View HSD070I651-F00_2015529.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

document title HSD070I651-F00 cas for zenitron page no. 1 / 23 document no. revision 1.0 the information contained in this document is the exclus ive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. to zenitron date 2008/02/22 customer acceptance specification model : hsd070i651 -f00 accepted by: signature date proposed by: technical service division signature date note:1. please contact hannstar display corp. before designing your product based on this module specification. 2.the information contained herein is presented merely to indicate the characteristics and performance of our products. no responsibility is as sumed by hannstar for any intellectual property claims or other problems that may result from application based on the module described herein. www.datasheet.in
document title HSD070I651-F00 cas for zenitron page no. 2 / 23 document no. revision 1.0 the information contained in this document is the exclus ive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. record of revisions rev. date sub-model description of change 1.0 feb,22, 2008 f00 preliminary product specification was first issued. www.datasheet.in
document title HSD070I651-F00 cas for zenitron page no. 3 / 23 document no. revision 1.0 the information contained in this document is the exclus ive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. contents 1.0 general description ????????????.? p.4 2.0 absolute maximum ratings ??????????. p.5 3.0 optical characteristics ????????????. p.6 4.0 block diagram ???????????.. ???.. p.10 5.0 interface pin connection ???????????. p.11 6.0 electrical characteristics ???????????. p.12 7.0 reliability test items?????????????? p.18 8.0 outline dimension ???????????.?? p.19 9.0 lot mark ?????????????????... p.20 10.0 package specification ????????????. p.21 11.0 general precaution ??????????????. p.22 www.datasheet.in
document title HSD070I651-F00 cas for zenitron page no. 4 / 23 document no. revision 1.0 the information contained in this document is the exclus ive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. 1.0 general description 1.1 introduction hannstar display model hsd070i651-f is a color active matrix thin film transistor (tft) liquid crystal display (lcd) that uses amorphous silicon tft as a switching device. this model is composed of a tft lcd panel, a driving circuit and a back light system. this tft lcd has a 7.0 (16:9) inch diagonally measured active display area with 1440 x 234 dot (480 horizontal by 234 vertical pixel) resolution. 1.2 features 7 (16:9 diagonal) inch configuration compatible with ntsc & pal system image reversion: up/down and left/right rohs compliance 1.3 applications digital photo frame portable dvd multimedia applications and others av system 1.4 general information item specification unit outline dimension 164.9 x 100 x 5.5 (typ.) mm display area 154.08(h) x 86.58(v) mm number of pixel 480 rgb(h) x234(v) pixels pixel pitch 0.321(h) x 0.370(v) mm pixel arrangement rgb vertical stripe display mode normally white surface treatment antiglare, hard-coating(3h) with ewv film weight 160 (typ.) g back-light single led (side-light type) power consumption b/l system 1.2(max.) w 1.5 mechanical information item min. typ. max. unit horizontal(h) 164.4 164.9 165.4 mm vertical(v) 99.5 100.0 100.5 mm module size depth(d) 5.7 6.0 mm weight (without inverter) 160 g www.datasheet.in
document title HSD070I651-F00 cas for zenitron page no. 5 / 23 document no. revision 1.0 the information contained in this document is the exclus ive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. 2.0 absolute maximum ratings 2.1 electrical absolute rating 2.1.1 tft lcd module item symbol min. max. unit note dv dd -0.3 6.0 v gnd=0 v gh -0.3 15 v gnd=0 v gl -10 0.3 v gnd=0 v gh - v gl -10 15 v av dd -0.3 7.0 v agnd=0 power supply voltage v com -1.6 5.2 v analog signal input level v r, v g, v b -0.2 av dd +0.2 v logic signal input level v i -0.3 dv dd +0.3 v 2.1.2 back-light unit item symbol typ. max. unit note led current i l -- 100 ma (1) (2) led voltage v l 10.5 12 v (1) (2)(3) note (1) permanent damage may occur to the lcd module if beyond this specification. functional operation should be restricted to the conditions described under normal operating conditions. (2) ta =252 (3) test condition: led current 100 ma 2.2 environment absolute rating item symbol min. max. unit note operating temperature t opa -20 70 storage temperature t stg -30 80 www.datasheet.in
