View 222268E11_2014288.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1998 mar 27 6 philips components preliminary speci?cation film dielectric trimmers 2222 808 ..... ? 5 mm features housing diameter 5 mm top and bottom or top adjustment round or hexagonal head vertical version. applications for consumer and industrial equipment. description the vanes of the trimmer are stacked on a sturdy plastic base. the colour of the base indicates the maximum capacitance (see tables 4, 5 and 6). the dielectric is a film of polypropylene (pp) or polytetrafluorethylene (ptfe) for the standard versions and polycarbonate (pc) for the economic and hexagonal head versions. the dielectric supports the vanes in such a way that good stability is ensured and no microphony can occur. flux absorption between the vanes is prevented. cleaning with solvents is not advised. for outline drawings and dimensions see figs 1 and 2. quality level sampling and data evaluation for quality level in accordance with mil-std-105d and iec 60410 : <0.15% major defects <0.65% minor defects. each capacitor is tested for minimum c max and is also subjected to the full test voltage. quick reference data mechanical data description value c min /c max 0.35/1.5 to 4/27 pf rated voltage (dc) 150 v test voltage (dc) for 1 minute 300 v maximum contact resistance 10 m w minimum insulation resistance 10000 m w ta n d at c max , 1 mhz: pc 70 10 - 4 pp, ptfe 10 10 - 4 category temperature range: pp - 40 to +70 c pc, ptfe - 40 to +85 c climatic category (iec 60068): pp 40/070/21 pc, ptfe 40/085/21 minimum storage temperature - 55 c related speci?cation iec 60418-1 and 4 description value effective angle of rotation 180 operating torque: c max < 20 pf 1 to 15 mnm c max 3 20 pf 1 to 25 mnm maximum axial thrust 2 n
1998 mar 27 7 philips components preliminary speci?cation film dielectric trimmers 2222 808 ..... ? 5 mm fig.1 trimmers 2222 808 ..... series, with round head. dimensions in mm. for dimensions h, w and l, see tables 1 and 2. for dimension p, see table 3. (1) the position of the shaft is not relative to the position of the vanes. a. dimensional outlines. b. hole pattern. handbook, full pagewidth 3 + 0.7 - 0.5 0.3 + 0.1 0 0.4 + 0.2 0 1.15 max. 5.6 0.2 2.2 0.2 3 0.5 5.1 0.2 1.6 0.2 l w h ? 2.2 0.6 (1) (1) 0.5 ccb130 handbook, halfpage 1.3 p ccb131
1998 mar 27 8 philips components preliminary speci?cation film dielectric trimmers 2222 808 ..... ? 5 mm fig.2 trimmers 2222 808 ..... series, with hexagonal head. dimensions in mm. for dimensions h, w and l, see table 2. for dimension p, see table 3. a. dimensional outlines. handbook, full pagewidth 1.15 max. 5.6 0.2 2.2 0.2 3 0.5 l w h 1.91 0.6 2.1 0.65 ccb132 handbook, halfpage 1.3 p ccb131 b. hole pattern.
1998 mar 27 9 philips components preliminary speci?cation film dielectric trimmers 2222 808 ..... ? 5 mm table 1 standard versions; capacitance and relevant physical dimensions; see fig.1 table 2 hexagonal and economic versions; relevant physical dimensions; see fig.2 c min /c max (pf) h max (mm) w max (mm) l max (mm) 0.35/1.5 7.0 5.5 7.3 1.5/5 7.0 5.5 7.3 3/10 7.0 5.5 7.3 3/15 8.8 5.5 7.3 4/20 8.8 5.5 7.3 4/27 9.0 6.2 7.8 type of head h max (mm) w max (mm) l max (mm) hexagonal 9.7 5.5 7.3 round 7.7 5.5 7.3 mounting the trimmer has a lead pitch of 5.08 mm or 5.6 mm and can be mounted on printed-circuit boards with a minimum hole diameter of 1.25 mm. packaging bulk packaged in cardboard boxes lined with expanded plastic, 1000 units per box.
