www.sunled.com published date : feb 28,2008 drawing no : sdsa4590 v3 checked : b.l. liu p.1/4 part number: ZMDK48WA sot-23 surface mount led lamp notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3.specifications are subject to change without notice. part number emitting color emitting material lens-color luminous intensity (if=20ma) mcd wavelength nm p viewing angle 2 1/2 min. typ. ZMDK48WA red ingaalp water clear 70 148 650 140 features z sot-23 package surface mount led lamp. z low power consumption. z long life - solid state reliability. z package: 2000pcs / reel. z moisture sensitivity level : level 3. z rohs compliant. absolute maximum ratings (t a =25c ) mdk (ingaalp) unit reverse voltage v r 5 v forward current i f 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 185 ma power dissipation p t 75 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 mdk (ingaalp) unit forward voltage (typ.) (i f =20ma) v f 1.95 v forward voltage (max.) (i f =20ma) v f 2.5 v reverse current (max.) (v r =5v) i r 10 ua wavelength of peak emission (typ.) (i f =20ma) p 650 nm wavelength of dominant emission (typ.) (i f =20ma) d 635 nm spectral line full width at half-maximum (typ.) (i f =20ma) ? 28 nm capacitance (typ.) (v f =0v, f=1mhz) c 35 pf operating characteristics (t a =25c )
www.sunled.com published date : feb 28,2008 drawing no : sdsa4590 v3 checked : b.l. liu p.2/4 part number: ZMDK48WA sot-23 surface mount led lamp ? mdk
www.sunled.com published date : feb 28,2008 drawing no : sdsa4590 v3 checked : b.l. liu p.3/4 part number: ZMDK48WA sot-23 surface mount led lamp ? recommended soldering pattern (units : mm; tolerance: 0.1) ? tape specification (units : mm) ? the device has a single mounting surface. the device must be mounted according to the specifications . remarks: if special sorting is required (e.g. binning based on forward vo ltage, luminous intensity / luminous flux or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
www.sunled.com published date : feb 28,2008 drawing no : sdsa4590 v3 checked : b.l. liu p.4/4 part number: ZMDK48WA sot-23 surface mount led lamp packing & label specifications ZMDK48WA
|