document title HSD070I651-F00 cas for zenitron page no. 6 / 23 document no. revision 1.0 the information contained in this document is the exclus ive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. 3.0 optical characteristics 3.1 optical specification item symbol condition min. typ. max. unit note contrast cr 400 500 (1)(2) rising t r 5 7 response time falling t f 20 28 msec (1)(3) white luminance (center) y l 160 200 cd/m 2 (1)(4) (i l =100ma) w x 0.260 0.310 0.360 color chromaticity (cie1931) white w y =0 normal viewing angle 0.280 0.330 0.380 l 60 70 hor. r 60 70 u 50 60 viewing angle ver. d cr>10 60 70 (1)(4) brightness uniformity b uni =0 70 % (5) optima view direction 6 o clock (6) 3.2 measuring condition measuring surrounding : dark room led current i l : 100ma ambient temperature : 252 o c 30min. warm-up time. 3.3 measuring equipment fpm520 of westar display technologies, inc., which utilized sr-3 for chromaticity and bm-5a for other optical characteristics. measuring spot size : 20 ~ 21 mm www.datasheet.in
document title HSD070I651-F00 cas for zenitron page no. 7 / 23 document no. revision 1.0 the information contained in this document is the exclus ive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. note (1) definition of viewing angle : note (2) definition of contrast ratio(cr) : measured at the center point of panel luminance with all pixels white cr = luminance with all pixels black note (3) definition of response time : sum of t r and t f l r u d =0 o =180 o 12? o?clock =90 o 6? o?clock =270 o www.datasheet.in
document title HSD070I651-F00 cas for zenitron page no. 8 / 23 document no. revision 1.0 the information contained in this document is the exclus ive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. note (4) definition of optical measurement setup time optical response white(tft off) black (tft on) white(tft off) 100% 90% 10% 0% t r t f www.datasheet.in
document title HSD070I651-F00 cas for zenitron page no. 9 / 23 document no. revision 1.0 the information contained in this document is the exclus ive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. note (5) definition of brightness uniformity luminance uniformity = 100% note (6) rubbing direction (the different rubbing direction will cause the different optima view direction. (min luminance of 9 points) (max luminance of 9 points) 25% 50% 75% 25% 50% 75% y 1 y 2 y 3 y 4 y 5 y 6 y 7 y 8 y 9 www.datasheet.in
document title HSD070I651-F00 cas for zenitron page no. 10 / 23 document no. revision 1.0 the information contained in this document is the exclus ive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. 4.0 block diagram 4.1 tft lcd module 4.2 pixel format 1,1 1,480 234, 480 lcd display area 2,1 1,2 1,3 1,4 234 lines 480 pixel (1440 dots) 234,1 r r r b g 1 pixel scan driver source driver lcd panel input fpc led cn1 cn2 www.datasheet.in
document title HSD070I651-F00 cas for zenitron page no. 11 / 23 document no. revision 1.0 the information contained in this document is the exclus ive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. 5.0 interface pin connection 5.1 tft lcd module cn2 (input signal): fpc down connector, 26 pins, pitch: 0.5mm terminal no. symbol i/o function note 1 dgnd - ground for logic circuit 2 dv dd i supply voltage of logic control circuit for scan (gate) driver 3 v gl i negative power for scan (gate) driver 4 v gh i positive power for scan (gate) driver 5 stvd i/o vertical start pulse (1) 6 stvu i/o vertical start pulse (1) 7 ckv i shift clock input for scan (gate) driver 8 u/d i up/down scan control input (1) 9 oev i output enable input for scan(gate) driver 10 v com i common electrode driving signal 11 v com i common electrode driving signal 12 l/r i left/right scan control input (1) 13 mod i sequential sampling and simultaneous sampling setting (2) 14 oeh i output enable input for data (source) driver 15 sthl i/o start pulse for horizontal scan (gate) line (1) 16 sthr i/o start pulse for horizontal scan (gate) line (1) 17 cph3 i sampling and shifting clock pulse for data (source) driver (2) 18 cph2 i sampling and shifting clock pulse for data (source) driver (2) 19 cph1 i sampling and shifting clock pulse for data (source) driver 20 dv dd i supply voltage of logic control circuit for data(source) driver 21 dgnd - ground for logic circuit 22 v r i alternated video signal input(red) 23 v g i alternated video signal input(green) 24 v b i alternated video signal input(blue) 25 av dd i supply voltage for analog circuit 26 agnd - ground for analog circuit note (1) selection of scanning mode (please refer to the following table) setting of scan control input in/out state for start pulse scanning direction u/d l/r stvd stvu sthr sthl gnd dv dd output input output input up to down, and from left to right. dv dd gnd input output input output down to up, and from right to left. gnd gnd output input input output up to down, and from right to left. dv dd dv dd input output output input down to up, and from left to right. note (2) mod=h: simultaneous sampling.(please check cph2 and cph3 to gnd when mod=h) mod=l : sequential sampling. www.datasheet.in
document title HSD070I651-F00 cas for zenitron page no. 12 / 23 document no. revision 1.0 the information contained in this document is the exclus ive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. 5.2 back-light unit cn1 led power source ( bhsr-02vs-1 ) / japan solderless terminal mfg co., ltd. mating connector: ( sbht-002t-p0.5 ) / japan solderless terminal mfg co., ltd. terminal no. symbol function 1 vl led power supply (high voltage) 2 gl led power supply (low voltage) 6.0 electrical characteristics 6.1 tft lcd module item symbol min. typ. max. unit note dv dd 3 3.3 5.5 v v gh 14.3 15 15.7 v v gl -10.5 -10 -9.5 v supply voltage av dd 4.5 5 5.5 v v ia 0.4 - av dd -0.4 v vi ac - 3 - v ac component, video signal amplitude (vr,vg,vb) v idc - av dd /2 - v dc component v cac 5.5 vp-p ac component vcom v cdc 1.6 1.8 2.0 v dc component, (1) v ih 0.8dv dd - dv dd v (2) input signal voltage v il 0 - 0.2 dv dd v (2) i dd - 4.2 - ma dv dd =3.3v i add - 3.7 - ma av dd =5v(black) i gh - 60 - ua v gh =15v current of power supply i gl - 400 - ua v gl =-10v note (1): the brightness of lcd panel coul d be changed by adjusting the ac component of v com . note (2): sthl, sthr, oeh, l/r, cph1~cph3, stvd, stvu, oev, ckv, u/d note (3): b e sure to apply the power voltage as the power sequence spec. note (4) : d gnd=agnd=0v,) www.datasheet.in
document title HSD070I651-F00 cas for zenitron page no. 13 / 23 document no. revision 1.0 the information contained in this document is the exclus ive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. 6.2 back-light unit the back-light system is an edge-lighting type with 15 led. the characteristics of the led is shown in the following tables. item symbol min. typ. max. unit note led current il 100 ma led voltage vl 10.5 12 v operating led life time hr 20,000 hour (1) note (1) led life time (hr) can be defined as the time in which it continues to operate under the condition : ta=253 o c, typical il value indicated in the above table until the brightness becomes less than 50%. lcd module white(ground) blac k a power supply 1 2 www.datasheet.in
document title HSD070I651-F00 cas for zenitron page no. 14 / 23 document no. revision 1.0 the information contained in this document is the exclus ive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. 6.3 ac characteristics item symb o l min. typ. max. unit note rising time t r - - 10 ns (1) falling time t f - - 10 ns (1) high and low level pulse duty t cph 100 103 - ns cph1~cph3 cph pulse duty t cwh 40 50 60 cph1~cph3 sth setup time t suh 20 - - ns sthr,sthl sth hold time t hdh 10 - - ns sthr,sthl sth pulse width t sth - 1 - t cph sthr,sthl sth period t h 61.5 63.5 65.5 s sthr,sthl oeh pulse width t oeh - 1.23 - s oeh sample and hold disable time t dis1 - 8.19 - s oev pulse width t oev - 4.77 - s oev ckv pulse width t ckv - 3.91 - s ckv clean enable time t dis2 - 3.90 - s horizontal display timing range t dh - 1440 - t cph /3 stv setup time t suv 200 - - ns stvd,stvu stv hold time t hdv 300 - - ns stvd,stvu stv pulse width t stv - 1 - t h stvd,stvu horizontal line per field t v 256 262 268 t h (2) vertical display start t sv 3 - t h vertical display timing range t dv 234 - t h vcom rising time t rcom - 5 s vcom falling time t fcom - 5 s vcom delay time t dcom - 3 s rgb delay time t drgb * 1 s note (1): for all of the logic signals. note (2): please don?t use odd horizontal lines to drive lcd panel for both odd and even filed simultaneously. www.datasheet.in