1998 mar 27 10 philips components preliminary speci?cation film dielectric trimmers 2222 808 ..... ? 5 mm ordering information table 3 selection chart; see figs 1 and 2 c min /c max (pf) catalogue number 2222 808 ..... top and bottom adjustment (p = 5.6 mm) top adjustment only (p = 5.6 mm) top adjustment only (p = 5.08 mm) standard versions: polytetra?uorethylene, round head 0.35/1.5 22158 -- standard versions: polypropylene, round head 1.5/5 23508 - 20508 3/10 23109 - 20109 3/15 23159 - 20159 4/20 23209 - 20209 4/27 23279 - 20279 economic versions: polycarbonate, round head 1.5/7 - 20126 - 1.6/15 - 20127 - 3/20 - 20123 - 3.5/27 - 20128 - economic versions: polycarbonate, hexagonal head 1.5/7 - 21708 - 1.6/15 - 21159 - 3/20 - 21209 - 3.5/27 - 21279 -
1998 mar 27 11 philips components preliminary speci?cation film dielectric trimmers 2222 808 ..... ? 5 mm electrical data table 4 standard versions with round head note 1. c: 60% to 80% of c max ; t amb : from +20 c to +70 c. table 5 economic versions with round head table 6 versions with hexagonal head guaranteed max. c min / min. c max at 200 khz (pf) tan d at c max 10 - 4 temp. coeff. (1) (10 - 6 /k) min. f res at c max (mhz) colour of base smallest packaging quantity catalogue number 1 mhz 100 mhz 0.35/1.5 10 -- 450 550 -- 1000 2222 808 22158 1.5/5 10 25 - 200 550 700 grey 1000 2222 808 20508 2222 808 23508 3/10 10 25 - 250 550 500 yellow 1000 2222 808 20109 2222 808 23109 3/15 10 25 - 250 550 400 blue 1000 2222 808 20159 2222 808 23159 4/20 10 25 - 250 400 300 green 1000 2222 808 20209 2222 808 23209 4/27 10 25 - 250 400 300 red 1000 2222 808 20279 2222 808 23279 reference c min /c max (pf) tan d at c max 10 - 4 (1 mhz) temp. coeff. (10 - 6 /k) colour of base smallest packaging quantity catalogue number 1.5/7 70 - 50 550 grey 1000 2222 808 20126 1.6/15 70 - 50 550 blue 1000 2222 808 20127 3/20 70 - 50 550 green 1000 2222 808 20123 3.5/27 70 - 100 400 red 1000 2222 808 20128 reference c min /c max (pf) tan d at c max 10 - 4 (1 mhz) temp. coeff. (10 - 6 /k) colour of base smallest packaging quantity catalogue number 1.5/7 70 - 50 550 grey 1000 2222 808 21708 1.6/15 70 - 50 550 blue 1000 2222 808 21159 3/20 70 - 50 550 green 1000 2222 808 21209 3.5/27 70 - 100 400 red 1000 2222 808 21279
1998 mar 27 12 philips components preliminary speci?cation film dielectric trimmers 2222 808 ..... ? 5 mm tests and requirements table 7 test procedures and requirements iec 60418-1 clause iec 60068 test method test procedure requirements 4.2 method of mounting method a 14 capacitance drift after tc measurement d c/c: 3% for c max 10 pf d c/c: 2% for c max > 10 pf 19 thrust axial thrust of 2 n d c/c: 0.4% 21 robustness of terminations: 21.1 ua tensile 1 n no damage 21.2 ub bending 1 cycle no damage 22 na rapid change of temperature 1 cycle; 0.5 hours at lower and 0.5 hours at upper category temperature d c/c: 2.5% 23 t soldering: ta solderability solder bath immersion 3 mm; 235 c; 2 s good wetting no mechanical damage tb resistance to heat solder bath: 260 c; 10 s no mechanical damage 24 eb impact bump 4000 10 bumps; 40 g; 6 ms d c/c: 1%; no mechanical damage 25 fc vibration frequency 10 to 55 hz; amplitude 0.75 mm; 1.5 hours d c/c: 1%; no mechanical damage 26 climatic sequence: d c/c: 4% 26.1 b dry heat 16 hours at upper category temperature tan d for pp and ptfe foil: 15 10 - 4 tan d for pc foil: 80 10 - 4 r ins : 3 10000 m w rotor contact r: 10 m w 26.2 d damp heat accelerated, first cycle 1 cycle; 24 hours; +40 c; 95 to 100% rh voltage proof: 300 v for 1 minute 26.3 aa cold 16 hours; - 40 c visual examination: no mechanical damage 26.5 damp heat accelerated, remaining cycles 1 cycle; 24 hours; +40 c; 95 to 100% rh operating torque: 1 to 20 mnm for c max < 20 pf; 1 to 30 mnm for c max 3 20 pf
1998 mar 27 13 philips components preliminary speci?cation film dielectric trimmers 2222 808 ..... ? 5 mm 27 ca damp heat steady state 21 days; +40 c; 90 to 95% rh d c/c: 3% tan d for pp and ptfe foil: 15 10 - 4 ; tan d for pc foil: 80 10 - 4 r ins : 3 10000 m w ; rotor contact r: 10 m w voltage proof: 300 v for 1 minute visual examination: no mechanical damage operating torque: 1 to 20 mnm for c max < 20 pf; 1 to 30 mnm for c max 3 20 pf 29 mechanical endurance 10 cycles d c/c: 3% d c/c after axial thrust: 0.3%; rotor contact r: 10 m w voltage proof: 300 v for 1 minute visual examination: no mechanical damage operating torque: 0.5 to 22.5 mnm for c max < 20 pf; 0.5 to 30 mnm for c max 3 20 pf iec 60418-1 clause iec 60068 test method test procedure requirements
1998 mar 27 14 philips components preliminary speci?cation film dielectric trimmers 2222 808 ..... ? 7.5 mm features housing diameter 7.5 mm for a basic grid of 2.54 mm (0.1") or 2.50 mm top and bottom or top adjustment vertical and horizontal versions round or hexagonal head. applications for consumer and industrial equipment. description the vanes of the trimmer are stacked on a sturdy plastic base. the colour of the base indicates the maximum capacitance (see table 2). the dielectric is a film of polypropylene (pp), polyethylene (pe), polycarbonate (pc), polytetrafluorethylene (ptfe), or polyethyleneterephtalate (pet) which supports the vanes in such a way that good stability is ensured and no microphony can occur. flux absorption between the vanes is prevented. cleaning with solvents is not advised. versions are available with either a vertical spindle (see fig.1), or a horizontal spindle (see fig.2). both versions have top adjustment by means of a screwdriver or trimming key and bottom adjustment by means of a key as shown in fig.5. for outline drawings and dimensions see figs 1 and 2. quick reference data description value c min /c max 1.4/5.5 to 3/50 pf rated voltage (dc) 250 v test voltage (dc) for 1 minute 500 v maximum contact resistance 10 m w minimum insulation resistance 10000 m w category temperature range: pp - 40 to +70 c pe, pc, ptfe, pet - 40 to +85 c climatic category (iec 60068): pp 40/070/21 pe, pc, ptfe, pet 40/085/21 minimum storage temperature - 55 c related speci?cation iec 60418-1 and 4 quality level sampling and data evaluation for quality level in accordance with mil-std-105d and iec 60410 : <0.15% major defects <0.65% minor defects. each capacitor is tested for minimum c max and is also subjected to the full test voltage. mechanical data description value effective angle of rotation 180 operating torque: c max < 33 pf 1 to 15 mnm c max 3 33 pf 1 to 25 mnm maximum axial thrust 2 n
1998 mar 27 15 philips components preliminary speci?cation film dielectric trimmers 2222 808 ..... ? 7.5 mm fig.1 trimmers 2222 808 ..... series, vertical version. h andbook, full pagewidth 1.15 max. stator rotor (2 ) 3 0.2 2.5 0.1 30 5 10 (1) max. ? 2.5 z 0.6 0.6 0.7 0.5 round head hexagonal head 4.5 0.2 7.6 0.1 8 max. 2.2 4 0.5 0.6 0.1 0.5 0.15 0.95 0.2 ? 1.6 detail z turned 90 ccb134 dimensions in mm. for hole pattern see fig.3. (1) 11 max. for c max = 40 pf and 50 pf.
1998 mar 27 16 philips components preliminary speci?cation film dielectric trimmers 2222 808 ..... ? 7.5 mm fig.2 trimmers 2222 808 ..... series, horizontal version. dimensions in mm. for hole pattern see fig.4. (1) 11 max. for c max = 40 pf and 50 pf. handbook, full pagewidth 5 0 - 0.1 1.15 max. stator rotor (2 ) 10 (1) max. ? 2.5 z 0.6 0.7 4.5 0.2 7.6 0.1 8.6 max. 4 0.5 8.6 0.2 110 5 0.6 0.1 0.5 0.15 0.95 0.2 ? 1.6 detail z turned 90 ccb135
1998 mar 27 17 philips components preliminary speci?cation film dielectric trimmers 2222 808 ..... ? 7.5 mm fig.3 hole pattern; see fig.1. handbook, halfpage r sr 1.3 5.08 5.08 ccb136 dimensions in mm. r = rotor, s = stator. the large hole is for bottom adjustment and the diameter is determined by users requirements. fig.4 hole pattern; see fig.2. handbook, halfpage 1.3 2.5 7.5 rr s ccb137 dimensions in mm. r = rotor, s = stator. adjustment for top adjustment a screwdriver or trimming key can be used; for bottom adjustment a key is required as shown in fig.5. fig.5 bottom adjustment key. handbook, halfpage ? 3 2 min. 0.7 + 0.1 0 0.6 + 0.2 0 ? 1.7 + 0.1 0 ccb138 dimensions in mm.
1998 mar 27 18 philips components preliminary speci?cation film dielectric trimmers 2222 808 ..... ? 7.5 mm ordering information table 1 selection chart c min /c max (pf) catalogue number 2222 808 ..... vertical version horizontal version round head hexagonal head round head top and bottom adjustment top adjustment only top and bottom adjustment top and bottom adjustment 1.4/5.5 11558 00004 - 51558 2/9 00018 --- 2/10 11109 00005 17109 51109 2/10 - 11004 -- 2/15 11159 --- 2/18 00016 --- 2.5/20 - 11006 -- 2.5/22 11229 00006 17229 51229 2.5/27 11279 -- 51279 3/33 11339 --- 3/40 11409 - 17409 51409 3/50 11509 - 17509 51509 mounting the trimmer can be mounted on printed-circuit boards with a grid of 2.50 mm or 2.54 mm and a minimum hole diameter of 1.25 mm. for hole patterns see figs 3 and 4. packaging bulk packaged in cardboard boxes lined with expanded plastic. for smallest packaging quantity (spq) see table 2.
