features / benefits p utilizes 4 premium flux luxeon ? rebel? leds, 100+ lumens for cool white, 100+ lumens for neutral white and 50+ lumens for warm white p allows for custom heatsink or fixture design p etl recognized to ul standards (pending) p available in choice of colours & colour temperatures p quick connect terminal blocks for easy installation p >70% lumen maintenance @ 50,000 hours at max operating temperature. better at lower operating temps! powerwhite circular led modules pwmr/pwmrd mdexlumpwmr_a dialight corporation 1501 route 34 south ? farmingdale, nj 07727 usa tel: (1) 732-919-3119 ? fax: (1) 732-751-5778 ? www.dialight.com application dialight europe ltd exning road ? newmarket ? suffolk, united kingdom, cb8 0ax tel :+44 (0)1638 666541 ? www.dialight.com ordering information sp = 7 degree spot wd = 13 degree wide all angles are half divergence optic (bb) typical colour (aa) temperature p spot lighting p accent lighting p general illumination p interior use only p architectural lighting p machine vision p display cases pwmr d -c1- aa - bb options blank = no onboard driver d = with onboard driver materials / finish p casing - adc10 aluminium alloy p finish - anodised satin silver p connection - cage clamp connectors p optics - dialight-lumidrives optics p lens cover - polycarbonate 143r p rear cover - polycarbonate 143r diameter x h 35.0mm x 37.5mm (1.38 x 1.48) maximum cable dia - 1.5mm 2 / 16 awg 35 1.38 [] 33,5 1.32 [] 37,44 [1.47] input connector 1.5mm2 max cable mechanical dimensions cw = 5000k C 6350k nw = 3800k C 4100k ww = 2850k C 3250k all applications require additional heatsink. for factory fitted heatsink see mr16 / mr16-lv datasheet.
mdexlumpwmr_a dialight corporation 1501 route 34 south ? farmingdale, nj 07727 usa tel: (1) 732-919-3119 ? fax: (1) 732-751-5778 ? www.dialight.com compatible drivers note: lumen output based on manufacturers data *based on max vf of 4.0v **1.2a for initial switch on heatsink performance note operating characteristics operating conditions p max case temp = 85oc @ 350ma p pwmr requires constant current driver pwmrd requires constant voltage driver (see compatibility list) p max drive current 700ma (constant current version) p modules require additional heatsinking for lumen maintenance figures. p ip20 rating photometric data dialight europe ltd exning road ? newmarket ? suffolk, united kingdom, cb8 0ax tel :+44 (0)1638 666541 ? www.dialight.com model / colour typical total lumen output power consumption drive current / operating current input voltage 350ma / lv 700ma 350ma / lv 700ma ma pwmr / cw 400 720 4.8w 9.6w 350 - 700 *13.5 -16vdc pwmr / nw 400 720 pwmr / ww 200 380 pwmrd / cw 400 - 5.0w - **300ma 24vdc pwmrd / nw 360 - pwmrd / ww 200 - any custom designed heatsink must maintain a maximum case temperature of 85oc or less for the required working ambient temperature. relative light output degrees datasheet subject to change without notice. please visit www. dialight.com for updates.
|