document title HSD070I651-F00 cas for zenitron page no. 15 / 23 document no. revision 1.0 the information contained in this document is the exclus ive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. 6.4 timing diagram of interface signal cph1 oeh vr,vb,vg sthl(r) tr tf t cph t cwh t suh t hdh t suh t sth t hdh t oeh t dis1 sampling clock timing t dh sthl(r) (input) cph1 sthr(l) (output) t h oeh sthl(r) 1 h h sync horizontal display timing range www.datasheet.in
document title HSD070I651-F00 cas for zenitron page no. 16 / 23 document no. revision 1.0 the information contained in this document is the exclus ive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. ckv stvd(u ) t stv t suv t hdv t ckv vertical shift timing 90% oev ckv vcom vr,vg,vb t oev t dis2 t ckv t dcm t f com t r com 10% t drgb v cac v iac v idc v ia blank white white black white black detail horizontal timing vr,vg,vb vcom (odd) vcom (even) stvd(u) v sync h sync t sv vertical timing the first line www.datasheet.in
document title HSD070I651-F00 cas for zenitron page no. 17 / 23 document no. revision 1.0 the information contained in this document is the exclus ive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. 6.5 power sequence power sequence: dv dd -> vgl -> vgh note apply the led volatge within the lcd operation range. when the back-light turns on before the lcd operation or the lcd truns off before the back-light turns off. the display may momentarily become white. t 10% 90% level define dv dd vgh vgh gnd dv dd vgl vgl gnd power on power off off off video, logic signal www.datasheet.in
document title HSD070I651-F00 cas for zenitron page no. 18 / 23 document no. revision 1.0 the information contained in this document is the exclus ive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. 7.0 reliability test items no. item conditions remark 1 high temperature storage ta=+80 o c, 240hrs 2 low temperature storage ta=-30 o c, 240hrs 3 high temperature operation ta=+70 o c, 240hrs 4 low temperature operation ta=-20 o c, 240hrs 5 high temperature and high humidity (operation) ta = + 6 0 o c, 90%rh, 240hrs 6 thermal cycling test (non operation) -30 o c(30min) +80 o c(30min), 200cycles 7 electrostatic discharge 200v,200pf(0 ? ) 1 time/each terminal 8 vibration 1.random: 1.04grms, 10~500hz, x/y/z, 30min/each direction 2.sweep sine: 1.5g, 5~500hz, x/y/z, 30min/each direction 9 shock 100g,6ms, x, y, z 3 time for each direction jis c7021, a-10 (condition a) 10 vibration (with carton) random: 1.04grms, 10~500hz, x/y/z 45min/each direction fixed: 5hz, 1.5grms, x/y/z 45min/each direction 11 drop (with carton) height: 60cm 1 corner, 3 edges, 6 surfaces jis z0202 note: there are no display function ng issue occurred, all the cosmetic specification is judged before the reliability stress. www.datasheet.in
document title HSD070I651-F00 cas for zenitron page no. 19 / 23 document no. revision 1.0 the information contained in this document is the exclus ive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. 8.0 outline dimension 8.1 outline dimension fpc length: 41.29 mm note : general tolerance : +/- 0.3mm unit : mm www.datasheet.in
document title HSD070I651-F00 cas for zenitron page no. 20 / 23 document no. revision 1.0 the information contained in this document is the exclus ive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. 9.0 lot mark 9.1 lot mark 10 11 12 13 14 15 code 1,2,3,4,5,6: hannstar internal flow control code. code 7: production location. code 8: production year. code 9: production month. code 10,11,12,13,14,15: serial number. note (1) production year year 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 mark 9 0 1 2 3 4 5 6 7 8 note (2) production month month jan. feb. mar. apr. may. jun. jul. aug. sep. oct nov. dec. mark 1 2 3 4 5 6 7 8 9 a b c 9.2 location of lot mark (1) the label is attached to the backside of the lcd module. (2) this is subject to change without prior notice. hsd070i651- f** www.datasheet.in