1998 mar 27 19 philips components preliminary speci?cation film dielectric trimmers 2222 808 ..... ? 7.5 mm electrical data table 2 electrical characteristics, smallest packaging quantities and catalogue numbers guaranteed max. c min / min. c max at 200 khz (pf) spindle shape of head fig. adj. mode diel. tan d at c max 10 - 4 temp. coeff. (10 - 6 /k) min. f res at c max (mhz) col. of base spq catalogue number 1 mhz 100 mhz 1.4/5.5 vertical round 1 top + bottom pe 10 25 - 250 350 850 grey 1400 2222 808 11558 1 top 1400 2222 808 00004 horizontal round 2 top + bottom 1200 2222 808 51558 2/9 vertical round 1 top + bottom ptfe 10 15 - 150 800 400 yellow 1400 2222 808 00018 2/10 vertical round 1 top + bottom pp 10 25 - 250 800 480 yellow 1400 2222 808 11109 1 top 1400 2222 808 00005 hexag. 1 top 1400 2222 808 17109 horizontal round 2 top + bottom 1200 2222 808 51109 vertical round 1 top pc 70 100 - 150 800 250 yellow 1000 2222 808 11004 2/15 vertical round 1 top + bottom pp 10 25 - 250 600 450 blue 1400 2222 808 11159 2/18 vertical round 1 top + bottom ptfe 10 15 - 250 350 350 green 1400 2222 808 00016 2.5/20 vertical round 1 top pet 160 - 0 1100 250 green 1000 2222 808 11006 2.5/22 vertical round 1 top + bottom pp 10 25 - 200 500 350 green 1400 2222 808 11229 1 top 1400 2222 808 00006 vertical hexag. 1 top 1400 2222 808 17229 horizontal round 2 top + bottom 1200 2222 808 51229 2.5/27 vertical round 1 top + bottom pc 70 -- 50 500 350 red 1400 2222 808 11279 horizontal round 2 top + bottom 1200 2222 808 51279 3/33 vertical round 1 top + bottom pp 10 -- 250 350 300 brown 1400 2222 808 11339 3/40 vertical round 1 top + bottom pc 70 -- 50 400 300 violet 1400 2222 808 11409 vertical hexag. 1 top 1400 2222 808 17409 horizontal round 2 top + bottom 1200 2222 808 51409 3/50 vertical round 1 top + bottom pc 70 -- 50 500 250 black 1400 2222 808 11509 vertical hexag. 1 top 1400 2222 808 17509 horizontal round 2 top + bottom 1200 2222 808 51509
1998 mar 27 20 philips components preliminary speci?cation film dielectric trimmers 2222 808 ..... ? 7.5 mm tests and requirements table 3 test procedures and requirements iec 60418-1 clause iec 60068 test method test procedure requirements 4.2 method of mounting method a 14 capacitance drift after tc measurement d c/c: 1% for c max < 40 pf; d c/c: 2.5% for c max 3 40 pf 19 thrust axial thrust of 2 n d c/c: 0.3% 21 robustness of terminations: 21.1 ua tensile 1 n no damage 21.2 ub bending 1 cycle no damage 22 na rapid change of temperature 1 cycle; 0.5 hours at lower and 0.5 hours at upper category temperature d c/c: 2% 23 t soldering: ta solderability solder bath immersion 3 mm; 235 c; 2 s good wetting no mechanical damage tb resistance to heat solder bath: 260 c; 10 s no mechanical damage 24 eb impact bump 4000 10 bumps; 40 g; 6 ms d c/c: 0.6%; no mechanical damage 25 fc vibration frequency 10 to 55 hz; amplitude 0.35 mm; 1.5 hours d c/c: 0.6%; no mechanical damage 26 climatic sequence: d c/c: 4 26.1 b dry heat 16 hours at upper category temperature tan d: 10 10 - 4 for c max < 27 pf; tan d: 70 10 - 4 for c max 3 27 pf; tan d: 80 10 - 4 for c max 3 40 pf r ins : 3 10000 m w ; rotor contact r: 10 m w 26.2 d damp heat accelerated, first cycle 1 cycle; 24 hours; +40 c; 95 to 100% rh voltage proof: 500 v for 1 minute 26.3 aa cold 16 hours; - 40 c visual examination: no mechanical damage 26.5 damp heat accelerated, remaining cycles 1 cycle; 24 hours; +40 c; 95 to 100% rh operating torque: 1 to 15 mnm for c max < 33 pf; 1 to 25 mnm for c max 3 33 pf
1998 mar 27 21 philips components preliminary speci?cation film dielectric trimmers 2222 808 ..... ? 7.5 mm 27 ca damp heat steady state 21 days; +40 c; 90 to 95% rh d c/c: 5% tan d: 30 10 - 4 for c max < 27 pf; tan d: 70 10 - 4 for c max 3 27 pf; tan d: 80 10 - 4 for c max 3 40 pf r ins : 3 10000 m w ; rotor contact r: 10 m w voltage proof: 500 v for 1 minute visual examination: no mechanical damage operating torque: 1 to 15 mnm for c max < 33 pf; 1 to 25 mnm for c max 3 33 pf 29 mechanical endurance 10 cycles d c/c: 1.5% d c/c after axial thrust: 0.3%; rotor contact r: 10 m w voltage proof: 500 v for 1 minute visual examination: no mechanical damage operating torque: 1 to 15 mnm for c max < 33 pf; 1 to 25 mnm for c max 3 33 pf iec 60418-1 clause iec 60068 test method test procedure requirements
1998 mar 27 22 philips components preliminary speci?cation film dielectric trimmers 2222 808 ..... ? 10 mm features housing diameter 10 mm for a basic grid of 2.54 mm (0.1") or 2.50 mm top and bottom or top adjustment vertical and horizontal versions round or hexagonal head. applications for consumer and industrial equipment. description the vanes of the trimmer are stacked on a sturdy plastic base. the colour of the base indicates the maximum capacitance (see table 2). the dielectric is a film of polypropylene (pp), polycarbonate (pc) or polytetrafluorethylene (ptfe), which supports the vanes in such a way that good stability is ensured and no microphony can occur. flux absorption between the vanes is prevented. cleaning with solvents is not advised. versions are available with either a vertical spindle (see figs 1 and 2), or a horizontal spindle (see fig.3). both versions have top adjustment by means of a screwdriver or trimming key and bottom adjustment by means of a key as shown in fig.7. for outline drawings and dimensions see figs 1, 2 and 3. quick reference data description value c min /c max 2.5/15 to 7/105 pf rated voltage (dc) 150 v test voltage (dc) for 1 minute 300 v maximum contact resistance 10 m w minimum insulation resistance 10000 m w category temperature range: pp - 40 to +70 c pc, ptfe - 40 to +85 c climatic category (iec 60068): pp 40/070/21 pc, ptfe 40/085/21 minimum storage temperature - 55 c related speci?cation iec 60418-1 and 4 quality level sampling and data evaluation for quality level in accordance with mil-std-105d and iec 60410 : <0.15% major defects <0.65% minor defects. each capacitor is tested for minimum c max and is also subjected to the full test voltage. mechanical data description value effective angle of rotation 180 operating torque 2 to 25 mnm maximum axial thrust 2 n
1998 mar 27 23 philips components preliminary speci?cation film dielectric trimmers 2222 808 ..... ? 10 mm fig.1 trimmers 2222 808 ..... series, vertical version. handbook, full pagewidth 5 0.1 5.85 0.2 3 0.2 0.6 0.1 4 0.5 0.65 0.2 0.5 0.15 10.6 max. 11 max. 1.15 max. 15.3 0 - 1 ? 2.5 ? 1.6 ? 2 10 0 - 0.2 2.5 0.4 max. z stator rotor (2 ) 0.6 0.7 1 5.8 detail z turned 90 round head extended hexagonal head ccb140 dimensions in mm. hole pattern 5 mm 10 mm; see fig.4.
1998 mar 27 24 philips components preliminary speci?cation film dielectric trimmers 2222 808 ..... ? 10 mm fig.2 trimmers 2222 808 ..... series, vertical version. handbook, full pagewidth 5 0.1 5.85 0.2 3 0.2 0.6 0.1 4 0.5 0.85 max. 0.5 0.15 10.6 max. 11 max. 1.15 max. 15.3 0 - 1 ? 2.5 ? 1.6 ? 2 10 0 - 0.2 2.5 z stator rotor (2 ) 0.6 0.7 1 5.8 detail z turned 90 round head extended hexagonal head ccb141 dimensions in mm. hole pattern 7.5 mm 5 mm; see fig.5.
1998 mar 27 25 philips components preliminary speci?cation film dielectric trimmers 2222 808 ..... ? 10 mm handbook, full pagewidth 5 0.1 3 0.2 4 0.5 4.8 0.2 3.1 0.3 110 5 6.5 0.1 11 max. 11 max. 1.15 max. 15.3 0 - 1 ? 2.5 ? 2 10 0 - 0.2 2.5 z stator rotor (2 ) 0.6 0.7 1 5.8 round head extended hexagonal head 0.6 0.1 0.85 max. 0.5 0.15 ? 1.6 detail z turned 90 ccb142 fig.3 trimmers 2222 808 ..... series, horizontal version. dimensions in mm. hole pattern 5 mm 10 mm; see fig.6.
1998 mar 27 26 philips components preliminary speci?cation film dielectric trimmers 2222 808 ..... ? 10 mm fig.4 hole pattern; see fig.1. dimensions in mm. r = rotor, s = stator. the large hole is for bottom adjustment and the diameter is determined by users requirements. handbook, halfpage 10 5 1.3 rr s 5 ccb143 fig.5 hole pattern; see fig.2. dimensions in mm. r = rotor, s = stator. handbook, halfpage 5 1.3 rr s 7.5 2.5 ccb144 fig.6 hole pattern; see fig.3. dimensions in mm. r = rotor, s = stator. handbook, halfpage 10 5 1.3 rr s 5 ccb145 adjustment for top adjustment a screwdriver or trimming key can be used; for bottom adjustment a key is required as shown in fig.7. fig.7 bottom adjustment key. handbook, halfpage ? 3 2 min. 0.7 + 0.1 0 0.6 + 0.2 0 ? 1.7 + 0.1 0 ccb138 dimensions in mm.
1998 mar 27 27 philips components preliminary speci?cation film dielectric trimmers 2222 808 ..... ? 10 mm ordering information table 1 selection chart c min /c max (pf) catalogue number 2222 808 ..... horizontal version vertical version hole pattern 5mm 10 mm hole pattern 5mm 10 mm hole pattern 7.5 mm 5mm round head hex head round head hex. head round head hex. head round head top and bottom adjustment top and bottom adjustment top adjustment 2.5/15 61159 - 31159 - 32159 -- 3/22.5 61229 - 31229 - 32229 -- 5.5/40 61409 - 31409 - 32409 -- 5.5/50 -- 01029 - 01006 -- 5.5/65 61659 64659 31659 34659 32659 - 01001 6/80 61809 64809 31809 34809 32809 35809 - 7/105 61101 64101 31101 - 32101 -- 6/120 -- 31121 --- - mounting the trimmer can be mounted on printed-circuit boards with a grid of 2.50 mm or 2.54 mm and a minimum hole diameter of 1.25 mm. for hole patterns see figs 4, 5 and 6. packaging bulk packaged in cardboard boxes lined with expanded plastic. for smallest packaging quantities (spq) see table 2.
1998 mar 27 28 philips components preliminary speci?cation film dielectric trimmers 2222 808 ..... ? 10 mm electrical data table 2 electrical characteristics and catalogue numbers guaranteed max. c min / min. c max at 200 khz (pf) spindle shape of head fig. adj. mode diel. tan d at c max 10 - 4 temp. coeff. (10 - 6 /k) min. f res at c max (mhz) col. of base spq catalogue number 1 mhz 100 mhz 2.5/15 vertical round 1 top + bottom pp 10 25 - 200 700 420 blue 800 2222 808 31159 2 800 2222 808 32159 horizontal 3 700 2222 808 61159 3/22.5 vertical round 1 top + bottom pp 10 25 - 200 700 200 green 800 2222 808 31229 2 800 2222 808 32229 horizontal 3 700 2222 808 61229 5.5/40 vertical round 1 top + bottom pp 10 25 - 200 400 200 grey 800 2222 808 31409 2 800 2222 808 32409 horizontal 3 700 2222 808 61409 5.5/50 vertical round 1 top + bottom ptfe 10 25 - 200 400 170 yellow 800 2222 808 01029 2 800 2222 808 01006 5.5/65 vertical round 2 top pp 10 25 - 200 500 170 yellow 800 2222 808 01001 round 1 top + bottom 800 2222 808 31659 round 2 800 2222 808 32659 hexag. 1 700 2222 808 34659 horizontal round 3 700 2222 808 61659 hexag. 3 600 2222 808 64659 6/80 vertical round 1 top + bottom pc 70 -- 50 400 170 red 800 2222 808 31809 hexag. 1 700 2222 808 34809 round 2 800 2222 808 32809 hexag. 2 700 2222 808 35809 horizontal round 3 700 2222 808 61809 hexag. 3 600 2222 808 64809 7/105 vertical round 1 top + bottom pc 70 -- 50 400 170 violet 800 2222 808 31101 round 2 800 2222 808 32101 horizontal round 3 700 2222 808 61101 hexag. 3 600 2222 808 64101 6/120 vertical round 2 top + bottom pc 70 -- 50 400 170 violet 800 2222 808 31121
1998 mar 27 29 philips components preliminary speci?cation film dielectric trimmers 2222 808 ..... ? 10 mm tests and requirements table 3 test procedures and requirements iec 60418-1 clause iec 60068 test method test procedure requirements 4.2 method of mounting method a 14 capacitance drift after tc measurement d c/c: 4.5% for c max < 40 pf; d c/c: 2.5% for c max 3 40 pf 19 thrust axial thrust of 2 n d c/c: 0.3% 21 robustness of terminations: 21.1 ua tensile 1 n no damage 21.2 ub bending 1 cycle no damage 22 na rapid change of temperature 1 cycle; 0.5 hours at lower and 0.5 hours at upper category temperature d c/c: 1.5% 23 t soldering: ta solderability solder bath immersion 3 mm; 235 c; 2 s good wetting no mechanical damage tb resistance to heat solder bath: 260 c; 10 s no mechanical damage 24 eb impact bump 4000 10 bumps; 40 g; 6 ms d c/c: 0.4%; no mechanical damage 25 fc vibration frequency 10 to 55 hz; amplitude 0.35 mm; 1.5 hours d c/c: 0.8%; no mechanical damage 26 climatic sequence: d c/c: 3% for c max < 80 pf; d c/c: 6% for c max 3 80 pf 26.1 b dry heat 16 hours at upper category temperature tan d: 15 10 - 4 for c max < 80 pf; tan d: 80 10 - 4 for c max 3 80 pf r ins : 3 10000 m w ; rotor contact r: 10 m w 26.2 d damp heat accelerated, first cycle 1 cycle; 24 hours; +40 c; 95 to 100% rh voltage proof: 300 v for 1 minute 26.3 aa cold 16 hours; - 40 c visual examination: no mechanical damage 26.5 damp heat accelerated, remaining cycles 1 cycle; 24 hours; +40 c; 95 to 100% rh operating torque: 2 to 35 mnm
1998 mar 27 30 philips components preliminary speci?cation film dielectric trimmers 2222 808 ..... ? 10 mm 27 ca damp heat steady state 21 days; +40 c; 90 to 95% rh d c/c: 3% for c max < 100 pf; 3.5% for c max 3 100 pf tan d : 20 10 - 4 for c max < 80 pf; tan d : 80 10 - 4 for c max 3 80 pf r ins : 3 10000 m w ; rotor contact r: 10 m w voltage proof: 300 v for 1 minute visual examination: no mechanical damage operating torque: 2 to 35 mnm 29 mechanical endurance 10 cycles d c/c: 1% d c/c after axial thrust: 0.4%; rotor contact r: 10 m w voltage proof: 300 v for 1 minute visual examination: no mechanical damage operating torque: 1.5 to 37 mnm iec 60418-1 clause iec 60068 test method test procedure requirements

▲Up To Search▲

Price & Availability of 222268E11

	To Download 222268E11 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .