polarity protected l switching frequency 1.5 khz l 90 rotable m 12 equipment plug or 2 m cable l c 20 ... 250 mm scanning distance (mm) wt 12-2 3 1 7 6 2 41,5 15 49,2 2 5,1 7,3 22,6 5,6 ? 4,2 29,9 21,3 m12x1 11,2 1 5 4 1 led signal strength indicator 2 optical axis C receiver 3 optical axis C sender 4 mounting holes 5 threaded mounting hole m 4 C 4 deep 6 plug m 12 (rotatable by 90) or 2 m connection cable 7 scanning distance adjuster scanning distance displacement 20 22 y [%] x [mm] 18 16 14 12 10 8 6 4 2 0 0 50 150 100 200 250 300 6%/90% 18%/90% 90%/90% wt 12-2z430 1 3
17 sick optic-electronic photoelectric proximity switch wt 12-2 asi with background suppression wt 12-2 -z430 part no. 1 016 136 scanning distance, adjustable 1) 20 ... 250 mm scanning range 5 ... 20 mm und 5 ... 250 mm supply voltage v s dc 26.5 ... 31.5 v current consumption 35 ma light source led, visible red light, average operating life 100 000 h 2) light spot diameter 10 mm at distance of 200 mm response time 3) , max. switching frequency 4) 330 s; 1500/s vde protection class v enclosure rating ip 67 circuit protection 5) a, b, c ambient operating temperature t u 6) C 25 ... + 60 c storage temperature t l 6) C 40 ... + 75 c weight approx. 120 g 1) object with 90 % reflection (based on white standard to din 5033) 2) at t u = + 25 c 3) signal run time of sensor 4) with light/dark ratio 1:1 5) a = inputs reverse polarity protected c = interference pulse protection 6) do not deform connecting cable below 0 c allocation data bits (host level) d 0 switching state 0 no reflection input 1 reflection d 1 vma 0 active input 1 inactive d 2 nc 0 input 1 d 3 * test function 0 sender on output 1 sender off allocation parameter bits (host level) p 0 * nc 0 parameter 1 p 1 * light/dark- 0 dark-switching parameter switching 1 light-switching p 2 * nc 0 parameter 1 p 3 * nc 0 parameter 1 * default setting 0 1
great britain erwin sick optic-electronic ltd. waldkirch house 39 hedley road, st. albans hertfordshire al1 5bn phone +44 17 27-83 11 21 fax +44 17 27-85 67 67 8 008 551.0498 hjs . bw printed in germany subject to change without prior notice printed on chlorine-free bleached pape r sick optic-electronic sick optic-electronic usa sick optic-electronic, inc. 6900 west 110th street bloomington, mn 55438 phone +1 612 941-67 80 fax +1 612 941-92 87 wats: 1-800-325-7425 reflector pl 30 a (order no. 1 002 314) accessories reflector pl 50 a (order no. 1 000 132) reflector pl 80 a (order no. 1 003 865) reflector pl 20 a (order no. 1 012 719) reflector pl 40 a (order no. 1 012 720) small mounting bracket for series w 12-2 (order no. 2 012 938) large mounting bracket for series w 12-2 (order no. 2 013 942) terminal clamp for series w 12-2 (2 pieces required) (order no. 2 013 285) double terminal clamp (order no. 2 013 947) diamond grade reflective tape (order no. 4 019 634) cable receptacle, angular 5 pole with sprayed cable (order no. 6 008 900) cable receptacle, straight 5 pole with sprayed cable (order no. 6 008 899) cable receptacle, angular (order no. 6 007 303) dc cable receptacle, straight (order no. 6 007 302) dc australia erwin sick optic-electronic pty. ltd. head office, p.o. box 214 899 heidelberg road ivanhoe, vic. 3079 australia phone +61 39 49 74 10 0 (0 08) 33 48 02 - toll free fax +61 39 49 71 18 7

▲Up To Search▲

Price & Availability of WL12-2B560

	To Download WL12-2B560 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .