document number: 23102 for technical questions, contact: ceramitesupport@vishay.com www.vishay.com revision: 04-jun-09 1 ac line rated disc capacitors class x1, 400 vac/class y1, 500 vac 440l series vishay cera-mite lo? = 0.158" (4.0 mm) typ. i nsulation resistance min. 1000 f tolerance on capacitance 10 %; 20 % dissipation factor 2.0 % max. at 1 khz; 1 v ceramic dielectric c0g, u2j, p3k, r3l (class 1) x7r, y5u (class 2) category temperature range - 25 c to + 125 c operating temperature range - 30 c to + 125 c climatic category acc. to en60068-1 25/125/21 features ? worldwide safety agency recognition underwriters laboratories - ul 1414 and ul 1283 canadian standards association - csa 22.2 european en132400 to iec 60384-14 second edition ? complete range of capacitance values ? radial leads ? compliant to rohs directive 2002/95/ec applications ? required in ac power supply and filter applications ? specific industry requirements design the capacitors consist of a cera mic disc of which both sides are silver-plated. connection leads are made of tinned copper having a diameter of 0.032" (0.81 mm). the capacitors may be supplied with radial kinked or straight leads having a lead spacing of 0.375" (9.5 mm). the standard tolerances are 10 % or 20 %. coating is made of flame retardant epoxy resin in accordance with ?ul 94 v-0?. capacitance range 10 pf to 0.01 f rated voltage u r iec 60384-14.2 (y1): 500 vac, 50 hz iec 60384-14.2 (x1): 400 vac, 50 hz ul 1414: 250 vac, 60 hz ul 1283: 600 vac, 60 hz csa 22.2: 250 vac, 60 hz dielectric strengt h between leads component test: 4000 vac, 50 hz, 2 s as repeated test admissible only once with: 3600 vac, 50 hz, 2 s random sampling test (destructive test): 4000 vac, 50 hz, 60 s dielectric stren gth of body insulation 4000 vac, 50 hz, 60 s (destructive test) 0.125" max. (3.2 mm) tinned copper leads 1.250" min. (32 mm) t max. ls lo d max. ?
440l series vishay cera-mite ac line rated disc capacitors class x1, 400 vac/class y1, 500 vac www.vishay.com for technical questions, contact: ceramitesupport@vishay.com document number: 23102 2 revision: 04-jun-09 notes ? alternate lead spacings are avail able bulk or tape and reel on request. ? european required minimum lead clearance (pre vents use of inside crimp) 0.315" (8 mm) tape and reel options ? to specify tape and reel, add two letter suffix to the orderi ng code (for details of the pack aging code see general section o f the catalog) ordering information, ce ramic x1/y1 capacitors 440l c (pf) tol. (%) d diameter t thickness wire size ls lead space ordering code awg inch (mm) c0g 10 10 % 0.330 (8.4) 0.195 (5.0) 20 0.032 (0.81) 0.375 (9.5) 440lq10-r u2j 15 10 % 0.330 (8.4) 0.210 (5.3) 20 0.032 (0.81) 0.375 (9.5) 440lq15-r p3k 22 10 % 0.330 (8.4) 0.190 (4.8) 20 0.032 (0.81) 0.375 (9.5) 440lq22-r r3l 33 10 % 0.330 (8.4) 0.200 (5.1) 20 0.032 (0.81) 0.375 (9.5) 440lq33-r 47 10 % 0.330 (8.4) 0.180 (4.6) 20 0.032 (0.81) 0.375 (9.5) 440lq47-r x7r 68 10 % 0.330 (8.4) 0.220 (5.6) 20 0.032 (0.81) 0.375 (9.5) 440lq68-r 100 0.220 (5.6) 440lt10-r 150 0.235 (6.0) 440lt15-r 220 0.235 (6.0) 440lt22-r 330 0.225 (5.7) 440lt33-r y5u 470 20 % 0.330 (8.4) 0.230 (5.8) 20 0.032 (0.81) 0.375 (9.5) 440lt47-r 560 0.330 (8.4) 0.230 (5.8) 440lt56-r 680 0.330 (8.4) 0.235 (6.0) 440lt68-r 1000 0.365 (9.3) 0.220 (5.6) 440ld10-r 1500 0.365 (9.3) 0.220 (5.6) 440ld15-r 2000 0.400 (10.2) 0.220 (5.6) 440ld20-r 2200 0.430 (10.9) 0.225 (5.7) 440ld22-r 2700 0.460 (11.7) 0.225 (5.7) 440LD27-R 2800 0.460 (11.7) 0.220 (5.6) 440ld28-r 3000 0.490 (12.4) 0.225 (5.7) 440ld30-r 3200 0.490 (12.4) 0.220 (5.6) 440ld32-r 3300 0.490 (10.9) 0.215 (5.5) 440ld33-r 3900 0.530 (13.5) 0.220 (5.6) 440ld39-r 4000 0.530 (13.5) 0.220 (5.6) 440ld40-r 4700 0.620 (15.7) 0.230 (5.8) 440ld47-r 5000 0.620 (15.7) 0.225 (5.7) 440ld50-r 5500 0.680 (17.3) 0.230 (5.8) 440ld55-r 5600 0.680 (17.3) 0.230 (5.8) 440ld56-r 6800 0.720 (18.3) 0.235 (6.0) 440ld68-r 8000 0.720 (18.3) 0.220 (5.6) 440ld80-r 9000 0.790 (20.1) 0.225 (5.7) 440ld90-r 0.01 f 0.850 (21.6) 0.230 (5.8) 440ls10-r
document number: 23102 for technical questions, contact: ceramitesupport@vishay.com www.vishay.com revision: 04-jun-09 3 440l series ac line rated disc capacitors class x1, 400 vac/class y1, 500 vac vishay cera-mite leakage current vs. voltage (typical) insertion loss vs. frequency (typical) 0 20 40 60 8 0 100 0 1000 2000 3000 4000 ac voltage (v) rms leakage current (ma) rms 440lq47- r 440lq10- r 440lq15- r 440lq22- r 440lq33- r frequency (mhz) insert ion loss (db) 1 100 10 2 3 4 5 10 20 30 40 50 10 100 440lq47-r 440lq10-r 440lq15-r 440lq22-r 440lq33-r 1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0. 8 0.9 1 0 1000 2000 3000 4000 ac voltage (v) rms leakage current (ma) rms 440lt6 8 -r 440lt15-r 440lt22-r 440lt33-r 440lt47-r 440lt56-r 440lq6 8 -r 440lt10-r frequency (mhz) insertion loss (db) 10 100 10 20 30 40 50 100 1 440lq6 8 -r 440lt10-r 440lt15-r 440lt22-r 440lt6 8 -r 440lt56-r 440lt47-r 440lt33-r 0 0.5 1 1.5 2 2.5 3 0 500 1000 1500 2000 2500 3000 3500 4000 ac voltage (v) rms leakage current (ma) rms 440ld32-r 440lt47-r 440lt56-r 440ld10-r 440ld15-r 440ld20-r 440ld22-r 440LD27-R 440ld2 8 -r 440ld30-r 440lt6 8 -r frequency (mhz) insert ion loss (db) 10 1000 100 20 30 40 50 100 1 10 440ld32-r 440ld30-r 440ld2 8 -r 440LD27-R 440ld10-r 440ld15-r 440ld20-r 440ld22-r 0 2 4 6 8 10 0 1000 2000 3000 4000 ac voltage (v) rms leakage current (ma) rms 440ls10-r 440ld30-r 440ld39-r 440ld50-r 440ld55-r 440ld56-r 440ld6 8 -r 440ld 8 0-r 440ld90-r 440ld47-r 440ld40-r frequency (mhz) insert ion loss (db) 10 1000 100 20 30 40 50 100 1 10 440ld33-r 440ld39-r 440ld40-r 440ld47-r 440ld50-r 440ld55-r 440ld56-r 440ld6 8 -r 440ld 8 0-r 440ld90-r 440ls10-r 60 70 8 0 90
440l series vishay cera-mite ac line rated disc capacitors class x1, 400 vac/class y1, 500 vac www.vishay.com for technical questions, contact: ceramitesupport@vishay.com document number: 23102 4 revision: 04-jun-09 note 1 ul 1414 across-the-line, antenna coupl ing, and line-by-p ass capacitors: ? across-the-line - a c apacitor connected either across a supply circuit or between one si de of a supply circuit and a conductiv e part that may be connected to earth ground. ? antenna-coupling - a capacitor con nected from an antenna terminal to circuits within an appliance. ? line-by-pass - a capacitor connect ed between one side of a supply circui t and an accessible conductive part. note 2 iec 60384-14 subclass y capacitors: ? a capacitor of a type suitable for use in situations where fa ilure of the capacitor could le ad to danger of electric shock. ? class y capacitors are divided into sub- classes based on type of in sulation bridged and voltage ranges. ? for definitions of basic, supplem entary, double and reinforced insu lation, see iec publication 536. ? subclass y capacitors may be used in applicat ions which require a subclass x rating. note 3 iec 60384-14 subclass x capacitors: ? a capacitor of a type suitable for use in situations where failure of the capacitor in situations where failure of the capacit or would not lead to danger of electric shock. ? class x capacitors are divided into subclasses according to the peak impul se test voltage superimposed on the main voltage. approvals iec 60384 - 14/2nd issue (1993) in cl. am. 1 (1995) - safety tests en 132 400 (1994) - safety tests that approval to g ether with cb test certificate substitutes the national approval of the followin g nations: belgium france italy austria china japan spain denmark greece luxembourg portugal singapore poland united kingdom germany ireland netherlands sweden slovenia hungaria czech republic finland iceland norway switzerland korea israel y1 capacitor: cb-test certificate: de 1-19452 10 pf... 0.01 f 500 v ac x1 capacitor: cb-test certificate: de 1-19452 10 pf... 0.01 f 400 v ac underwriters laboratories ul 1414 across-the-line, antenna-coupling and line-by-pass component.10 pf... 0.01 f agency file/license e99264 v2s2 250 v ac ul 1283 emi filters 10 pf... 0.01 f agency file/license e128046 v1s2 600 v ac canadian standards association csa c22.2 across-the-line, isolation capacitor 10 pf... 0.01 f no. 1-98 agency file/license lr 62016-12 250 v ac no. 1-94 across-the-line, line to ground, isolation capacitor 100 pf... 0.01 f agency file/license lr 62016-1 250 v ac marking 272m 440l y1 500 ~ x1 400 ~ cm 125 c
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