document title HSD070I651-F00 cas for zenitron page no. 21 / 23 document no. revision 1.0 the information contained in this document is the exclus ive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. 6 5 4 2 3 1 10.0 package specification 10.1 packing form (1) package quantity in one carton: 60 pieces. (2) carton size: 464 3 mm 360 3 mm 370 3 mm. (3) for domestic transportation only. 10.2 packing assembly drawings www.datasheet.in
document title HSD070I651-F00 cas for zenitron page no. 22 / 23 document no. revision 1.0 the information contained in this document is the exclus ive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. 11.0 general precaution 11.1 use restriction this product is not authorized for use in life supporting systems, aircraft navigation control systems, military systems and any other app lication where performance failure could be life-threatening or otherwise catastrophic. 11.2 disassembling or modification do not disassemble or modify the module. it may damage sensitive parts inside lcd module, and may cause scratches or dust on the display. hannstar does not warrant the module, if customers disassemble or modify the module. 11.3 breakage of lcd panel 11.3.1.if lcd panel is broken and liquid crystal spills out, do not ingest or inhale liquid crystal, and do not contact liquid crystal with skin. 11.3.2. if liquid crystal contacts mouth or eyes, rinse out with water immediately. 11.3.3. if liquid crystal contacts skin or cloths, wash it off immediately with alcohol and rinse thoroughly with water. 11.3.4. handle carefully with chips of glass that may cause injury, when the glass is broken. 11.4 electric shock 11.4.1. disconnect power supply before handling lcd module. 11.4.2. do not pull or fold the led cable. 11.4.3. do not touch the parts inside lcd modules and the fluorescent led?s connector or cables in order to prevent electric shock. 11.5 absolute maximum ratings and power protection circuit 11.5.1. do not exceed the absolute maximum rating values, such as the supply voltage variation, input voltage variation, variation in parts? parameters, environmental temperature, etc., otherwise lcd module may be damaged. 11.5.2. please do not leave lcd module in the environment of high humidity and high temperature for a long time. 11.5.3. it?s recommended to employ protection circuit for power supply. 11.6 operation 11.6.1 do not touch, push or rub the polarizer with anything harder than hb pencil lead. 11.6.2 use fingerstalls of soft gloves in order to keep clean display quality, when persons handle the lcd module for incoming inspection or assembly. 11.6.3 when the surface is dusty, please wipe gently with absorbent cotton or other soft material. www.datasheet.in
document title HSD070I651-F00 cas for zenitron page no. 23 / 23 document no. revision 1.0 the information contained in this document is the exclus ive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. 11.6.4 wipe off saliva or water drops as soon as possible. if saliva or water drops contact with polarizer for a long time, they may causes deformation or color fading. 11.6.5 when cleaning the adhesives, please use absorbent cotton wetted with a little petroleum benzine or other adequate solvent. 11.7 mechanism please mount lcd module by using mouting holes arranged in four corners tightly. 11.8 static electricity 11.8.1 protection film must remove very slowly from the surface of lcd module to prevent from electrostatic occurrence. 11.8.2. because lcd module use cmos-ic on circuit board and tft-lcd panel, it is very weak to electrostatic discharge. please be careful with electrostatic discharge. persons who handle the module should be grounded through adequate methods. 11.9 strong light exposure the module shall not be exposed under strong light such as direct sunlight. otherwise, display characteristics may be changed. 11.10 disposal when disposing lcd module, obey the local environmental regulations. www.datasheet.in

▲Up To Search▲

Price & Availability of HSD070I651-F00

	To Download HSD070I651-F00 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .